Error when trying to create Single-node Server Pool

We have an existing Oracle VM environment at our company that I have taken over support of. I would like to add a new Oracle VM server to the Manager, but I want it to be in it's own separate Server Pool by itself (no HA).
When creating the Server Pool in Oracle VM Manager, I am able to enter the new server information, assign all the roles and test the connection properly. However, when I hit next, I receive this error:
OVM-1011 Oracle VM Server newServerName.domain.net:MyPassword operation Checking Shared Storage failed: failed:<TypeError: list indices must be integers> .
The Oracle VM server is version 2.2, and I accepted most of the defaults when installing (local OVS formatted as ocfs2).
The Oracle VM Manager is version 2.1.5.
Thanks in advance for any help.

I have a VM Manager 2.2 that is managing a VM Server 2.0 (10.10.10.11). I am adding a second VM Server 2.2 as a separate environment with its own storage pool for management. I couldn't.
Error
OVM-1011 OVM Manager communication with 10.10.10.12 for operation Pre-check cluster root for Server Pool failed: <Exception: Cluster root not found.>
What does this cluster root not found means? I just want to use the same VM Manager to manage another independent VM Server. Is this possible?

Similar Messages

  • JDeveloper - Error when trying to create an application server connection

    Hello everyone,
    I am trying to use JDeveloper to create a connection an Oracle WebLogic Server configured for Oracle SOA Suite. When I navigate to Connections and click on Application Server Connection, JDeveloper produces and error with the diagnostics shown below. I'm new to using JDeveloper so any help or advice on how to start to resolve this issue would be greatly appreciated. Fore the record I'm using JDeveloper 11G R2 (11.1.2.1.0) running on a Linux Red Hat 5 64 bit server.
    Performing action (39) Close All [ from  ] [ for ( <none>, MasterBuildScript.jpr, Infrastructure.jws ) ]
    Performing action (272) New Application... [ from ExplorerWindowImpl ] [ for ( <none>, MasterBuildScript.jpr, Infrastructure.jws ) ]
    Invoking command: [ from ExplorerWindowImpl ] [ for ( <none>, MasterBuildScript.jpr, Infrastructure.jws ) ]
    18-Oct-2011 10:37:02 oracle.adfinternal.rc.connection.AdfConnectionContextProvider getConnectionContext()
    SEVERE:
    oracle.adf.rc.exception.CatalogRuntimeException: error while obtaining a connection context using connection context provider [oracle.adfinternal.rc.connection.AdfConnectionContextProvider] Root Cause=[]
         at oracle.adfinternal.rc.connection.AdfConnectionContextProvider.getConnectionContext(AdfConnectionContextProvider.java:92)
         at oracle.adfinternal.rc.connection.ConnectionManagerImpl.getConnections(ConnectionManagerImpl.java:385)
         at oracle.jdeveloper.rescat2.model.registry.RescatContext.getConnectionContext(RescatContext.java:220)
         at oracle.jdeveloper.rcasadapter.rescat2.RescatContextStore.<init>(RescatContextStore.java:56)
         at oracle.jdeveloper.asnav.wizard.RescatAppServerWizard.setResourcePaletteStore(RescatAppServerWizard.java:99)
         at oracle.jdeveloper.asnav.wizard.RescatAppServerWizard.createWizardControl(RescatAppServerWizard.java:87)
         at oracle.jdeveloper.rcasadapter.wizard.AppServerProviderWizard.invoke(AppServerProviderWizard.java:93)
         at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:446)
         at oracle.ide.wizard.WizardManager$1.run(WizardManager.java:530)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
         at java.awt.EventQueue.access$000(EventQueue.java:85)
         at java.awt.EventQueue$1.run(EventQueue.java:603)
         at java.awt.EventQueue$1.run(EventQueue.java:601)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
         at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
         at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Caused by: java.lang.NullPointerException
         at oracle.adfinternal.rc.connection.UncloseableContextWrapper.wrapContext(UncloseableContextWrapper.java:59)
         at oracle.adfinternal.rc.connection.AdfConnectionContextProvider.getConnectionContext(AdfConnectionContextProvider.java:79)
         ... 24 more
    oracle.adf.rc.exception.CatalogRuntimeException: error while obtaining a connection context using connection context provider [oracle.adfinternal.rc.connection.AdfConnectionContextProvider] Root Cause=[]
    o.adfinternal.rc.connection.AdfConnectionContextProvider.getConnectionContext(AdfConnectionContextProvider.java:92)
    o.adfinternal.rc.connection.ConnectionManagerImpl.getConnections(ConnectionManagerImpl.java:385)
    o.j.rescat2.model.registry.RescatContext.getConnectionContext(RescatContext.java:220)
    o.j.rcasadapter.rescat2.RescatContextStore.<init>(RescatContextStore.java:56)
    o.j.asnav.wizard.RescatAppServerWizard.setResourcePaletteStore(RescatAppServerWizard.java:99)
    o.j.asnav.wizard.RescatAppServerWizard.createWizardControl(RescatAppServerWizard.java:87)
    o.j.rcasadapter.wizard.AppServerProviderWizard.invoke(AppServerProviderWizard.java:93)
    o.i.wizard.WizardManager.invokeWizard(WizardManager.java:446)
    o.i.wizard.WizardManager$1.run(WizardManager.java:530)
    j.a.event.InvocationEvent.dispatch(InvocationEvent.java:209)
    j.a.EventQueue.dispatchEventImpl(EventQueue.java:642)
    j.a.EventQueue.access$000(EventQueue.java:85)
    j.a.EventQueue$1.run(EventQueue.java:603)
    j.a.EventQueue$1.run(EventQueue.java:601)
    j.security.AccessController.doPrivileged(Native Method)
    j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
    j.a.EventQueue.dispatchEvent(EventQueue.java:612)
    o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
    o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
    j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    j.a.EventDispatchThread.run(EventDispatchThread.java:122)
    Caused by:
    java.lang.NullPointerException
    o.adfinternal.rc.connection.UncloseableContextWrapper.wrapContext(UncloseableContextWrapper.java:59)
    o.adfinternal.rc.connection.AdfConnectionContextProvider.getConnectionContext(AdfConnectionContextProvider.java:79)
    o.adfinternal.rc.connection.ConnectionManagerImpl.getConnections(ConnectionManagerImpl.java:385)
    o.j.rescat2.model.registry.RescatContext.getConnectionContext(RescatContext.java:220)
    o.j.rcasadapter.rescat2.RescatContextStore.<init>(RescatContextStore.java:56)
    o.j.asnav.wizard.RescatAppServerWizard.setResourcePaletteStore(RescatAppServerWizard.java:99)
    o.j.asnav.wizard.RescatAppServerWizard.createWizardControl(RescatAppServerWizard.java:87)
    o.j.rcasadapter.wizard.AppServerProviderWizard.invoke(AppServerProviderWizard.java:93)
    o.i.wizard.WizardManager.invokeWizard(WizardManager.java:446)
    o.i.wizard.WizardManager$1.run(WizardManager.java:530)
    j.a.event.InvocationEvent.dispatch(InvocationEvent.java:209)
    j.a.EventQueue.dispatchEventImpl(EventQueue.java:642)
    j.a.EventQueue.access$000(EventQueue.java:85)
    j.a.EventQueue$1.run(EventQueue.java:603)
    j.a.EventQueue$1.run(EventQueue.java:601)
    j.security.AccessController.doPrivileged(Native Method)
    j.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
    j.a.EventQueue.dispatchEvent(EventQueue.java:612)
    o.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
    o.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
    j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    j.a.EventDispatchThread.run(EventDispatchThread.java:122)
    Thanks,
    Shaun.

    Not sure if this is a cause for your error, but JDev11.1.2.1.0 doesn't work with SOA right now. For SOA you need to use jdev11.1.1.5.0 or lower.
    Timo

  • 500 internal server error when trying to create users

    I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.

    Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
    For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

  • Error when trying to create a JCO Destination

    Hi
    I receives the following error when trying to creat a JCO Destination, clicking on the button in the host:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
    I get the following error:
    Error stacktrace:
    java.lang.NullPointerException
         at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:880)
         at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
         at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:272)
         at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:237)
         at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:144)
         at com.sap.tc.webdynpro.tools.sld.wdp.InternalNameDefinition.wdDoInit(InternalNameDefinition.java:223)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:620)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:263)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:740)
         at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:350)
         at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:640)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
         at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    Any ideas?
    Regards
    Kay-Arne

    Hi,
    Have you configured your SLD? Check JCO Destination error out or search for "com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus" in the SDN forums.
    Best regards,
    Vladimir

  • Error when trying to create a site collection

    Hi, 
    I receive the following error when trying to create a site collection in sharepoint 2013. Any ideas of what I can do to resolve?
    Sorry, something went wrong
    Failed to call GetTypes on assembly Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.ConnectionUsageDefinition'
    from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.RequestUsageDefinition'
    from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.LoadUsageDefinition'
    from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. Method 'ParseLogFileEntry' in type 'Microsoft.AnalysisServices.SharePoint.Integration.UnloadUsageDefinition'
    from assembly 'Microsoft.AnalysisServices.SharePoint.Integration, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation.
    thanks,
    Sherazad

    Hi  ,
    Based on the error message, please check whether you have installed the spPowerPivot.msi add-in on each of your SharePoint server, and ran the configuration wizard, make sure that the powerpivotwebapplicationsolution.wsp
    is deployed correctly.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Portal runtime error when trying to create new Iviews in EP

    Hi
    Require an Urgent help
    getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView  in portal.
    It was working before please see this error message
      Portal Runtime Error
    An exception occurred while processing a request for :
    iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
    Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
    Error occurs during the rendering of jsp component.
    Exception id: 05:20_12/01/08_0004_17115850
    See the details for the exception ID in the log file
    AM Iworking on NW2004s sp11. I was able to create iViews on this system before
    let me know where to check the log file also. Points will be awarded
    Thank you
    Krishna Kanth
    Edited by: siddi siddi on Jan 13, 2008 12:05 AM

    Krishna Kanth,
    logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
    prachi

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • Solution to stop error when trying to create a portfolio

    Hi all,
    I finally found a way to make a portfolio in acrobat pro 9. The problems I was having were explained in the thread titled "Acrobat pro 9 has a stop error when trying to create a portfoloi"
    It seems ther is another way to do this, by selecting 'combine' and then 'merge files into a single pdf' rather than 'assemble pdf portfolio'.
    The merge option also gives the choice of making a pdf package and does not result in a stop error with authplay.dll.
    So much for Adobe support who conuld not tell me this or respond to support requests.
    All I have to do now is to remember to not click on 'assemble pdf portfolio' when I want to assemble a pdf portfolio but "merge files into a single pdf" when I want to assemble a pdf portfolio.
    I would still like to hear from Adobe why acrobat pro 9 has a stop error with authplay.dll.
    I feel a lot happier now.

    I read through the pdf wth your emails to/from customer support. I'll have to defer to someone else because it seems you have tried what I would suggest.
    If someone else does not respond with a better plan and you are willing to spend a bit more time before writing off Acrobat 9, I would try the process below one last time. (If you are using a CS suite, while authplay.dll is found in each of the directories, it does not appear that the issue extends to the other programs.)
    1. Using Add/Remove Programs, uninstall all Adobe Acrobat and Reader software and uninstall the Adobe Flash Player Active X and Adobe Flash Player Plugin. If you have it, uninstall Adobe Air.
    2. In C:\Documents and Settings\(your profile name)\Application Data\Adobe, delete the Acrobat and Adobe PDF folders if they still exist.
    3. Reinstall only Acrobat 9.
    4. From Acrobat, run the updater Help > Check for Updates and install all updates.
    5. Verify Adobe Acrobat is now version 9.2: Help > About Adobe Acrobat Pro  (If for any reason it is not 9.2, use the update on http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    6. Test
    Message was edited by: Anna Nmty
    While searching for a solution, I just saw your post over at acrobatusers.com (http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15765). Looks like my advice was largely a duplicate, although your event log indicates Acrobat did not update properly.

  • Sharepoint designer 2010 32 bit error when trying to create a workflow

    Windows 7 64 bit enterprise pc's with sharepoint designer 32 bit see these errors when trying to create a workflow on any Sharepoint 2010 farm - dev and production
    "The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly is Microsoft.Office.Workflow.Actions, Version=14.0.0.0 ..."
    "The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly is Microsoft.SharePoint.WorkflowActions, Version=14.0.0.0 ..."
    "The list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly is Microsoft.SharePoint, Version=14.0.0.0 ..."
    Using an XP pc and 32bit designer user able to create workflow. We have to use 32 bit designer as we have Office 2010 32 bit for compatiblility reasons
    Any ideas on how to resolve?

    Hi Nick, check out this link for possible solutions:
    https://mohamedelkassas.wordpress.com/2014/12/26/the-list-of-workflow-actions-on-the-server-references-an-assembly-that-does-not-exist-some-actions-will-not-be-available/
    cameron rautmann

  • Error when trying to create XUSER information for SAPServiceSID

    Hi all,
    I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install..  Does anyone know a FIX for this?
    >xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
    FATAL: Close xuser entry failed: could not write USER data [1307]
    I am running the command as the SIDADM user. 
    I have tried the solutions in the following notes without success:
    39642
    1542818
    39439
    1875264
    1409913
    Thanks!

    Hi Jayson,
    Try this.
    Solution
    Add the "Administrators" group under:
    Control Panel
    -> All Control Panel Items
       -> Administrative Tools
          -> Local Security Policy
             -> Local Policies
                -> User Rights Assignment
                  -> Take ownership of files or other objects
    You check you command and modify.
    xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
    Regards,
    V Srinivasan

  • I get this error when trying to create a ringtone - iTunes could not connec

    I get this error when trying to create a ringtone:
    "iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
    But I CAN connect - if I click on the iTunes Store, it connects right away.
    I want to make a ringtone from a song that I purchased, but all I get is the same error message.
    iTunes 9.2.2, Ireland iTunes Store.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

  • "Operation is not valid due to the current state of the object" error when trying to create a link for a shared folder in OneDrive

    I'm trying to share a folder in OneDrive with another user in my organization, and create a link so that people outside of the company can see the folder. Whenever I try to create a link I get an error that says: "Couldn't create the link sorry something
    went wrong operation is not valid due to the current state of the object" How do I resolve this?

    Hi,
    Sorry for replying late and I noticed that you posted another thread in this forum:
    http://social.technet.microsoft.com/Forums/en-US/2b8c6f54-9c59-4b37-b28f-1d49a1b7913b/operation-is-not-valid-due-to-the-current-state-of-the-object-error-when-trying-to-create-a-link?forum=officeitpro
    I've replied and kindly refer to it to see if it is helpful.
    Regards,
    Melon Chen
    TechNet Community Support

  • Error when trying to create a new Voyager Workspace through Infoview

    Hi,
    When trying to create a new Voyager Workspace through Infoview, I get the following Error
    "An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
    I clicked on New Voyager Workspace & then it displays the list of connections available. When, I click on any connection , then I receive thefollowing error
    "An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
    An Insight of our environment regarding this, we have an clustered environment with Voyager Installed. Platform is Windows Server 2003. We have all the required Microsoft client tools installed on the Production Servers.
    This was working fine earlier. We were able to create Voyager WorkSpace at one instance of time. The problem at that point of time was the MDAS Server was not showing up in CMC, i.e as we had clustered environment, only one of the MDAS Server was showing up in the CMC. it was missing the other MDAS Server. but, at that time we were able to create Voyager Workspace.
    So, in order to view the other MDAS Server in CMC, we had changed the name of the Server in CCM for both the MDAS Servers.
    In detail, Server A.MDAS Server & Server B.MDAS Server- they both were not showing up in CMC. only one of them was showing up in Servers list in CMC.
    So, in CCM we had changed the name of Server1.MDAS server to be Server1 &
    for Server2.MDAS Server to be Server1 as well.
    AFter this both the MDAS Servers were showing uo in CMC.
    but, when I login into Infoview & click on new Voyagerworkspace & select a connection, I recieve the follwoing error
    "An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
    Request to let me know the possible steps in resolving this ASAP

    Hi,
    Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
    It is possible that you dont have development authorization.
    Also the issue could be that the system is not configured to create the objects begining with Z.
    Check this with basis as well.
    Thanks
    Ajeet

  • A report that uses tablix returns error when trying to deploy to Report Server 2005

    We have some reports that have been built using tablixes, and tested in a 2008 Report Server. When trying to deploy to Report Server 2005 (don't ask why) we get an error saying
    The report definition is not valid. Details: The element 'ReportItems' in namespace 'XXXXXX' has invalid child element 'Tablix'
    So.. what is the issue? I guess 2005 does not support tablixes.. And we cannot upgrade the server version. So the real question is.. is there a workaround for this to avoid having to remake those reports for 2005??
    Thanks!
    Juan Pablo Realini .Net Developer in developement, musician, Star Wars fan, married, father of 2 1/2

    Hi Shei Pi,
    Unfortunately Microsoft provide upgrade option only, not downgrade  .
    SSRS 2005 report can be seen in 2008.. but 2008 report cant seen in 2005.
    One guy created the utility which is paid, to convert the report from 2008 version to 2005.
    You can see similar thread in MSDN here, you can find the paid utility  link also for this issue.
    https://social.msdn.microsoft.com/forums/sqlserver/en-US/bc5fbe11-531a-4a9d-861f-24625a9f4599/converting-rdl-file-of-ssrs-2008-to-ssrs-2005
    Thanks
    Prasad

  • Propagation error when trying to download inventory from server

    Hi there,
    Has anyone seen the following error when trying to download an inventory from the server.:
    Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
    import:
    BUILD FAILED
    C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
    Additional Information:
    The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
    INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
    INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
    INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
    INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
    ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
    ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
    WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
    WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
    INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
    INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
    ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
    Total time: 14 seconds
    Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
    Please note changing the maintenace mode makes no difference.

    Please enable Verbose Logging on the propagation servlet
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
    and check the logs on the server, they might give a clue

Maybe you are looking for