Error when trying to cut /copy

Once I have Crystal Reports 10 open, while trying to do a cut copy I receive this error ; "CoInitialize has not been called". Also I can no longer open or save the report. I have to X out of Crystal and start all over. I have checked Event Viewer and there are no application errors reported. This only seems to happen in Crystal. Can anyone give me an idea of what might me causing these issues?
Tx Shirley

Very strange....
Has this always happened?
How Technical are you? If you know or use DebugDiag and/or Process Monitor they may show you what is going on.
I know what may be the cause GDIPlus.dll, It's MS Graphical Device Interface and there have been a few issues with it. Recently I heard there was a security problem detected also and MS just pushed out some updated.
Try changing your Video Resolution and DPI and if you can see if your PC's Video Card Drivers can be updated.
CR 10 was never supported on VM-ware so we can't use it as a test. After updating the above try uninstalling and reinstall VM-Ware Tools, it too has Video plug-in that may need to be refreshed/updated.
Thanks
Don

Similar Messages

Error when trying to cut or copy: "CoInitialize has not been called"

I just installed Dreamweaver CS4 on my desktop PC (running Vista). I have the same version (from the same disc) on my laptop with no issues. For some reason, whenever I try to cut or copy (not paste) anything on the code or design view, I get the following error: "CoInitialize has not been called." Very few answers out there on the internet, and the ones I've found I don't understand.
Can anyone help? It is so frustrating to not be able to copy text!
Thanks,
Micah

I just installed Dreamweaver CS4 on my desktop PC (running Vista). I have the same version (from the same disc) on my laptop with no issues. For some reason, whenever I try to cut or copy (not paste) anything on the code or design view, I get the following error: "CoInitialize has not been called." Very few answers out there on the internet, and the ones I've found I don't understand.
Try Step #4 in this TechNote:
http://kb2.adobe.com/cps/405/kb405604.html#main_dat
HTH,
Randy

Error 36 when trying to move copy or compress a .mpg file

Error 36 when trying to move, copy or compress a large .mpg file (32gb!)
please help I have tried everything on Google (dot_clean/safe mode etc) need help!

BDAqua wrote:
I hear 3rd Party, or HW Raid 0/1/5/10 are OK, but 6 months is the absolute most I got out of my many screaming RAID setups before they completely lost it!
Bummer. I'm not really doing this for speed though, just for total storage volume and constant, worry-free, no-brainer back-up. I guess RIAD in general is something I need to study up on. Would a simple mirror of one 500GB drive to another (back-up) - and do that twice - be a better, more reliable way to go?
I've used Tri-Backup3/4 for years for Backups, it's fast, automatic, reliable, works in the background if you wish...
Back-up software always seemed to have some kind of a hiccup to it, but I'll certainly look into Tri-Backup3/4. I used to Retrospect years ago, a rather fussy thing if I recall.
Now, on the Safe Mode boot - not a success BUT a different result!
I got the -36 again, but this time it was the external drive FILE that errored, not the OS-resident drive.
In other words, pre-Safe Mode the error said "...because some data in "ZillaHAL" could not be read or written." (ZillaHAL is my OS-X drive).
In Safe, it read, "...because some data in "WinXP Pro.vmem" could not be read or written."
"WinXP Pro.vmem" is the virtual machine file - which basically is a simple Mac volume (folder) containing all of the files to run my XP virtual machine.
Also, this time, a file* did manage to remain on the external drive whereas before, after the error, no file at all remained.
* a generic icon appears, but it shows a size of 16+GBs. The actual file is 18.13GB - I did manage to shrink it down the other day (from it's previous 25GB).
Well, that's it for now. I'll be away for three days, so don't mind me if I cannot reply back for a spell.
Thanks BD,
mp

Error when trying to convert excel files to pdf

I'm getting the following error when trying to convert .xls and .xlsx files to pdf, using the "Create PDF" option:
Error message from the primary converter:
ALC-PDG-010-012-PDFMaker reported an error while printing the document.
Word, Powerpoint and Text files convert without any issues. Also I'm able to opent the excel files and convert them to pdf using the acrobat option in excel.
Livecycle Version: 10.0.2, GM
MS Office Version: 2007
Any help would be appreciated. Thanks in advance.
Regards,
Suhail N.

It is always difficult when you need to convert multiple xls files to pdf or multiple sheets to pdf. If you have a single file to convert then the best method would be to copy your data to doc file and then convert it into PDF . If you have multiple files to convert then it is really difficult to convert all the files manually. Then the better method would be to use converter tool to convert excel to pdf . By doing this you can convert many files in just few seconds.

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I am getting a runtime error when trying to download itunes

I keep bgetting a runtime error when trying to download itunes

Not there aren't any special settings for this. You just use the Open In feature to save the document into Pages. You could have a font in the document that Pages doesn't like, maybe something that you copied and pasted from somewhere into the document that went corrupt. But there is nothing special about the way that you save a Word document into Pages. You save it like you save any document or file into a compatible app.

I keep getting an error when trying to install Java for OS X 2014-001

I was trying to download this because I was getting errors when trying open some applications saying you need Java 6 and it directed me to the download link for this but it always gets and error when installing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ install.log
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. Don't post more than is requested.
☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
☞ Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Errors when trying to update cs6 13.4 (I think) on Mac osx 10.8.4

Errors when trying to update cs6 13.4 (I think) on Mac osx 10.8.4.
I have a purchased copy. Downloaded patch which also does not work. Very frustrating.

is that photoshop cs6?
if yes, and you're trying to update to 13.1.2 from 13.0.1.2, uninstall ps cs6. reinstall using adobe application manager. close aam immediately after ps cs6 completes its installation.
open ps cs6, click help>updates and select 13.1.2. do not update to 13.0.1.2, first.

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

Follow this instruction exactly to the last line. It worked on mine.
Jolly Giant wrote:
daduser wrote:
"copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so
now try consolidating again.

Error when trying to cut /copy

Similar Messages

Maybe you are looking for