Error when trying to delete a query from production

Hi Experts,
When i tried to delete a query from production system using RSZDELETE, I am getting an error message like " Query object 42BYOKUXDNZBZKMC2VHR5Z19H is blocked. Deletion has been cancelled."
i went to E071 table using SE16,and found out the transports which contains this particular object.This transports have returned error code 8.
Can anyone help me on deleting this object entry from these requests?
How will I delete this particular object entry from these transport requests?
Thanks alot
Shobin

Hi Venkat,
Thanks alot for your quick reply.
I tried that also. But even those transports are not successful.
I would like to know what is the standard procedure to delete objects from a transport request in production.
Already, I unlocked the transport request to Modifiable status.
Thanks alot
Shobin

Similar Messages

Error when trying to delete a vendor from SC

Hi all,
I am encountering a problem when trying to delete a vendor from a contract and assign preferred vendor.
The messages are
"Enter exactly one partner of type preferred vendor"
"Partner data couldnot be determined".
In BBP_PD, I find two entries in partner table with partner_fct = 39.
I am also not able to delete one of this entry.
Please suggest.
Thanks
Nandalal

Hi Nandlal,
Can you see the business partner nos correctly for the vendors you are trying to assign?
Are these vendors assigned to pur org?
DO you get all greens in BBP_BP_OM_INTEGRATE?
BR
Dinesh

Error when trying to open new query from Bex

Hi guys,
I m trying to open query designer from Bex explorer and i get the following error: The macro 'sapbex.xla!reponewquery'cannot be found.
Can anyone please tell me how to rectify this? thanks in advance

Sunil,
Go to Business explorer>Analyzer>Business Explorer-->Installation check and click on Start button.
You will be able to know if its properly installed or not.
Also check note 197460;938540
-Doodle
Message was edited by: Doodle

Error while trying to delete the universe from CMS

Dear All,
I am getting "Unable to reconnect to the CMS XXXXXXXXX. The session has been logged off or has expired" error while trying to delete any universe from the CMS. I tried restarting tomcat but it didnt work. I am unable to delete any universe from CMS. We have BO XI R2 SP2 environment on Windows 2003 Server.
regards,
Umair

SAP NOTE - 1199539 gives a possible solution to this problem:
When attempting to delete or migrate a universe, the following error message appears:
"Unable to reconnect to the CMS BUSOBJDV.ACSAD.NCSU.EDU. The session has been logged off or has expired."
Environment
BusinessObjects Enterprise Premium XI Release 2 SP1 CHF15
JDK version 1.4.2_08
Tomcat version is the same as that shipped with the product
Cause
The universes and connection pages are special (AFAIK) compared to the other pages because they are pure JSP, while most of the other Central Management Console (CMC) pages still go though the CMC and use COM/C++ code unaffected by the Java Virtual Machine (JVM). If the JVM has not been updated against Eastern Daylight Savings Time (EDST), it may calculate the incorrect time locally, and problems may occur with token expiry or validation.
Resolution
Update the Tomcat JDK to JDK 1.5.0_11 for EDST:
1. Go to the Microsoft web site and verify if you have the time zone update installed.
2. Download JDK 1.5.0_11.
3. Install JDK 1.5.0_11 on your server.
4. Modify the JAVA_HOME here:
C:\Program Files\Business Objects\Tomcat\bin\setenv.bat
as follows:
set JAVA_HOME=C: \Program Files\Java\jdk1.5.0_11\jre
5. In Java Virtual Machine and Java Class Path, modify JAVA properties for Tomcat (Start > Programs > Tomcat > Tomcat Configuration > Java). Replace the default Business Objects JDK 1.4 directory:
C:\Program Files\Business Objects\j2sdk1.4.2_08
with JDK 1.5.0_11:
C:\Program Files\Java\jdk1.5.0_11
6. Go to Windows Time Zone (double-click Windows time) then on the Time Zone tab, select the automatically adjust clock for day light saving changes check box against EST time zone.
7. Restart Tomcat and the Central Management Server (CMS) and, if possible, reboot your computer.
Hope this works anyone facing this problem on Windows servers.
Not sure what the solution is for BO instances running on Solaris. We have business objects/Weblogic running on a solaris server. I tried just changing java home to jdk1.5.0_12 but this didn't work.

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

OVM 3: error when trying to delete a virtual machine

Hi,
I enclose below the error when trying to delete, using OVM MANAGER, a VM that has been wrongly created.
Thanks for you help.
Job Construction Phase
begin()
com.oracle.odof.exception.ObjectException: Caught during invoke method: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
Wed Mar 21 14:42:20 CET 2012
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
Wed Mar 21 14:42:20 CET 2012
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:393)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:382)
at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteVirtualMachine(FoundryDbImpl.java:1302)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
... 7 more
Job Aborted from server, cleaning up client.

HI,
I had this - the recommended solution was to re-install the OVM manager.

After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
As expected, cdm-git also works fine since DMs only work in the root mode as of now.
Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
Last edited by looki (2014-08-23 13:04:49)

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

Getting a 1809 error when trying to remote control PC from the Console.

This is message i get when trying to remote view or remote control PC.....
1809: An error has occurred while generating a session key for
encryption.The remote session cannot be initiated. Contact Novell
Techical Services and specify this code.

This is for a 1807 error. My error is and 1809 error. Is there somewhere
else to research on a 1809 error when trying to remote control PC from
the Console?
> Perhaps.................
>
> http://support.novell.com/techcenter/search/search.do?
cmd=displayKC&docType=kc&externalId=10094808html&s liceId=&dialogID=2356487
>
> --
> Craig Wilson
> Novell Product Support Forum Sysop
> Master CNE, MCSE 2003, CCNA
>
> Editor - http://www.ithowto.com
>
> (Seeking Full-Time Expert? Drop me a note :> )
> <[email protected]> wrote in message
> news:09i_e.2044$[email protected]..
> > This is message i get when trying to remote view or remote control
PC.....
> >
> >
> > 1809: An error has occurred while generating a session key for
> > encryption.The remote session cannot be initiated. Contact Novell
> > Techical Services and specify this code.
>
>

I have deleted one query from production server

some one have deleted one query from production server. i would like to know who has deleted that query.
pls let me ASAP.
regards
raja

Hi,
You can get the time stamp( when it was deleted) from table RSRDELREPORTS. Based on that time check with basis guys to get the more info.
regards,
raju

Getting No checksum error when trying to delete uploaded file

When trying to delete an uploaded file I get the following error :-
No checksum was provided to show processing for a page that requires a checksum when one or more request, clear cache, or argument values are passed as parameters.
I have a tabular report displaying the uploaded files with one of the columns showing a delete icon.
When you select the delete icon it has Column Link details of the following
Link Text : <img src="#APP_IMAGES#del.gif">
Link Attribute : &APP_ID.
Target: URL
Url:
javascript:confirmFileDelete(htmldb_delete_message,'f?p=&APP_ID.:11:&SESSION.:REMOVE_ID:&DEBUG.::P11_DELETE_ID:#FILE_ID#');
The above was working till I turned on the Session State Protection.
I believe I need to add a checksum to my url via the pl/sql package apex_util.prepare_url but can someone please show me how to do from my URL????
Thanks in advance
Keith

Keith,
Why not do the following then...
I think confirmDeleteFile is a custom function correct? As the second parameter, just pass in the file ID. Then in the function use JavaScript to set the value of P11_DELETE_ID to the file ID. Then call doSubmit('REMOVE_ID');
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Getting an error when tried to access task form from worklist app

Hi All,
I am using 10.1.3.4 BPEL PM. I have created a bpel process with a human task.
From the worklist application, when the approver clicks on: Task Id (ideally it should open task form).
In my case, I am getting an error:
Error while inoking URL to display the content. Error while invoking URL. http://bluejays.appsassociates.com:7780/default/EditPayloadPOC1/v2009_05_21__82618/EditPayloadPOC1/EditPayloadPOC1.jsp Check the underlying exception and correct the error. Contact oracle support if error is not fixable..
If you need more information, please check with your administrator with the following exception-identifier: "2009/05/21_12:16:43:777_oc4jadmin"
It works fine in SOA suite 10.1.3.1. and does not work in BPEL PM 10.1.3.4
The only difference is I deployed in 10.1.3.1 using Ant script of bpel project and in 10.1.3.4 I deployed using the BPEL Console itself by browsing the project jar(Since I am getting error when tried to deploy it using Ant).
Is it a known bug or am I making anything wrong. Tried with both Autogeneration and Custom form
I followed: http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28981/workflow.htm#BABCBAEI
Thanks
Sakrishna Panuganti

Hi does your bpel process has more than one human tasks, e.g., HumanTask1, HumanTask2, HumanTask3...then pl. check and manually fix this below ...e.g.,
check for all of the human tasks workflow contexts tasks forms for dynamic pointers for
domain_id, process_id, process_version.
edit public_html/HumanTask1/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask1</context-root>
edit public_html/HumanTask2/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask2</context-root>
edit vi public_html/HumanTask3/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask3</context-root>
and deploy the process again via jdeveloper or preferably via ant script and try, it worked just fine for us.

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Error when trying to delete data from 0Plant

I am trying to delete the master data from 0Plant and get the following message:
The system is unable to delete all of the specified m
because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no lo
Is there a workaround? Thanks

Hi Niten,
You can delete the Master Data which are not used still. (As the SIDs are not mapped to the DIM Tables)
Then regarding the used ones ::: If you upload the Masterdata again with modifications, it will overwrite and after the attribute chage run you will see the modified Master Data.Hope this will solve your problem
regards
Happy Tony

Why do I keep getting an unknown error when trying to download an app from the app store on my iPod touch 4th generation when I put in the correct password?

I keep getting the same unknown error has occurred when trying to download an app what is wrong?

as an example.. from the sprint forum for a different device (unsure what device.. it's just not an iphone since no iphone or ios device has these settings -- ive seen this advice several times and I believe it's some form of android.. but not sure)
advice from the carrier advisor --
"Clear data in the Dialer and Dialer storage.... under manage Applications> All.
That is Settings - Applications - Choose All to view All choices - then find Dialer and clear the Data. Repeat this for the Dialer Storage as well. I personally also deleted the message thread first from the text message window and my log history which is a menu item from your call screen."
and another for you from a customer -- it is sprint again.. but this time a Samsung Epic
"OMG ... if someone can't tell me how to fix this "9230: Message sent using invalid number of digits..." error, I'm going to scream. My husband and I both have Sprint Epic phones and love them EXCEPT for this one problem! Help!"
Maybe they should sue Samsung?

Error when trying to delete a query from production

Similar Messages

Maybe you are looking for