Error when trying to delete data from 0Plant

I am trying to delete the master data from 0Plant and get the following message:
The system is unable to delete all of the specified m
because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no lo
Is there a workaround? Thanks

Hi Niten,
You can delete the Master Data which are not used still. (As the SIDs are not mapped to the DIM Tables)
Then regarding the used ones ::: If you upload the Masterdata again with modifications, it will overwrite and after the attribute chage run you will see the modified Master Data.Hope this will solve your problem
regards
Happy Tony

Similar Messages

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error when trying to extract data from Solman to BI 7

Hi,
We are trying to extract data from Solman 7 to BI 7. The following extractors have been activated on Solman since we want to be able to report CCMS ALERTS and System availability on Bi Portal.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
0SM_SMG_ROOT Oberster Knoten Solution Manage
0SM_SMG Solution Manager
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
Our current situation is that we have scheduled the jobs through Solution_manager > solution Reporting > BI Data collection. Yet no data has been collected and the jobs are getting cancelled.
Has anyone come accross this same situation before? Plus I have just found out that on SOLMAN_WORKCENTER under System Monitoring there is a reporting step named IT PERFORMANCE reporting that needs to be configured.
Please advice since this will be critical for our busines.

Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Error when trying to retrieve data from Essbase

Hi There
I running OBIEE 10.1.3.4.0 and Essbase 9.3.1. When im trying to update member count for instance(from administration tool) it gives me the following errors.
nQSError 10058, nQSError 43093 and Essbase Error 1260046. This is when im testing against an Essbase I have developed for my self. If I try using one of the supplied sample databases it works fine...
Does anybody have an idea about what could be wrong?
Any pointers would be much appreciated!
Regards, Jacob

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

OVM 3: error when trying to delete a virtual machine

Hi,
I enclose below the error when trying to delete, using OVM MANAGER, a VM that has been wrongly created.
Thanks for you help.
Job Construction Phase
begin()
com.oracle.odof.exception.ObjectException: Caught during invoke method: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
Wed Mar 21 14:42:20 CET 2012
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:151)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:751)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_2007E Find object name: (0}, class: interface com.oracle.ovm.mgr.api.virtual.VirtualMachine, returned null
Wed Mar 21 14:42:20 CET 2012
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:393)
at com.oracle.ovm.mgr.api.manager.OvmManagerImpl.deleteObject(OvmManagerImpl.java:382)
at com.oracle.ovm.mgr.api.system.FoundryDbImpl.deleteVirtualMachine(FoundryDbImpl.java:1302)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:247)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:207)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
... 7 more
Job Aborted from server, cleaning up client.

HI,
I had this - the recommended solution was to re-install the OVM manager.

ORA-01552 Error when trying to import data

I get the following error when trying to import data into my database. My version is as follows:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
and I get the following error:
ORA-01552: cannot use system rollback segment for non-system tablespace
Any help would be appreciated.
Also when I upgraded my database I received the following error message but continued without fixing:
Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
Can I fix this via an sql statement or what?

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Error when trying to delete a vendor from SC

Hi all,
I am encountering a problem when trying to delete a vendor from a contract and assign preferred vendor.
The messages are
"Enter exactly one partner of type preferred vendor"
"Partner data couldnot be determined".
In BBP_PD, I find two entries in partner table with partner_fct = 39.
I am also not able to delete one of this entry.
Please suggest.
Thanks
Nandalal

Hi Nandlal,
Can you see the business partner nos correctly for the vendors you are trying to assign?
Are these vendors assigned to pur org?
DO you get all greens in BBP_BP_OM_INTEGRATE?
BR
Dinesh

8008 Error when trying to download movies from iTunes

I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
Thanks,

Morning pettis360,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Hope this helps,
Mario

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Propagation error when trying to download inventory from server

Hi there,
Has anyone seen the following error when trying to download an inventory from the server.:
Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
import:
BUILD FAILED
C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
Additional Information:
The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
Total time: 14 seconds
Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
Please note changing the maintenace mode makes no difference.

Please enable Verbose Logging on the propagation servlet
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
and check the logs on the server, they might give a clue

Getting No checksum error when trying to delete uploaded file

When trying to delete an uploaded file I get the following error :-
No checksum was provided to show processing for a page that requires a checksum when one or more request, clear cache, or argument values are passed as parameters.
I have a tabular report displaying the uploaded files with one of the columns showing a delete icon.
When you select the delete icon it has Column Link details of the following
Link Text : <img src="#APP_IMAGES#del.gif">
Link Attribute : &APP_ID.
Target: URL
Url:
javascript:confirmFileDelete(htmldb_delete_message,'f?p=&APP_ID.:11:&SESSION.:REMOVE_ID:&DEBUG.::P11_DELETE_ID:#FILE_ID#');
The above was working till I turned on the Session State Protection.
I believe I need to add a checksum to my url via the pl/sql package apex_util.prepare_url but can someone please show me how to do from my URL????
Thanks in advance
Keith

Keith,
Why not do the following then...
I think confirmDeleteFile is a custom function correct? As the second parameter, just pass in the file ID. Then in the function use JavaScript to set the value of P11_DELETE_ID to the file ID. Then call doSubmit('REMOVE_ID');
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Ip adress not recognized in windows explorer when trying to transfer data from my PC to my TC via ethernet.

Hello,
I currently have a Time capsule and a Pc with a Windows 7 operating system. Im trying to transfer data from my PC to my Time Capsule via ethernet cable because wirelessly takes too much time given that I have a lot of data to transfer. In my Airport Utility I already set my workgroup to "WORKGROUP" and the file sharing to "write and read", I also disconnected the Wifi on my Pc so the ethernet would work without confusions. But when I type my Time Capsule's Ip address in my windows Explorer it opens a page that says something like "this website is not available". Maybe I did something wrong while setting up the time capsule for file sharing. What are the correct steps for me to be able to transfer data from my PC to my time capsule via ethernet cable?

I do not normally use a PC, but we have a guest here this week with a PC using Windows 7 which allows for some "testing" on the network.
What is the Ethernet connected IP address of the Time Capsule? Mine is 10.0.1.2
If we open Windows Explorer and type in
\\10.0.1.2
the Time Capsule drive is immediately seen on the PC once I enter the device password for the TC to connect.
I can also type in the name of the Time Capsule and things work the same way. My Time Capsule name is TC
\\TC
brings up the same log in as the IP address method above
We have not tried mapping the drive, but might. Will post on results if we do that.

Error when trying to delete data from 0Plant

Similar Messages

Maybe you are looking for