Error when trying to extend range using an Extreme connecting to a Express

Ok,
My cable modem is connected just fine to my AE. I can run iTunes (which is nice!) off of it, connect to the internet off of my MBP and all. I just bought a AEBS to be able to EXTEND the range of my connection for all of my small townhome. However, when I go to through the Airport Setup Assistant to try and set it up, it keeps coming back with an error that says "Error Setting up WDS" or something like that. I've tried this multiple times. I've tried resetting both the AE and the AEBS...still doesn't work. Any clue?
Thanks,
Ryan

It sounds like you have an older "b/g" Airport Express (AX) and you have configured the device to "join" your wireless network. When the "b/g" AX is configured this way, the ethernet port is not active.
Follow the instructions to setup a WDS arrangement with both of your AX devices. One must be configured as a WDS "main" and the other as a WDS "remote".
Apple's step by step instructions to do this are found on pages 42-44 in the Designing AirPort Networks Guide
If both of your AX devices are newer 802.11"n" devices, you can use a different type of setup. Post back to confirm if that is the case.

Similar Messages

  • Gettign this error when trying to access webpage using JRE V 1.4.2_06

    Gettign this error when trying to access webpage using JRE V 1.4.2_06
    Any suggestions?
    java.io.IOException
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
    at sun.plugin.cache.FileCache.get(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
    at java.io.BufferedInputStream.fill(Unknown Source)
    at java.io.BufferedInputStream.read1(Unknown Source)
    at java.io.BufferedInputStream.read(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
    ... 21 more
    java.io.IOException
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
    at sun.plugin.cache.FileCache.get(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
    at java.io.BufferedInputStream.fill(Unknown Source)
    at java.io.BufferedInputStream.read1(Unknown Source)
    at java.io.BufferedInputStream.read(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
    ... 21 more
    load: class com.adp.e.hrclient.Client.class not found.
    java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
    at java.io.BufferedInputStream.fill(Unknown Source)
    at java.io.BufferedInputStream.read1(Unknown Source)
    at java.io.BufferedInputStream.read(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)

    I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
    Metalink's note: 787739.1
    :)

  • Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

    Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
    Holding shift key and clicking refresh does not clear window.
    What else can be done to clear the window and gain access to my documents?

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Error when trying to register DB using srvctl

    Hello -
    I am getting this error when trying to add this database:
    PRKP-1073 : Cannot create database m433ddg because a database named m433ddg already exists.
    However, I have verified the DB does not exist:
    [oracle@ctolinuxpoc02 ~]$ crs_stat
    NAME=ora.ctolinuxpoc01.ASM1.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.LISTENER_CTOLINUXPOC01.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc02.ASM2.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.LISTENER_CTOLINUXPOC02.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    Any ideas are greatly appreciated!
    Thanks,
    Mike

    Hi Mike,
    I remember, you had an issue that you had a corrupted OCR once. That seems to be the case here again....
    In general, if SRVCTL complains that it cannot register a DB, since the DB with that name is already registered, this could be a sign that internally (obviously the former database does not show in the crs_stat output) Clusterware can still find fragments of the formerly registered DB. What you can try to do: run an ocrdump as root and check the output file for "m433ddg" and see whether it finds something.
    Let me know, please. Thanks,
    Markus
    Edited by: MarkusM on Apr 20, 2009 5:24 PM - Reason: typos

  • Error when trying to extend network from airport express to airport express

    I have an airport express in my house.
    I am trying to connect another airport express to extend the network.
    I am following the instructions but keep getting an error when it is resetting itself. I have done a hard reset on the airport express so it is in its default settings.
    I see both airports in the left window of the Airport Utility Application.
    I select the New Base Station and select Switch to switch the networks.
    I then rename and add a password to the new airport express. (continue)
    I then select "I want Airport Express to join my current network" (continue)
    I then select "Extend the range of my Airport Extreme or Airport Express network" so I can extend the internet connection (Continue)
    It then asks me to choose the Airport Express network I want to extend - I get a choice of my "Cameron Network" or "Apple Network xox##xo" which is my new Airport Express. I'm selecting "Cameron Network" - my current wireless internet connection. (Continue)
    I am then asked to select the Apple wireless device I want to join from the list.
    The only option is "Cameron Airport Express" (OK)
    I then get a message "Configuring main network for a new WDS remote"
    I then get an error "There was an error setting up this Apple Wireless Device for WDS. Quit AirPort Utility and try again"
    I've tried 10 times.
    What am I doing wrong??
    Thank you in advance for your help!

    It sounds like you have an older "b/g" Airport Express (AX) and you have configured the device to "join" your wireless network. When the "b/g" AX is configured this way, the ethernet port is not active.
    Follow the instructions to setup a WDS arrangement with both of your AX devices. One must be configured as a WDS "main" and the other as a WDS "remote".
    Apple's step by step instructions to do this are found on pages 42-44 in the Designing AirPort Networks Guide
    If both of your AX devices are newer 802.11"n" devices, you can use a different type of setup. Post back to confirm if that is the case.

  • Getting error when trying to extend standard VO with transient attributes

    Hello,
    I am trying to extend the standard VO ReqSummaryVO in iprocurement module and getting the error "Each Row in the Query Result Columns must be mapped to a unique Query Attribute in the mapped entity columns" at step 4. This VO has a lot of transient attributes. I have gone through solutions from other threads related to this error but none of them worked for me. Can someone help me on this please?
    Thanks,
    Girish.

    Hello,
    I am trying to extend the standard VO ReqSummaryVO in iprocurement module and getting the error "Each Row in the Query Result Columns must be mapped to a unique Query Attribute in the mapped entity columns" at step 4. This VO has a lot of transient attributes. I have gone through solutions from other threads related to this error but none of them worked for me. Can someone help me on this please?
    Thanks,
    Girish.

  • Oracle10g - getting error when tried to log in using SQL plus

    I have installed Oracle Database 10g with following settings
    A) In Select Installation Method with basic installation
    1) Global Database Name: orcl
    2) Database Password: srinu
    B) In Database Configuration Assistant shows following information
    Global Database Name: orcl
    System Identifier(SID):orcl
    c) Password management
    User Name SYS and SYSTEM shows accounts are not locked and password shows empty
    I have tried to log in using scott/tiger, SYS/srinu, SYSTEM/srinu, SYS, SYSTEM with providing no pass word
    Could you please provide me the details to connect Databse from SQL plus editor
    I have all the screen shots of the above settings
    I will appreciate any help

    Please find the commands and respective results below
    D:\Documents and Settings\Administrator>SET
    ALLUSERSPROFILE=D:\Documents and Settings\All Users
    APPDATA=D:\Documents and Settings\Administrator\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=D:\Program Files\Common Files
    COMPUTERNAME=SRINU
    ComSpec=D:\WINDOWS.0\system32\cmd.exe
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=D:
    HOMEPATH=\Documents and Settings\Administrator
    LOGONSERVER=\\SRINU
    NUMBER_OF_PROCESSORS=1
    OS=Windows_NT
    Path=D:\oracle\product\10.2.0\db_2\bin;D:\WINDOWS.0\system32;D:\WINDOWS.0;D:\WIN
    DOWS.0\System32\Wbem;D:\Program Files\Java\jdk1.5.0_19\bin;D:\Program Files\Apac
    he Software Foundation\Tomcat 6.0\bin;D:\Program Files\Java\jre1.5.0_19\lib;D:\o
    racle\product\10.2.0\db_2\BIN
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PERL5LIB=D:\oracle\product\10.2.0\db_2\perl\5.8.3\lib\MSWin32-x86;D:\oracle\prod
    uct\10.2.0\db_2\perl\5.8.3\lib;D:\oracle\product\10.2.0\db_2\perl\5.8.3\lib\MSWi
    n32-x86;D:\oracle\product\10.2.0\db_2\perl\site\5.8.3;D:\oracle\product\10.2.0\d
    b_2\perl\site\5.8.3\lib;D:\oracle\product\10.2.0\db_2\sysman\admin\scripts;
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0d08
    ProgramFiles=D:\Program Files
    PROMPT=$P$G
    SESSIONNAME=Console
    SystemDrive=D:
    SystemRoot=D:\WINDOWS.0
    TEMP=D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    TMP=D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    USERDOMAIN=SRINU
    USERNAME=Administrator
    USERPROFILE=D:\Documents and Settings\Administrator
    windir=D:\WINDOWS.0
    ============================
    D:\Documents and Settings\Administrator>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAY-2010 03:08
    :55
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 15-MAY-2010 23:44:31
    Uptime 0 days 3 hr. 24 min. 25 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File D:\oracle\product\10.2.0\db_2\network\admin\listener.o
    ra
    Listener Log File D:\oracle\product\10.2.0\db_2\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.51)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    ========================================
    D:\Documents and Settings\Administrator>lsnrctl service
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAY-2010 03:10
    :10
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: SRINU, pid: 3740>
    (ADDRESS=(PROTOCOL=tcp)(HOST=srinu)(PORT=1092))
    Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    Thanks,
    Srinivas

  • Error when trying to install oracle client (can't connect to X11 error)

    Hi guys,
    I need help to install Oracle Client 10g. I am quite a novice so I am totally hopeless when it comes to difficult or linux-kind-of-terms.
    I can't use GUI at all, so everything got to be done through putty.exe
    my local pc (where the putty is, IP 192.168.8.194) -> linux red hat 4 IP 192.168.8.31 (where the oracle client should be!)
    when I run the runIntaller I receieved error mentioning about DISPLAY variable haven't set yet.
    I did set it trhough putty as follow
    DISPLAY=192.168.8.194:0.0
    export DISPLAY
    no luck...I still hit an error that eventho this time the error is like below;
    =============================================================================
    Can't connect to X11 window server using '192.168.8.194:0.0' as the value of the DISPLAY variable.
    192.168.8.194:0.0
    192.168.8.194:0.0
    OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '192.168.8.194:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
    - Make sure that client users are authorized to connect to the X Server.
    OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
    % xhost +
    To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
    % <full path to xclock... see below>
    If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
    Typical path for 'xclock': '/usr/X11R6/bin/xclock'
    ==============================================================================
    When I run the xclock using GUI I can see it pop up on my screen, but when I run xclock trhough putty, I see that it just went blank...is that right because I am using putty or what?
    Can you guys please help? Everyone that had this problem like find the solution real easy...I just so frustrated because this setting is just not working, and I have no idea what to check. Do I need extra library or something to install this?
    Please remember that I can use GUI in my test server but I can't use any GUI at all when I am implementing this.
    Thanks thanks thanks.
    Daniel -

    Hi-
    You are right. putty is just a simple console without X11 in it. how come it didn't even cross my mind?
    Thanks for the reply. I solved it by using third party software called xdeep, from what I got from internet looks like this and the software you were talking about hold the same purpose. This xdeep is pretty easy to configure and in just few seconds I can launch the installer! Gee...!
    For those guys that having the same problem as me then find xdeep software from google and browse on the configure webpage. I found a step by step configuration setting from the internet too and it's real easy.
    Daniel -

  • Error when trying to run script using SDK at plugin startup

    Hi
    I am trying to run a script when my InDesign plugin is loaded. I referred to the PanelTreeView sdk sample as an example and implemented a StartupShutdown Boss
    In my implementation, in the startup() method I have the code to get the scriptManager and the scriptRunner for my javascript that I want to run. However, when my code hits the following line :
              InterfacePtr<IScriptRunner>theRunner(Utils<IScriptUtils>()->QueryScriptRunner(scriptFile) ); //scriptfile is ID script file that I want to run
              I get the error saying "Calling ScriptInfoDatabase::InitScriptInfoManager before resources have been registered".
    I am wondering how I can fix this error. or if this is too early to invoke scriptrunner, then is there some other place where I can invoke the scriptrunner to run my script
    this is how I have defined my StartupShutdown Boss class in  the .fr file
        Class
             kmyStartupShutdownBoss,
             kInvalidClass,
                 /** Implementation of IStartupShutdownService that runs a  scripts on startup */
                 IID_IAPPSTARTUPSHUTDOWN, kmyStartupShutdownImpl,
                 /** identify the service type */
                 IID_IK2SERVICEPROVIDER, kCStartupShutdownProviderImpl,
    Appreciate any help on this one .. thanks!
    Sameer

    Dependent on your InDesign version, you can schedule an IdleTask and do it from there, or just use a lazy startup.
    IID_IK2SERVICEPROVIDER,kLazyStartupShutdownProviderImpl,
    Again dependent on your InDesign version you should first check whether a script can run at all - some nasty other plugins may prevent that with modal dialogs.
    Finally there is the possibility to run startup scripts even without plugin ...
    Dirk

  • Error when trying to extend PoRequisitionLinesVO

    In order to personalise the iProc shopping cart, I need to add an extra attribute to the PoRequisitionLinesVO to use in a SPEL expression.
    I added the files from the oracle.apps.icx.por.schema.server and oracle.apps.icx.por.req.server and then extended the PoRequisitionLinesVO to add an extra column that calls a function in the database. The sql runs fine when tested in Toad.
    I then set the substitution and loaded the .jpx file using JPXImporter
    When I now try and go to the shopping cart in iProc (even before using this new attribute), I get the following error:
    This VO already seems to have a large number of transient attributes but I should still be able to add a new one. (Since there is no SQL Boolean type, I have used a number type and return either 0 or 1 for true or false)
    ## Detail 0 ##
    java.lang.NullPointerException
         at oracle.apps.fnd.framework.OAException.getAllMessageStackTraces(OAException.java:841)
         at oracle.apps.icx.por.common.server.ErrorUtil.handleFatalException(ErrorUtil.java:636)
         at oracle.apps.icx.por.req.server.RequisitionAMImpl.loadCurrentReqWithBuyerModifiedLines(RequisitionAMImpl.java:1204)
         at oracle.apps.icx.por.req.server.LoadReqSvrCmd.execute(LoadReqSvrCmd.java:66)
         at oracle.apps.icx.por.common.server.PorBaseAMImpl.executeServerCommand(PorBaseAMImpl.java:122)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:189)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:679)
         at oracle.apps.icx.por.common.webui.ClientUtil.invokeMethod(ClientUtil.java:964)
         at oracle.apps.icx.por.common.webui.PorBaseCOImpl.invokeMethod(PorBaseCOImpl.java:194)
         at oracle.apps.icx.por.common.webui.PorBaseCOImpl.executeServerCommand(PorBaseCOImpl.java:112)
         at oracle.apps.icx.por.req.webui.BaseShoppingCartCO.loadReq(BaseShoppingCartCO.java:511)
         at oracle.apps.icx.por.req.webui.ShoppingCartCO.processRequest(ShoppingCartCO.java:70)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:581)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1095)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:932)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:899)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:932)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:899)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2298)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1711)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at oa_html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
         at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
         at oa_html._OA._jspService(_OA.java:98)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)
    java.lang.NullPointerException
         at oracle.apps.fnd.framework.OAException.getAllMessageStackTraces(OAException.java:841)
         at oracle.apps.icx.por.common.server.ErrorUtil.handleFatalException(ErrorUtil.java:636)
         at oracle.apps.icx.por.req.server.RequisitionAMImpl.loadCurrentReqWithBuyerModifiedLines(RequisitionAMImpl.java:1204)
         at oracle.apps.icx.por.req.server.LoadReqSvrCmd.execute(LoadReqSvrCmd.java:66)
         at oracle.apps.icx.por.common.server.PorBaseAMImpl.executeServerCommand(PorBaseAMImpl.java:122)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:189)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:679)
         at oracle.apps.icx.por.common.webui.ClientUtil.invokeMethod(ClientUtil.java:964)
         at oracle.apps.icx.por.common.webui.PorBaseCOImpl.invokeMethod(PorBaseCOImpl.java:194)
         at oracle.apps.icx.por.common.webui.PorBaseCOImpl.executeServerCommand(PorBaseCOImpl.java:112)
         at oracle.apps.icx.por.req.webui.BaseShoppingCartCO.loadReq(BaseShoppingCartCO.java:511)
         at oracle.apps.icx.por.req.webui.ShoppingCartCO.processRequest(ShoppingCartCO.java:70)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:581)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1095)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:932)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:899)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:932)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:899)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:640)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2298)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1711)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
         at oa_html._OA._jspService(_OA.java:88)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
         at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
         at oa_html._OA._jspService(_OA.java:98)
         at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
         at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
         at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
         at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
         at oracle.jsp.JspServlet.service(JspServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
         at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
         at org.apache.jserv.JServConnection.run(JServConnection.java:294)
         at java.lang.Thread.run(Thread.java:534)

    Please confirm from dev guide and previous threads that u have followed all steps of extension properly.From error stack it looks likesubstitution is not don properly.
    This VO already seems to have a large number of transient attributes but I should still be able to add a new one. (Since there is no SQL Boolean type, I have used a number type and return either 0 or 1 for true or false)
    The existing number od transient VO attributes would effect a transient attribute, there isno limit on number of transient attributes.This is correct for boolean type of attribute u need to use decode in ur query for 0 and 1--Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Error when trying to extend schema

    Installing SCCM2012 R2 into my test domain.  I've created the System Management object and given permissions.  I ran the extadsch.exe file from the SMSSetup\Bin\x64 directory of the install media.  The result was "Failed to extend the
    Active Directory schema, please find details in "C:\ExtADSch.log".
    Looking at the log I see:
    <01-28-2014 07:51:56> Failed to create class cn=MS-SMS-Management-Point.  Error code = 8202.
    <01-28-2014 07:51:56> Failed to create class cn=MS-SMS-Server-Locator-Point.  Error code = 8202.
    <01-28-2014 07:51:56> Failed to create class cn=MS-SMS-Site.  Error code = 8202.
    <01-28-2014 07:51:56> Failed to create class cn=MS-SMS-Roaming-Boundary-Range.  Error code = 8202.
    <01-28-2014 07:51:56> Failed to extend the Active Directory schema, please find details in "C:\ExtADSch.log".
    So, I looked up Error code 8202.  The notes I see refer to:
    replication issues
    Account used to run the schema extension not a member of Schema Admins
    The account is definitely a member of the Schema Admins group.  I have 2 DCs in the test domain, the first server is 2008 R2, the second is 2012 R2.  I ran repadmin /showrepl and got the following:
    Repadmin: running command /showrepl against full DC localhost
    Default-First-Site-Name\WILDDC1
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: 0a9eca25-db8f-4b24-a1e5-40e4e346263a
    DSA invocationID: 0a9eca25-db8f-4b24-a1e5-40e4e346263a
    ==== INBOUND NEIGHBORS ======================================
    DC=WILD,DC=XXX,DC=XX,DC=XXX
        Default-First-Site-Name\WILDDC2 via RPC
            DSA object GUID: ec3bd941-b372-4094-a15a-7e0c218a9a9c
            Last attempt @ 2014-01-28 07:54:33 was successful.
    CN=Configuration,DC=WILD,DC=XXX,DC=XX,DC=XXX
        Default-First-Site-Name\WILDDC2 via RPC
            DSA object GUID: ec3bd941-b372-4094-a15a-7e0c218a9a9c
            Last attempt @ 2014-01-28 07:52:01 was delayed for a normal reason, result 8418 (0x20e2):
        The replication operation failed because of a schema mismatch between the servers involved.
            Last success @ 2014-01-28 06:52:01.
    CN=Schema,CN=Configuration,DC=WILD,DC=xxx,DC=xx,DC=xxx
        Default-First-Site-Name\WILDDC2 via RPC
            DSA object GUID: ec3bd941-b372-4094-a15a-7e0c218a9a9c
            Last attempt @ 2014-01-28 07:52:04 was successful.
    DC=DomainDnsZones,DC=WILD,DC=xxx,DC=xx,DC=xxx
        Default-First-Site-Name\WILDDC2 via RPC
            DSA object GUID: ec3bd941-b372-4094-a15a-7e0c218a9a9c
            Last attempt @ 2014-01-28 07:52:01 was delayed for a normal reason, result 8418 (0x20e2):
        The replication operation failed because of a schema mismatch between the servers involved.
            Last success @ 2014-01-28 06:52:01.
    DC=ForestDnsZones,DC=WILD,DC=xxx,DC=xx,DC=xxx
        Default-First-Site-Name\WILDDC2 via RPC
            DSA object GUID: ec3bd941-b372-4094-a15a-7e0c218a9a9c
            Last attempt @ 2014-01-28 07:52:01 was delayed for a normal reason, result 8418 (0x20e2):
        The replication operation failed because of a schema mismatch between the servers involved.
            Last success @ 2014-01-28 06:52:01.
    So, I do have a couple of replication issues.  Any idea how to resolve them?

    Long shot: did you try extending the schema using the ldifde util and the ConfigMgr_ad_schema.ldf ?
    In any case it'll give you more details and probably point you into the right direction for troubleshooting.
    Update: procedure is documented here:
    http://technet.microsoft.com/en-us/library/bb632388.aspx (2007 article but the process is identical)

  • Error when trying to extend custom idoc

    Hi ladies and gentlemen,
    I am experiencing problems when I try to extand a custom idoc segment.
    I created a custom idoc (ZBEVINBDEL) with 3 segments, generated it and have tested it successfully.  Now the users have come back and requested additional fields.  When I tried to modify the custom segment (after cancelling the segment and idoc status' from released status, I got the message 'Segment type Zxxxxx.. cannot be changed'  (this is because the idoc segment type has been flagged as generated).
    So I thought I'll create an extension to the corresponding segment.  I've created the extension segment in WE31, but when I try to create the extension (ZBEVINBDELX02), and try to create as new to the linked type ZBEVINBDEL, I get another error message 'Action is not possible for generated idoctypes'.
    Has anybody experienced this problem before, and could you give me an explanation on how to get around these problems, either for changing the segment or extending one.  If the answer lies within BDBG, please explain in detail.
    Cheers,
    Steve

    Reuben,
    In the end, I didn't need to touch the extension.  I was able to achieve my goal by adding the new fields in  my custom structure in SE11, and the new fields came into the idoc automatically.  Then I just had to add code to handle the new fields in my Function module.
    Good Luck,
    Steve

  • JRC - Error when trying to set datasource using resultsets greater than 1

    Hi
    I have one report and 2 subreports. All the reports use resultsets. At runtime the report fails when I try to set more than one result set. It works if I set one result set.
    Please advise asap
    thank you
    selvi
    FATAL - Request failed and JRC Command failed to be undone
    ERROR - JRCAgent9 detected an exception: Cannot modify a read-only collection.
         at com.crystaldecisions.reports.common.e.a.clear(Unknown Source)
         at com.crystaldecisions.reports.common.e.e.clear(Unknown Source)
         at com.crystaldecisions.reports.queryengine.ax.for(Unknown Source)
         at com.crystaldecisions.reports.queryengine.at.if(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.bj.new(Unknown Source)
         at com.crystaldecisions.reports.common.as.a(Unknown Source)
         at com.crystaldecisions.reports.common.ae.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.w.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.w.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.g.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
         at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
    Edited by: Jason Everly on Aug 15, 2008 10:06 AM
    Title was being interpretted by forums and resulted in unusable title

    I was running into this same problem and found what is either a workaround or a solution. I have a XIr2 report that I defined to use a single Java Beans Connectivity connection, and 2 resultsets from this connection as the datasources ( i.e. MyReportDatasource.getResultSet1() and MyReportDatasource.getResultSet2() ). When I tried running my app, which was using JRC to populate the report datasources, I would get that 'Cannot modify a read-only collection' exception when I called getDatabaseController().setDataSource() on the second resultset.
    To get past the error, I had to redefine the second resultset in the report as coming from a different JBC connection, so the end result was the report using 2 resultsets that come from 2 different JBC connections ( i.e. MyReportDataSource.getResultSet() and MySecondReportDataSource.getResultSet() ). When I did this, the report ran successfully. It looks like JRC doesn't like it when you to use multiple resultsets from the same JBC connection.

  • Error when trying to email report using Analyzer for Excel template

    I have a report for which I have created both "RTF" and "Analyzer for Excel" based templates. I can email the report using the RTF template, but when I try to email it using the A4E template (using the 'Send' button from the report screen), it never arrives. If I schedule the report to be emailed, it fails, and I get the following error information:
    oracle.apps.xdo.servlet.scheduler.ProcessingException: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
         at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:959)
         at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:404)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    Caused by: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
    Ideas?

    HI,
    Is this qury is running fine in SQL?? Have you checked this query in Sql server(Management studio) whether working or not??.
    I feel there is some mismatch with relations in query.. Cross check your query once in SQL itself. once it is running well, we will take a look.
    Regards,
    Salah.

  • Error when trying to activate Internal Use Rights (IUR)

    I am a Microsoft Silver partner. I am trying to activate my Azure Internal Use Rights (IUR). I am getting an error during the activation process. The error message is:
    "MS-AZR-0025P IS NOT AVAILABLE"
    I have taken screen shots of each step in the IUR activation process using Problem Steps Recorder.  I can send them to you upon request.
    I have opened support cases with Microsoft Partner Support and Microsoft Azure Billing Support.  They suggested that I post my question here for a resolution.

    Hi,
    The Billing team should have assisted you with this issue since it requires access to your Account details.
    However try the following steps if you havent tried these yet.
    1) Open the Following link in an InPrivate Window (Internet Explorer press Ctrl+Shif+P) and check if you are still getting error.
      https://account.windowsazure.com/signup?offer=MS-AZR-0025P
      If that does not work, Try this.
      http://azure.microsoft.com/en-us/offers/ms-azr-0027p/
    2) Try using a different WLID (LiveID/Microsoft Account) to activate the offer if you already have a MPN offer on the same WLID.
    3) The error may also be gerenated if the Silver Pack benefits is not being entitled to you. Call the Number 1-800-765-7768 to make sure that you are entitled to receive the silver pack benefits. you can alternatively to the website below to attempt to purchase
    again.
    https://mspartner.microsoft.com/en/us/pages/solutions/premium/windows-azure-cloud-partner-benefits.aspx
    Let us know if this helps.
    Regards,
    Nithin Rathnakar

Maybe you are looking for