Error when trying to format my 22GB SSD

The SSD originally came partitioned into two volumes. One of them was about 8GB and I have no idea what it was originally used for. The other partition was about 14GB and was used by ExpressCache.
After formatting the primary partition on the other drive and reinstalling Windows 8.1, I decided to delete the two partitions on the SSD and to instead create a single 22GB partition to be used by ExpressCache.
ExpressCache was working perfectly until I enabled bitlocker.
Then the machine started playing up and I later learned that bitlocker was incompatible with ExpressCache. So rolled back the encryption on the main drive and uninstalled ExpressCache. Since I am not going to be able to use ExpressCache with bitlocker, I would now like to format the 22GB SSD with NTFS and assign it a drive letter.
This is where I have started running into problems.
Even though I do not have ExpressCache installed or running and I do not yet have bitlocker enabled, windows keeps failing when I try to format the drive.
I have tried to use a variety of tools to format the drive. All of them get stuck at 0%.
Tools I have tried include: diskpart, windows format, EaseUS partition manager and MiniTool Partition Wizard
Various tools I have tried report that the disk is healthy.
I have used diskpart to remove the partition and create a new primary one.
When I try to format the partition using diskpart, I get the message:
"DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information."
The event log reports the following warning as a result of attempting to format the drive:
Event ID: 129
Source: storahci
Message: Reset to device, \Device\RaidPort0, was issued.
Event ID: 153
Source: disk
Message: The IO operation at logical block address d8 for Disk 1 (PDO name: \Device\00000036) was retried.
Event ID: 129
Source: storahci
Message: Reset to device, \Device\RaidPort0, was issued.
(This last warning will appear four times - roughly 30 seconds apart)
Is this a driver issue?
I have tried installing the "Intel Rapid Storage Technology Driver" and then formatting the drive, but it still gets stuck at 0% (this time however it doesn't report any warning in the event log) so I have resorted back to the Standard SATA AHCI Controller
Does anybody have any suggestions for how I can get some use out of my 22GB SSD?
It is a Toshiba THNSNX024GMNT
Much appreciated!
Solved!
Go to Solution.

Check this forum out: http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X240-SSD-Cache-M-2/td-p/1361827/page/2
I had a co-worker subscribed to the feed and had someone actually locate the SSD drive...We took it off and we are starting to image as normal now....HAPPINESS once again!

Similar Messages

Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
32 GB RAM
ATI Radeon HD 5770
OS X 10.7.5 Lion
I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
Best regards.
1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
3. I have purchased a third WD Caviar Black 2 TB HDD.
4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
6. On starting the system, it will report to initialize the new drive.
7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Format Failed error when trying to format a WD MyBook 1TB external

I have tried twice to format the drive with the same "Format Failed" error message. I know it was still formatting with 28 minutes remaining (of the 7 hour format job) the first time - the second time it ran over night. Both times, I formatted with Mac OS Extended (journaled), and selected to zero out the data.
The only difference between the two attempts was a message reporting the Mac lost connection with the drive (after the first attempt) - didn't see any such message this morning after the second attempt.
I set a couple partitions, and ran "Disk Verify".
"DIsk Verify" lists the things it has checked, and gives the following messages:
The volume Startup Backup appears to be OK.
The volume Time Machine appears to be OK.
Other than the "Format Failed" error message, the disk appears to be ok. The "Startup Backup" volume is 319.87 GB as I set, and the "Time Machine" volume is 611.64 GB
I am able to copy a file to both volumes.
So, is the "Format Failed" error message real, and the "Disk Verify" fails to see a problem because it is checking things like the Catalog file, and not each spot on the drive?
Are there any disk utilities that can test the whole drive?

As I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1

Hi, I have a mid 2010 13" MacBook Pro and I keep getting a POSIX error when trying to format my new harddrive. Help?

Hi guys, one day I turned my MacBook Pro on and it was frozen at the login screen, so I did a hard shutdown and restarted it just to get a blank white screen that didn't change. So I took it to the apple store for a genius appointment and they diagnosed the problem as a failed hard drive. So I got a new hard drive and bought snow leopard installation disc since I didn't have my original installation anymore and installed the new harddrive. I go to disc utility to erase it and create a new partition on it so the Mac will recognize it as a viable option to install snow leopard on, and I get a POSIX error that says: "the operation could not be completed. Cannot allocate memory."
So I call Apple and I'm told that it could very possible be the hard drive cable which is failing me here and not allowing the connection to the HDD. So I ordered the appropriate one on Amazon for my make and model (can be found here: http://www.amazon.com/gp/aw/d/B004VSZCL4/ref=ya_aw_oh_pit)
A lot of the reviews say a new one of these cables fixed their problems with the POSIX error, so I'm wondering what you guys think of this? And if you have any other ideas that could help out?
Any advice would be appreciated.
Thanks,
Zach

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Unrecognized database format error when trying to access addin to Acrobat reader?

I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document? What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
Thanks,
Dan

Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
Add-ins can only use features supported by Reader.
You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

Got an error when installing SocialMiner "An error occurred when trying to format sda6"

Hi,
I got an error "an error occurred when trying to format sda6", when trying to install SocialMiner 8.5.1 on VMWare. Then it stopped installing with blank screen.
Could anyone please let me know what is this error and what could be the resolution for this.
Thanks in advance.
Regards,
Sudheer

Bjornno11 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error.

Unable to load media error when trying to play a video in Sharepoint 2013

My team consistently gets an error when trying to play a video in SharePoint 2013. I can upload it, pick a thumbnail and save it. When anyone else goes to the intranet site and tries to play the video, they get a media failed to load error.
I have tried mp4 and wmv formats. I at first thought it had to do with the codec used in Camtasia to create the video, so I encoded it in Microsoft Encoder to a wmv and it still fails. All of the videos I upload fail for other users. If someone else uploads
a video, I get the error and cannot play the video. If I look at the library in Explorer, the video file is missing but the subdirectories for additional content and thumbnails are present. For the videos I upload and can play but everyone else
gets the error, I see those subdirectories as well as the video file itself.

Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
Comments
Custom
963
404
HTTP
team.hagerman.com
/submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv
13
private,max-age=0; Expires: Tue, 11 Feb 2014 21:58:26 GMT
iexplore:15076
[#956]
Request:
GET /submissions/Compiled%20Videos/AutoCAD%20-%20Multiple%20Profile%20Icons/AutoCAD%20-%20Multiple%20Profile%20Icons.wmv HTTP/1.1
Accept: */*
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E; Zune 4.7; AskTbAD2/5.15.4.23821)
Host: team.hagerman.com
If-Modified-Since: Wed, 26 Feb 2014 19:07:33 GMT
If-None-Match: "{8A07B719-341D-4BEE-BD61-F364394C3E98},2"
DNT: 1
Connection: Keep-Alive
Cookie: databaseBtnText=0; databaseBtnDesc=0; stsSyncAppName=Outlook; stsSyncIconPath=%2F%5Flayouts%2F15%2Fimages%2Fmenuoutl%2Egif; __utma=95027589.2092965952.1364844931.1393356332.1393429315.524; __utmz=95027589.1393268194.522.68.utmcsr=SilverpopMailing|utmccn=TE%20-%20St.%20Louis%20MCAD%20(12)|utmcmd=email;
__qca=P0-1092250856-1367500502168; km_ni=joyvoltenburg; km_uq=; km_lv=x; km_ai=joyvoltenburg; grvinsights=3a306cce826491ec77d9a195a63f57f2; __avc_32508=045-8a-724d-ee8f13e900daac4; Persistent_id_HgixPXFYDDdj0w=0C78ABCB2F34:1392388341; optimizelySegments=%7B%22178845731%22%3A%22false%22%2C%22178855892%22%3A%22ie%22%2C%22179190226%22%3A%22direct%22%7D;
optimizelyEndUserId=oeu1379624626946r0.0872463653920379; optimizelyBuckets=%7B%7D; __utmc=95027589; StorefrontCookie=cmen-US=en-US&bm=US; WSS_FullScreenMode=false; Ribbon.Read=1920886|-1|0|-687423497; Ribbon.DocLibListForm.Edit=682788|-1|0|1882364446;
Ribbon.Library=1920886|-1|710|-687423497; Ribbon.Permission=1920886|-1|1725|1598418443; Ribbon.ListForm.Display=1920886|-1|1620|-1006461573; previousLoggedInAs=; loginAsDifferentAttemptCount=
Authorization: Negotiate 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
Response:
HTTP/1.1 404 NOT FOUND
Cache-Control: private,max-age=0
Content-Length: 13
Expires: Tue, 11 Feb 2014 21:58:26 GMT
Server: Microsoft-IIS/7.5
X-SharePointHealthScore: 0
Public-Extension: http://schemas.microsoft.com/repl-2
SPRequestGuid: 1826789c-0589-80e7-31cd-3c1038ea29f6
request-id: 1826789c-0589-80e7-31cd-3c1038ea29f6
X-FRAME-OPTIONS: SAMEORIGIN
SPRequestDuration: 1132
SPIisLatency: 1
WWW-Authenticate: Negotiate oYGyMIGvoAMKAQChCwYJKoZIgvcSAQICooGaBIGXYIGUBgkqhkiG9xIBAgICAG+BhDCBgaADAgEFoQMCAQ+idTBzoAMCAReibARqhLWFbGbcecrn5kQ/ScMjrsqhag2XcrWQQ7g0Mb6ilZ+kFIPC6XJsH7+ldzTk3eQF/4C1f2nzJxENlP2M+75fOiRZGU/r0nvjgX5MdswmrBQkRg8iqKwcwJeE/3/P7nLWVitRs21hnB19oQ==
Persistent-Auth: false
X-Powered-By: ASP.NET
MicrosoftSharePointTeamServices: 15.0.0.4420
X-Content-Type-Options: nosniff
X-MS-InvokeApp: 1; RequireReadOnly
Date: Wed, 26 Feb 2014 21:58:25 GMT

On Windows Platform, encounters error when trying to open an Indesign document created from MAC

Hi all,
On Windows Platform, encounters error when trying to open an Indesign document in INDD format created from Mac. Error received "Either the file does not exist, you do not have permission, or the file may be in use by other application". I am currently using Adobe Indesign CC 9.2 Trial version.
Kindly advise how can i open this document on windows platform and allows me to edit the document.
Thanks!
With Rgds,
Fiona Choy

Normally there is no problem to open any INDD opening on Windows, when created on the Mac.
But Mac user are often not aware on the naming limitations. A file name must not contain /, \, |, :
It should not contain any extended character, it is not a primary problem but will be, if something links to that file, so avoid also: ÄÖÜäöüß+&
You can use all other non A-Z a-z, 0-9 and - and _
I personally would also recommend to avoid spaces.
This is valid for the INDD file itself but also for all linked content.

Error when trying to access a form through https

Hi,
I'm facing this error when trying to access a form through https, i'm using OAS10g 10.1.2.3 over linux, it has webutil configured and is working perfectly with https
I'm accessing the form through webcache.
the error:
Java Plug-in 1.6.0_37
Usar versión JRE 1.6.0_37-b06 Java HotSpot(TM) Client VM
Directorio local del usuario = C:\Users\Carlos
c:   borrar ventana de consola
f:   finalizar objetos en la cola de finalización
g:   liberación de recursos
h:   presentar este mensaje de ayuda
l:   volcar lista del cargador de clases
m:   imprimir sintaxis de memoria
o:   activar registro
q:   ocultar consola
r:   recargar configuración de norma
s:   volcar propiedades del sistema y de despliegue
t:   volcar lista de subprocesos
v:   volcar pila de subprocesos
x:   borrar antememoria del cargador de clases
0-5: establecer nivel de rastreo en <n>
cargar: clase oracle.forms.webutil.common.RegisterWebUtil no encontrada.
java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.webutil.common.RegisterWebUtil
cargar: clase oracle.forms.engine.Main no encontrada.
java.lang.ClassNotFoundException: oracle.forms.engine.Main
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Excepción: java.lang.ClassNotFoundException: oracle.forms.engine.Mainwhat could be the reason it can not find the webutil libraries with https ?? i tried erasing the java's cache but still the same error :(
Regards
Carlos

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?

I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...". Never did burn the DVD. Any ideas?
Thanks, Scott

Hi
This Q is close to - Something is wrong. What's it ?
You have to supply much more info to be able to start guessing.
• What material was used ? Video codec, Audio file format and Photo file format
• Free space on Start-Up hard disk. How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Burn speed set down or not ?
• Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
And all extra info You can supply - that set's us on track.
Yours wanting to be of help. Bengt W

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

Error When trying to load master data 0material

Hi,
I got the following error when trying to laod 0MATERIAL master data
"value '000000000004343434 ' for characteristic 0MATERIAL is in external format "
"0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
Can anybody help me in resolving this issue.
Regards

Hi,
Run transaction OMSL.
Create an entry for MATCONV in the overview screen.
Double click on this line and set the length parameter for MATCONV.
the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
Hope this helps
Provide points if it does.
Regards
Lalan

I keep getting a 4000 error when trying to burn discs....only been since the update....Help

Ever since the Itunes update, I keep getting an 4000 error when trying to burn my music to disc. How do I fix this?

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

Gettign this error when trying to access webpage using JRE V 1.4.2_06

Gettign this error when trying to access webpage using JRE V 1.4.2_06
Any suggestions?
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
java.io.IOException
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
at sun.plugin.cache.FileCache.get(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
... 21 more
load: class com.adp.e.hrclient.Client.class not found.
java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)

I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
Metalink's note: 787739.1
:)

Error when trying to format my 22GB SSD

Similar Messages

Maybe you are looking for