Error when trying to import and burn

I get the following message when I try to start up iTunes:
Warning!
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I have reinstalled iTunes three times, restarted my computer and I still get the same error. the only other media related software on my computer are Windows Media Player, Media Center, and Winamp, which has an iPod plug-in. my computer just recently crashed and I lost all of my music. I used the iPod plug-in from Winamp to upload music from my iPod to the hard drive. could this be what is affecting iTunes from working correctly?
I've tried putting a CD in the computer and importing songs but the speed goes incredibly slow (0.6 at the fastest). normally, I get a much higher speed (25-30). help!

never mind, figured it out. it was the Winamp plug-in. got rid of it and reinstalled iTunes and it works fine.

Similar Messages

ORA-01552 Error when trying to import data

I get the following error when trying to import data into my database. My version is as follows:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
and I get the following error:
ORA-01552: cannot use system rollback segment for non-system tablespace
Any help would be appreciated.
Also when I upgraded my database I received the following error message but continued without fixing:
Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
Can I fix this via an sql statement or what?

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

It generates an error when trying to import a version apex 4.0 production.

It generates an error when trying to import a version 4 application to production. The copy was made as an apex 4 EA 2, (I have backups of different times in July). The error:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 4, column 1: PLS-00306: wrong number or types of arguments in call to 'CREATE_PAGE_ITEM' ORA-06550: line 4, column 1: PL/SQL: Statement ignored <pre>declare h varchar2(32767) := null; begin wwv_flow_api.create_page_item( p_id=&gt;298101103038895115 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_flow_step_id=&gt; 45, p_name=&gt;'P45_PRODUCTBACKLOG'

This is the response that sends the team apex.
Production is very different than our EA versions. On our EA site, we explicitly stated that an export from there may not work against 4.0. From your error, it looks as if the create_page_item procedure changed between EA2 and production. The only recommendation is to take an export from production and compare the statements used for create_page_item. If you can update your EA export to match the new format, you might be able to import but again, that action is unsupported.
-- APEX Support Team

Cloudroom error when trying to import a video that causes Premiere to crash

I'm getting this cloudroom error when trying to import a video that causes Premiere to crash

Hi K Hayes,
Kyle Hayes wrote:
I'm getting this cloudroom error when trying to import a video that causes Premiere to crash...
It is difficult to see the entire message of the warning dialog box, but I suspect it is the following: c:\cloudroom\releases\2014.09\shared\adobe\mediacore\mediafoundation\api\inc\Keyframe/Key frame.h-146
If so, see this post by one of our engineers: Re: Premiere pro cc 2014.2 crashes when opening a project
Removing any imported or third party presets might help the issue.
I'm really sorry for this issue. We are currently investigating the cause.
Thanks,
Kevin

I get an error when trying to import MP3 files in iTunes?

When I try to import mp3 files into iTunes (version 6), I get an error message of:
The file "song file name" can not be imported An unknown error has occurred (-50).
I have already imported these files into iTnes on my old computer, but run into this problem with my new laptop. I downloaded a new version of iTunes just like I installed all my new programs on this new laptop.
For some reason, I run into this problem when trying to import any mp3 files (as mentioned, even mp3 files that I successfully imported into iTunes previously).
(I've tried a complete removal and re-install, but that didn't help)
Anyone know why I'm getting this error message and how to correct things?
Thanks in advance for any help !!!

C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\iTunes.exe.mdmp
C:\DOCUME~1\Mark\LOCALS~1\Temp\WERe357.dir00\appcompat.txt
those are the files that are sent as an error report... i dont know what the problem is! this is starting to get me mad! I need my music! some1 help plz.
I cant load that one folder, what could be the problem? I've loaded another folder similar to this one but it was alot smaller and everything worked out fine, but for my big one its messing up.

Run time error when trying to import bookmarks from firefox

When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.

In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
* The first (gear) button is the Organize button with basic edit menu items for bookmarks
* The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
* The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
Hover each button to see the tooltip or click each of them to see what they do.
* https://support.mozilla.org/kb/how-do-i-use-bookmarks

Error when trying to Import a CD

I am getting the following error: unknown error (-48) when trying to import CD's on my new ITunes account. Help would be greatly appreciated.

Nevermind, I just downloaded iTunes 7.0.1 or whatever that just came out, and it's all good now.

Internal unkown error when trying to import a web service

Hi!!!
I need help to achive the possiblity to select methods from a web service, I get following errors:
NET Web Service Proxy Tool Report for Web Service:
Monday, May 14, 2007 10:53:44 AM
Web Service URL: http://10.110.30.228/automation/v1.wsdl
The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
Internal Unknown Error.
Please contact National Instruments for help.
C:\Program Files\National Instruments\LabVIEW 8.2\user.lib\WebService\chassie\.dll
In addition, when opning Labview software I get a message that I do not have permission to read dll file located in directory of webservice.
Hope for quick response.
Best regards A

Hi!!
I did make a try with http post (see attachment) with the aim to send a soap xml in the http post.
I do get an error when trying to parse the soap message (see message below).
Do you have suggestions for improvement of this VI???
All advice will be appresiated.
A
#####################################################################################################3
HTTP/1.0 200 OK
Date: Tue, 15 May 2007 13:24:20 GMT
Server: Boa/0.94.13
Connection: close
Content-type: text/xml
Cache-Control: no-store
Expires: -1
<?xml version="1.0"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Body>
    <env:Fault>
      <env:Code>
        <env:Value>envender</env:Value>
      </env:Code>
      <env:Reason>
        <env:Text xml:lang="en">Failed to parse SOAP message</env:Text>
      </env:Reason>
    </env:Fault>
</env:Body>
</env:Envelope>#########################################################################
Attachments:
Soap_post html.vi ‏31 KB

Iphoto gives me an error when trying to import videos

when trying to import a video into iphoto '11 - it gives me an error "cannot import selected photo as there was a problem downloading an image"

What's the source of the video? What format is it?

-251723760 CIP Error when trying to read and array of sgl from and AB ControlLogix PLC

I have the NI Ethernet/IP module to communicate with an Allen-Bradley ControlLogix PLC. I am doing both reading (only 13 values) and writing (over 200 values). I am using the basic ethernetip tag write.vi to do the writing. These program are in an executable running on a 'run-time' machine. I have the list of tagnames I am reading and writing to and have confirmed with the person who created the AB load that the array I am writing to on the AB side has more than enough addresses (it is an array of length 300). However I am only able to write 118 values to it. When trying to write 119 or more I get the error:
-251723760 CIP error - extended status may be available
I have confirmed with NI OPC Servers with an OPC quick client (running on my development PC) connected to the AB ControlLogix that the values I am writing to up to element 118 are getting through correctly, i.e. if I write 123.456 to sample_array[13] then I in fact see this same value at that location in the OPC quick client.
To be honest I am a little disappointed that the error message is so cryptic and gives no hints as to what troubleshooting paths are possible. I have tried various combinations of group/tag names with and w/o offsets, e.g. [3], but nothing has led me any further.

Thanks for the quick response - here are screenshots of before (write OK - writing 118 values - all except last are 0) and after (error - when trying to write an array of length 119) as well as the simple test program I as using.
Attachments:
NI Ethernet_IP 3-20-2013 Troubleshooting.zip ‏90 KB

I keep getting the error: "lightroom could not import this catalog because of an unknown error" when trying to import from a catalog?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
I then tried exporting the needed photos to a new Catalog and that worked. But then when I try to import them again from my Master *+ Catalog I get the same error again!!
I also tried creating a new Master *+ Catalog and tried to import the Catalogs of each year into it and the same error happened again!!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

This is a duplicate thread - see here

How to solve the error: "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John

Workspace - Error when trying to import Financial Reports

I am trying to import some Financial Reports, but when I goto Navigate>Explore, then I right click on the folder where I want the reports and then click Imort>Financial Reports, I get this error message;
"Your Financial Reporting Web Server is unable to locat the report server epm.southbay.local:8299. Please contact your administrator. (5514)"
Also, when trying to log into Financial Reporting Studio I use the server name and port 8200, but its gives me an error message of;
"You are not authorized to use this functionality. Contact your administrator"
I have check the provisioning and I have all provisions assigned to me.
How can I log into the Financial Reporting Studio and import financial reports in Workspace?
Mike

problem solved.
Solution:
1) Right click on certresponse.crt
2) Rename to certresponse.p7r3) Right Click on certresponse.p7r -> Open
4) Select the file with your domain name
5) Right Click -> All Tasks -> Export
6) Then import this in to the J2EE Key Store

AMIE:javac error when trying to import devices from Zenworks

Hi.
Service Dek 6.5, Zenworks 11.1. I'm trying to import device information from zenworks into Service Desk using AMIE. I can connect to the Zenworks database fine in the, but when I click import I get an administrator alert: "javac is not available. Make sure you are using the JDK"
This is reported as an informational alert rather than an error. Synchronisation in progress is reported, but when it completes nothing appears to have been imported.
I've tried ZENworks Configuration Management v11.1 (LiveTime Software Inc.) Import and ZENworks Configuration Management v11.1 - Hardware (LiveTime Software Inc.) import.
Can anyone advise please?
Many Thanks
Osh..

Am 20.12.2011 14:06, schrieb Sector osh:
>
> Hi.
>
> Service Dek 6.5, Zenworks 11.1. I'm trying to import device information
> from zenworks into Service Desk using AMIE. I can connect to the
> Zenworks database fine in the, but when I click import I get an
> administrator alert: "javac is not available. Make sure you are using
> the JDK"
>
> This is reported as an informational alert rather than an error.
> Synchronisation in progress is reported, but when it completes nothing
> appears to have been imported.
>
> I've tried ZENworks Configuration Management v11.1 (LiveTime Software
> Inc.) Import and ZENworks Configuration Management v11.1 - Hardware
> (LiveTime Software Inc.) import.
>
>
> Can anyone advise please?
>
> Many Thanks
>
> Osh..
>
>
You have to install the JDK without JRE!
(You have to deselect JRE during JDK installation, else the
NSD-installer takes the JRE-path and not the JDK-path.)
HTH
Hans-Dieter

Download error when trying to download and save on Adobe XI

Since Jan. 26th I have tried to download PDF files and save them and keep getting download error. I have removed and reinstalled Adobe XI several times still having "error" when downloading or saving. This has happened with previous Adobe.

Basically, a business that I work with sent me an email. I opened the email and it stated, "To open the artist names click here". I clicked and the adobe xi came up with that message. The reason that I know that it is in an excel form is because before I got Windows 7 in December, I had xp. When I had XP I just clicked it and the artist name list would come up in excel with no problem. I have Adobe Flashplayer 16 Active x and Adobe Reader XI 11.0 .10. So as far as what programs..unable to answer that. I typically in other cases am able to open pdf files. I had problem opening one other file when I did it was also an excel file.

Error when trying to import and burn

Similar Messages

Maybe you are looking for