Error when trying to log into RSP Agent Console

Hi all,
When I try to log into RSP Agent Console, i get an error message that reads:
"An Error has occurred.  Check the log file for details"
Where can I find this log file?
Could this be related to the SQL version?  (SQL Server 2008 R2 Express)
Any other ideas of what may cause this error?
Regards,
Rikard Korff

Hi Rikard Korff,
You may check:
RSP
RSP login
Connect to Agent server in RSP
Thanks,
Gordon

Similar Messages

  • IPad mini Network connection error when trying to log into Message

    I have an iPad mini and when I try to log into message it comes up with an error asking me to check the network connection. The iPad is connected to WiFi and the internet works fine, I have tried everything I have seen to test but am not having any success. Help please...

    Hi there L1975,
    Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that can help you resolve the issue signing in to iMessage on your iPad mini.
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    So long,
    -Jason

  • 500 Error when trying to log into app

    We are working on upgrading to WLS 9.1 from WLS 8.1 sp5. We have successfully built and deployed our ear file and our portal.war file using the 9.1 and java 1.5. However, I get the following error when trying to access the login page.
    Error 500--Internal Server Error
    javax.faces.FacesException
         at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:356)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:107)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    Caused by: java.io.IOException
         at weblogic.servlet.jsp.BodyContentImpl.flush(BodyContentImpl.java:72)
         at javax.faces.webapp._PageContextOutWriter.flush(_PageContextOutWriter.java:45)
         at org.apache.myfaces.renderkit.html.HtmlResponseWriterImpl.endDocument(HtmlResponseWriterImpl.java:181)
         at org.apache.myfaces.taglib.core.ViewTag.doEndTag(ViewTag.java:110)
         at jsp_servlet.__login._jspService(__login.java:620)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:496)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
         at org.apache.myfaces.context.servlet.ServletExternalContextImpl.dispatch(ServletExternalContextImpl.java:415)
         at org.apache.myfaces.application.jsp.JspViewHandlerImpl.renderView(JspViewHandlerImpl.java:234)
         at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:352)
         ... 13 more
    Any ideas as to what could be causing this? This is currently being built and deployed on my local machine.
    Thanks.

    bftanner or any other WL 8.1 -> 9.x migration veterans,
    I'm experiencing the same error as below. Can anyone recommend a fix?
    Thanks!
    -Chip
    - Can't insert page '/common/appHeader.jsp' : null
    java.io.IOException
    at weblogic.servlet.jsp.BodyContentImpl.flush(BodyContentImpl.java:72)
    at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag(InsertTag.java:889)
    at org.apache.struts.taglib.tiles.InsertTag.doEndTag(InsertTag.java:462)
    at jsp_servlet._layout.__appdashboardlayout._jsp__tag7(__appdashboardlayout.java:470)
    at jsp_servlet._layout.__appdashboardlayout._jsp__tag6(__appdashboardlayout.java:409)
    at jsp_servlet._layout.__appdashboardlayout._jspService(__appdashboardlayout.java:205)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:394)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.chase.gcrm.approvals.web.security.LoginFilter.doFilter(LoginFilter.java:90)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:261)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
    at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
    at org.apache.struts.tiles.TilesRequestProcessor.processTilesDefinition(TilesRequestProcessor.java:239)
    at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(TilesRequestProcessor.java:302)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.chase.gcrm.approvals.web.security.PermissionFilter.doFilter(PermissionFilter.java:133)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.chase.gcrm.approvals.web.security.LoginFilter.doFilter(LoginFilter.java:90)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    <Aug 10, 2007 4:13:19 PM CDT> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.internal.WebAppServletContext@1ce0e18 - app
    Name: 'arc_ear-3.5.0', name: 'approvals', context-path: '/approvals', version: @3.5.0] Root cause of ServletException.
    javax.servlet.jsp.JspException: Can't insert page '/common/appHeader.jsp' : null
    at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag(InsertTag.java:898)
    at org.apache.struts.taglib.tiles.InsertTag.doEndTag(InsertTag.java:462)
    at jsp_servlet._layout.__appdashboardlayout._jsp__tag7(__appdashboardlayout.java:470)
    at jsp_servlet._layout.__appdashboardlayout._jsp__tag6(__appdashboardlayout.java:409)
    at jsp_servlet._layout.__appdashboardlayout._jspService(__appdashboardlayout.java:205)
    Truncated. see log file for complete stacktrace

  • Plist parsing error when trying to log into iTunes Store

    Can't log into App Store on my iPhone 5S, when trying to access my account on my MacBook I get "plist parsing error". Pls help.

    Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
    (123891)

  • How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

    When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
    I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
    Anybody has an idea of how to resolve this?
    Thanks,
    J

    1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
    2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
    3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

  • Unknown error when trying to log into Itunes

    I just got Windows 8 and i installed Itunes on it, however when i go to log in to my account it keeps stating unknown error. and it wont allow me to log into.. however when i go on my laptop i have no issue. and it runs Windows 7, What should i do?

    Debbecjam wrote:
      What can I do
    Telling us what the error says would be a good start.

  • Error when trying to log into iTunes account.

    When I go into iTunes from my laptop to update apps that I have, it prompts me to put in my password. When I put in my password, it tells me there's an unknown error and to put it in again. When I did, it tells me that my password has be put in to many times and it's incorrect. I changed my password and it's still doing that to me. Any help on how I can get rid of that?

    Debbecjam wrote:
      What can I do
    Telling us what the error says would be a good start.

  • Still getting "Unknown Server Error" when trying to log into CC Desktop App

    Hi -- I signed up for the early access file/font sync and received my email saying "You're In..."
    When I used the link in that email to download the CC Desktop App and when I launch it, I'm still receiving the error "Unknown Server Error" Sign in is currently unavailable. We are unable to access your account. Please try again later.
    Anyone run into a similar situation or have thoughts on how to remedy this?
    Thanks in advance!
    Kristina

    Solution 2 from this help article http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html should resolve the problem.

  • Error CNDP/005 when trying to log into a SAp System

    Hello everyone,
    when trying to log into a SAP System, i get the following dump:
    Error analysis
        Short text of error message:
        Control Framework: Data stream error. Transaction terminated.
        Long text of error message:
         Diagnosis
             The data stream from the frontend could not be interprete
         System Response
         Procedure
             This error is very probably due to an error in the fronte
             software installation or an obsolete version. Inform your
             administrator.
         Procedure for System Administration
             The frontend should have at least the same version as the
             release. Install the correct frontend. If the error conti
             occur, inform SAP.
        Technical information about the message:
        Message class....... "CNDP"
        Number.............. 005
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    It occurs directly after inserting my User/Password and pressing enter.
    My SAP GUI: Version 710, Patchlevel 11
    The strange thing about that:
    Last week i didn't have this error and i didn't change anything.
    I already uninstalled, reinstalled and rebooted but it didn't work.
    I would appreciate some help.

    I upgraded to patchlevel 13, which solved the problem.

  • TS1424 i'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    I'm getting 'Error 306' when trying to log into itunes. Does anyone know how to fix this?

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT5622 When trying to log into iCloud, I get error message that this iPhone has exceeded it's limits for free apple I'd accounts

    When trying to log into iCloud, I get error message that this iPhone has exceeded it's limits for free apple I'd accounts

    Indeed you do, limit of three accounts exists for every device. You can use old icloud accounts or create account on new device and then sign in on that phone. That limit is only for creating and not for use.

  • What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?

    What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?

    If you have not already created an iCloud account elsewhere you cannot do so on  PC, and that is the error message you will get. You can create an iCloud account on a Mac or an iOS device and then you should be able to sign into it in the iCloud Control Panel in Windows.

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • Error while trying to log into dealer portal - Organisational data not main

    Error while trying to log into dealer portal - Organisational data not maintained. This is happening for a specific user.
    This information is used in the URL for the VMS dealer portal.
    <Protocol>://< Host Name>:<Port>/sap/bc/bsp/sapdii/dwb/c_vms_main.do?sap-client=<Client number>
    Does anyone have any experience of similar problem ?

    so why are you   posting this to Oracle database forum?
    I see nothing involving the database.

  • HT204408 When trying to log into face time I get the registering device does not have appropriate credentials, I have OSX 10.8.4 on my Mac Pro. I can log in using my IPAD

    When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>

    Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
    Step 1
    Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
    Step 2
    Log out of your user account and log back in.
    Step 3
    Boot in safe mode and test, then reboot as usual and test again.
    Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

Maybe you are looking for

  • 11i Receivable Application

    Hi, I am currently trying to see if there is a way of using Oracle 11i to apply cash across multiple organizations/SOBs. I know that as of 11.5.7 there was no supported way of doing this without using the Lockbox or some customer form/code. I heard t

  • No Progress Screen Indicator Volume * Brightness v570

    I have a lenovo v570 with windows 7 64-bit and am having problems with the progress bars on the screen with volume and brightness.  The hotkeys still function correctly, but the bar that used to display near the bottom of my screen has suddenly disap

  • Unable to open Adobe books

    I have 4 books purchased many many years back and the computer I initially had them on long ago died as a XP machine. I can not access any of the 4 that were purchased and Adobe Digital Editions refuses to open and Acrobat will not open indicating DR

  • Data size discrepancy

    I've been doing some compression tests for a clip destined for the web. I noticed when looking at the finished versions that the file sizes shown in the Movie Info box in QT Pro are different from those shown in the finder. For one file QT Pro shows

  • Ive bought an Airport Time Capsule. trying to get it to work with BT home hub 3

    Ive followed the advice on this forum but I still cant get the Capsule to connect to the internet. Ive set the Capsule as a bridge. Connected the ethernet cable from the Capsule to the Ethernet port on the back of the BT homehub 3. the light on the f