Error when trying to migrate project from labwindows 2010 SP1 over to VS2008

I'm sure I've been successful back with this when running CVI 8.5 and VS2003 / 2005, but I keep gettin the following error when trying to do this with my current configuration. What am I missing?
See attached image
Regards
Gavin
Attachments:
CVI-VS error.JPG ‏29 KB

Not recently, but what I would say is that CVI 2010 SP1 was installed after my VS2008 installation, so it ought to be in the right order.... When I get a moment I'll reinstall the CVI runtime and see what happens. Its not critical that I get this fixed, as the project in question is so small, and as the important parts are almost competely ANSI C, it should be really easy to reconstruct in C# anyway. I'll let you know what happens anyway

Similar Messages

Propagation error when trying to download inventory from server

Hi there,
Has anyone seen the following error when trying to download an inventory from the server.:
Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
import:
BUILD FAILED
C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
Additional Information:
The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
Total time: 14 seconds
Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
Please note changing the maintenace mode makes no difference.

Please enable Verbose Logging on the propagation servlet
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
and check the logs on the server, they might give a clue

8008 Error when trying to download movies from iTunes

I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
Thanks,

Morning pettis360,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Hope this helps,
Mario

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Run time error when trying to import bookmarks from firefox

When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.

In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
* The first (gear) button is the Organize button with basic edit menu items for bookmarks
* The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
* The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
Hover each button to see the tooltip or click each of them to see what they do.
* https://support.mozilla.org/kb/how-do-i-use-bookmarks

Error when trying to export excel from Chrom

Hi,
I get the following error message when i try to export the excel from Chrome browser. Has anyone encountered this error when trying to export from Chrome ? can you please give me the solution.
Thanks.
Error message:
To export a list, you must have a Microsoft SharePoint Foundation-compatible application

Hi,
From your description, when you export a SharePoint list to excel from chrome, you get an error.
In my SharePoint 2013, when I export a SharePoint list to excel from chrome, it works fine.
For your issue, make sure the excel client have been installed in your environment.
To narrow down the issue, I would like to confirm the following information:
To check whether the issue is related to the browser, I suggest you to do a test in other browsers, such as IE and compare the results.
What version is your office client? office 2013 or 2010? 32bit or 64 bit?
Besides, here are some similar posts, you can take a look at:
http://community.office365.com/en-us/f/172/t/160015.aspx
https://social.technet.microsoft.com/Forums/office/en-US/5ffbeb9e-6eb1-41c2-8141-edab6039bbde/to-export-a-list-you-must-have-a-microsoft-sharepoint-foundationcompatible-application?forum=sharepointadminprevious
I am looking forward to your reply back.
Best regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error when trying to truncate table from within PL/SQL

Hello.....
Does anyone know why I get an error when trying to execute the following command from within PL/SQL?
truncate table event;
The error is as follows:
ORA-06550: line 20, column 14:
PLS-00103: Encountered the symbol "TABLE" when expecting one of the following:
:= . ( @ % ;
The symbol ":= was inserted before "TABLE" to continue.

And as a DDL, it does a COMMIT just before it runs. Whether you want a COMMIT or not.
And with all the locking and serialization issues associated with a DDL.

Error when trying releas my project

SecurityError: Error #2148: SWF file file:///C:/Documents%20and%20Settings/Administrator/Desktop/Run/OnlyBook.swf cannot access local resource file:///C:/Documents%20and%20Settings/Administrator/Desktop/Run/img/15.jpg. Only local-with-filesystem and trusted local SWF files may access local resources.
How can I fix it?
I am not getting this error when running the file from flex, only when I am trying to released it.

Hi,
you don't get this error from FB because default path for FB projects is written as trust. You can check all this directories in
c:\Documents and Settings\{your_user_name}\Application Data\Macromedia\Flash Player\#Security\FlashPlayerTrust\flexbuilder.cfg
Check your flash.system.Security.sandboxType
http://www.adobe.com/livedocs/flex/201/html/wwhelp/wwhimpl/common/html/wwhelp.htm?context= LiveDocs_Book_Parts&file=05B_Security_176_04.html#123020

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

Keep getting import error when trying to import photos from my camera. "iphoto cannot import your photos because there was a problem downloading an image". Can anybody help?

Have a problem importing my photos to iphoto '11. Keep getting an error message. Tried deleting some photos from iphoto as well as my camera, but it didn't help. Can anybody tell me why this is happening?

what happens when you use Image Capture (in your applications folder) and see what happens
LN

Oracle Planning gives error when trying to open application from Workspace.

Hello,
We have version 11.2.2.0.0 of Planning installed. After the install of Essbase Studio Server we have hit some issues where Planning does not seem to be available. Despite re-deploying several times and other things, we cannot connect to the Planning server.
Planning does seem to be listening
c:\Oracle\Middleware\user_projects\domains\EPMSystem\bin>netstat -na | findstr 8300
TCP    127.0.0.1:8300         0.0.0.0:0              LISTENING
TCP    155.209.11.122:8300    0.0.0.0:0              LISTENING
TCP    [::1]:8300             [::]:0                 LISTENING
but the test URL will not resolve
http://hcb-mapp156:8300/HyperionPlanning
Error 404--Not Found
When trying to open a Planning application from Workspace we see the following errors:
Description: Invalid or could not find module configuration 'HyperionPlanning.planning'.
URI: http://localhost:19000/HyperionPlanning/conf/HspJSConfig.xml
Status: 404 - Not Found
Content: text/html; charset=UTF-8
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
Hope someone can help here.
Thanks,
Philip.

Hello,
Yes, I see this error in the logs:
<Nov 12, 2013 11:09:17 AM CET> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
at com.sun.faces.config.ConfigureListener.contextDestroyed(ConfigureListener.java:241)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
Truncated. see log file for complete stacktrace
>
<Nov 12, 2013 11:09:17 AM CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'PLANNING [Version=11.1.2.0]'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:213)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:30)
at com.hyperion.hit.tool.deploy.update.UniversalListener.contextInitialized(UniversalListener.java:80)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
Truncated. see log file for complete stacktrace
Thanks.

Getting an error when trying to download music from Family Sharing

My husband & I are signed up for family sharing. When I try to download any of the music I get this error, "This device is already associated with an Apple ID. If you download past purchases with your Apple ID, you cannot auto-download or download past purchases with a different Apple ID for 90 days."
What does this mean & how do I correct it?

Howdy mrscaskin,
Welcome to Apple Support Communities.
It sounds like you recently setup Family Sharing and are seeing an alert when trying to download a past purchase from the iTunes Store. The article linked below will explain the alert you’re seeing and provide information about using Apple IDs with multiple devices.
iTunes Store: Associating a device or computer to your Apple ID
When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. Your Apple ID can have up to 10 devices and computers (combined) associated with it, with a maximum of 5 computers at any time. Each computer must also be authorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated with your Apple ID, remove unused devices or computers, and view how many days remain before the devices or computers can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Next to each device or computer name, you will be able to see when each device or computer was associated with your Apple ID. You will also be able to track how many days remain before your associated devices or computers can be associated with a different Apple ID.
I hope this helps.
-Jason

Error when trying to extend network from airport express to airport express

I have an airport express in my house.
I am trying to connect another airport express to extend the network.
I am following the instructions but keep getting an error when it is resetting itself. I have done a hard reset on the airport express so it is in its default settings.
I see both airports in the left window of the Airport Utility Application.
I select the New Base Station and select Switch to switch the networks.
I then rename and add a password to the new airport express. (continue)
I then select "I want Airport Express to join my current network" (continue)
I then select "Extend the range of my Airport Extreme or Airport Express network" so I can extend the internet connection (Continue)
It then asks me to choose the Airport Express network I want to extend - I get a choice of my "Cameron Network" or "Apple Network xox##xo" which is my new Airport Express. I'm selecting "Cameron Network" - my current wireless internet connection. (Continue)
I am then asked to select the Apple wireless device I want to join from the list.
The only option is "Cameron Airport Express" (OK)
I then get a message "Configuring main network for a new WDS remote"
I then get an error "There was an error setting up this Apple Wireless Device for WDS. Quit AirPort Utility and try again"
I've tried 10 times.
What am I doing wrong??
Thank you in advance for your help!

It sounds like you have an older "b/g" Airport Express (AX) and you have configured the device to "join" your wireless network. When the "b/g" AX is configured this way, the ethernet port is not active.
Follow the instructions to setup a WDS arrangement with both of your AX devices. One must be configured as a WDS "main" and the other as a WDS "remote".
Apple's step by step instructions to do this are found on pages 42-44 in the Designing AirPort Networks Guide
If both of your AX devices are newer 802.11"n" devices, you can use a different type of setup. Post back to confirm if that is the case.

Error when trying to retrieve files from 1Tb Seagate hard drive

15" MacBookPro mid 2009 OS 10.8.4.
I can copy small files individually but get this error message for large files or folders. "The operation can’t be completed because the (filename) is in use".
Some of these files were saved through Time Machine and some just copied across, but it doesn't seem to make a difference.
I have tried many fixes (including Lgof etc. in terminal) but none work. I have no applications open when trying to retrieve. I have set my permissions properly, I have used Disk Utility to check permissions and repair them if necesarry. I have read and write access to the drive.
This has been going on for ages. If I can't fix it, some of my files will be irretrieveable and I will have to copy small ones individually.
Any ideas?
P.S. First time I've ever posted on an issue, so apologies if not enough information

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Error when trying to recover datafile from standby database to primary

hi friends,
getting problem with restoring datafile from backupset taken on standby database to primary database.
os: windows server 2003
db: oracle 11gR1(11.1.0.6)
i've configured standby database on two different hosts.
host1 - primary (db_uinque_name= prod)
host2 - standby (db_uniue_name= prodsby)
I've configure both database with recovery catalog. I take backup on standby database. users' datafile of primary database has been lost.i'm trying to restore from the backupsets taken on standby database.
with the help of - http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJCEFEG
on primary
c:\>rman target sys/password catalog rcat/password
rman>list backup for db_unique_name prodsby;
display the backupsets
rman>restore datafile 4;
Starting restore at 06-NOV-08
starting full resync of recovery catalog
full resync complete
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1051 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 12:12:18
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
also use to tag to restore the datafile
rman>restore datafile 4 from tag='base0_prodsby';
Starting restore at 06-NOV-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/06/2008 11:27:21
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
i'm getting above errors when try to restore the datafile.
when i issue the following command.
BACKUP AS COPY DATAFILE 4 AUXILIARY FORMAT 'C:\app\Administrator\oradata\prod\USERS01.DBF';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
please friends, try to help me to solve the problem.
Thanks,
Vihang

hi.
Its not necessary its a otherway around to recover datafile from this backupset and apply archivelogs to make datafile consistent.
yes, it ain't the right way to restore backup to primary location.
so how would i connect to standby database with primary and recovery catalog.
i need to connect to recovery catalog and primary site because i need to restore to primary location and recovery catalog contain all metadata and backupsets related information.
i also tried the following steps from oracle documentation.
Connect to the standby database as the target database:
CONNECT TARGET sys@standby
You are prompted for a password:
target database Password: password
Connect to the primary database as the auxiliary database:
CONNECT AUXILIARY sys@primary
You are prompted for a password:
target database Password: password
Back up the datafile on the standby host across the network to a location on the primary host. For example, suppose that /disk1/df2.dbf is the name of datafile 2 on the standby host. Suppose that /disk8/datafile2.dbf is the name of datafile 2 on the primary host. The following command would copy datafile 2 over the network to /disk9/df2copy.dbf:
BACKUP AS COPY DATAFILE 2 AUXILIARY FORMAT '/disk9/df2copy.dbf';
Starting backup at 06-NOV-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1068 device type=DISK
channel ORA_DISK_1: starting datafile copy
input datafile file number=00004 name=C:\APP\ADMINISTRATOR\ORADATA\prod\USERS01.
DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 11/06/2008 12:49:
15
ORA-17628: Oracle error 19505 returned by remote Oracle server
getting this error.

Error when trying to migrate project from labwindows 2010 SP1 over to VS2008

Similar Messages

Maybe you are looking for