Error when trying to place images?!

In DW when I try to align images I get this error:
"Making this change would require changing code that is
locked by a template or a translator. The change will be discarded"
What do I need to change to get this to work??

You are placing the editable regions inside of block level
objects like
Heading and Paragraph tags. Some tags are not allowed inside
of those tags,
so dw complains.
<h2>
<p align="left">
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

Adobe Illustrator and InDesign CS5 crash when trying to place images. Happens around 5+ times a day.

Hi there
This Mac is quite new and was originally a migration (using Migration Assistant) from an older Mac.
Illustrator and InDesign in CS5 were both crashing often and most of the time it's when placing an image (in either application) – it doesn't crash each time I try to place an image, but 90% of the crashes are when placing an image.
We tried lots of things, like cleaning out the fonts, clearing font caches etc. After several months of that, we decided to wipe the Mac clean and start from scratch. It has been reformatted with a clean install of the OS and only minimal additional software added. Although quite a few fonts have been reinstalled, they all validate in Font Book.
One other thing of note is that the Adobe Updater fails to complete an update and so we have had to update each application manually from the Adobe website.
I would be so grateful someone could help shed some light on what is going on. Here's an EtreCheck report. Can also provide crash reports from the Console if useful.
Thanks!
EtreCheck version: 2.0.6 (91)
Report generated 28 October 2014 13:33:49 GMT
Hardware Information: ℹ️
    iMac (21.5-inch, Late 2013) (Verified)
    iMac - model: iMac14,1
    1 2.7 GHz Intel Core i5 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    Intel Iris Pro -
        S22D300 spdisplays_1080p
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: one day 4:4:52
Disk Information: ℹ️
    APPLE HDD ST1000LM024 disk0 : (1 TB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (848.81 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    EPSON EPSON Scanner
    Apple Inc. MacBook Air SuperDrive
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [invalid?]    com.adobe.SwitchBoard.plist Support
    [running]    com.backblaze.bzserv.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [running]    com.backblaze.bzbmenu.plist Support
    [not loaded]    com.spotify.webhelper.plist Support
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    MagicPrefs 2 (48)    Application (/Users/[redacted]/.Trash/MagicPrefs 2 (48).app)
    Spotify    Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
    AdobePDFViewer: Version: 9.5.5 Support
    Default Browser: Version: 537 - SDK 10.9
    SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
3rd Party Preference Panes: ℹ️
    Backblaze Backup Support
    Flash Player Support
    Growl Support
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 999.35 GB Disk used: 150.53 GB
    Destinations:
        TimeMachine [Network]
        Total size: 599.66 GB
        Total number of backups: 52
        Oldest backup: 2014-07-03 13:25:07 +0000
        Last backup: 2014-10-28 12:28:22 +0000
        Size of backup disk: Adequate
            Backup size 599.66 GB > (Disk used 150.53 GB X 3)
Top Processes by CPU: ℹ️
         2%    WindowServer
         1%    Adobe Photoshop CS5
         0%    bzfilelist
         0%    bzbmenu
         0%    fontd
Top Processes by Memory: ℹ️
    1.31 GB    Adobe Photoshop CS5
    610 MB    Adobe InDesign CS5
    490 MB    firefox
    292 MB    Finder
    215 MB    WindowServer
Virtual Memory Information: ℹ️
    90 MB    Free RAM
    3.19 GB    Active RAM
    3.28 GB    Inactive RAM
    996 MB    Wired RAM
    10.36 GB    Page-ins
    192 MB    Page-outs

Thanks, I will do.
I posted it here because this is happening on a clean drive/clean install and I have 10 other macs (including some of the same model) all running OS X 10.9.5/Adobe CS5 and not having this problem.

Adobe Illustrator and InDesign CS5 crash when trying to place images.

Hi there
My Mac is quite new and was originally a migration (using Migration Assistant) from an older Mac.
Illustrator and InDesign in CS5 were both crashing often and most of the time it's when placing an image (in either application) – it doesn't crash each time I try to place an image, but 90% of the crashes are when placing an image.
We tried lots of things, like cleaning out the fonts, clearing font caches etc. After several months of that, we decided to wipe the Mac clean and start from scratch. It has been reformatted with a clean install of the OS and only minimal additional software added. Although quite a few fonts have been reinstalled, they all validate in Font Book. I've also done a full Memtest which passed all the test.
One other thing of note is that the Adobe Updater fails to complete an update and so we have had to update each application manually from the Adobe website.
I would be so grateful someone could help shed some light on what is going on. Here's an EtreCheck report – couldn't post it on here for some reason, but I have it on a post in Apple Community Forums, here... https://discussions.apple.com/message/26970885?ac_cid=op123456. Can also provide crash reports from the Console if useful.
Thanks in advance. Any ideas gratefully received – I've run out!
ps. I have 10 colleagues with same OS version and CS5 (some even have the exact same model of Mac). They don't have this issue.

Thanks, I will do.
I posted it here because this is happening on a clean drive/clean install and I have 10 other macs (including some of the same model) all running OS X 10.9.5/Adobe CS5 and not having this problem.

EMOD error when trying to upload images to hosting library with WIN 7

Dear Gurus,
using WIN 7 and IE8 i am facing the problem that i receive the error message: "An internal error occured. Please contact your site administrator for assistance."
I have tried multiple settings also setting trusted site: *.crmondemand.com
It works but not having WIN 7 machine.
Oracle statement is that they do not support WIN7 with Email Marketing On Demand. So no help from thereside. Do you have any suggestions for me how i could upload images to EMOD having WIN7 machine. I have already tried with IE, Firefox and Chrome. Every time the same error message.
Thanks for any hint!
Regards Juergen

IE8 isn't certified for EMOD yet....you need to use IE7 to upload the images. I haven't seen anything from Oracle about changes in the new releases.
BOB - Do you know when the next release of EMOD is? I think thats 1.5?
cheers
Alex

Automator error when trying to convert images

Hi everyone,
I'm trying to create a workflow to convert images from .psd to .jpeg and for some reason when I run the workflow I get an error on the convert images option. All it says is action failed. Anyone have any advice? This is my first time using automator and I successfully set up a workflow to resize images, so I think I get the gist.
Thanks!!

Are you using a photoshop-specific action, or the built-in "Convert to JPEG" action? It's entirely possible that the built-in action might not consider a photoshop file a graphics file. Your choices then are to see if adobe has put out some specialized actions for dealing with psd files, or to switch to applescript and script photoshop directly.

Error when trying to isert Image in BO WebI report

Hi
        I am trying to insert company logo in WebI report. I saved the image in BusinessObjects Enterprise 11.5\Images folder in C drive. Path is
C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Images
There are two images here,
                              one -BO logo   skin_bo.gif
and the other my company logo    logo.gif
This is the path i gave in BO Webi
In the report-> free cell-> custom->boimg:
skin_bo.gif
When i try to insert BO delivered logo, it is fine, the image is inserted into the report. But, when i try to insert company logo, I see blank, image is not displayed.
Please let me know what the error is and solution.
Thanks in advance

Hi,
These images are on server or client.make sure these images are on the server in mentioned path.
Thanks,
Amit

Why am I getting this error when trying to do Image Processor?

Ok I am using Bridge & Image Processor to add a water mark to multiple photos at a time with my ready made action. But for some reason I seem to be getting this error message every few pictures?
I've never had problems with other photo sets doing this before, but it was just recently that it started.
But it will successfully add the water mark to some of them via the Image Processor

Actually, my DVD multi-drives are I:\ and J:\, as my C:\ thru H:\ drives are my individual internal HDD's. Even on my laptop, my multi-drive is F:\. I always list my internals in order, and my multi-drives afterwards. In my case, it's simple layout for simple minds. I am also keen on having my internals listed at the hardware level as 0 = C:\, 1 = D:\, 2 = E:\, 3 = F:\ and so on. Once let a builder deviate from this order and it bit me big time - never again!
Now, you are possibly correct that the D:\ might be the OP's D:\ is the multi-drive, and now some source disc is not in it. To keep this sort of thing from happening, I ALWAYS Copy my Assets to an internal from my externals (usually), my NAS, and from any archive discs. Importing/Opening from a DVD/CD is often asking for trouble.
Good luck to the OP,
Hunt

Error when trying to export images from LR5 to Photoshop CC

When I try to export an image without LR adjustments (original or copy) from LR5 to Photoshop CC, I get this message: "Adobe Photoshop CC cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop CC works with this version of OS X..."
I'm running 10.8.5 on an iMac and have the latest updates of Photoshop CC and LR 5 installed.

Moving to Lightroom forum.

Error 500 - Internal server error when trying to upload images to website

I have been unsuccessful in my many attempts to upload images to the bustalk website. I keep getting an Error 500 - Internal server error message asking me to try again later but the fault is still repeated.

I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
/Indiana University/Project Sites/Oncourse Team - FAIL
/Indiana University/Project Sites/SyllabusTest - Success
/Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
/Indiana University/Project Sites/UITS Podcast Team - FAIL
/Indiana University/Project Sites/ePortfolio Playgroun - FAIL
/Indiana University/Project Sites/Testong - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
/Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
/Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

HT3546 I get an error when trying to back up on my TC. Message says - The backup disk image "/Volumes/Data/Macintosh.sparsebundle" could not be accessed (error -1).

I get an error when trying to back up on my TC. Message says - The backup disk image “/Volumes/Data/Macintosh.sparsebundle” could not be accessed (error -1).
Any suggestions

See here...
https://discussions.apple.com/message/20933934#20933934

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

Sql Server Web Edition Reporting Services errors when trying to connect to Windows Azure SQL

I am using a preconfigured image from the Azure VM Gallery to create a VM.
--> Sql Server 2012 SP1 Web running under Windows Server 2008 R2
After configuring Reporting Services I get the following error when trying to run a report that connects to my Azure SQL db.
An error has occurred during report processing. (rsProcessingAborted)
An attempt has been made to use a data extension 'SQLAZURE' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
On the VM using SSMS I can connect to the Azure SQL db. On the VM in Report Builder when I define a connection I get a similar error to the one above when I test that connection. I am using Microsoft Azure SQL as the data source type.
Interestingly in Report Builder, if I proceed past the connection definition, I can see the tables from my Azure SQL db in the dataset definition page.
One more note. If I use a different image from the Gallery (Sql Server 2012 Standard SP1 on Windows Server 2012) my report builder connection works and the reports run fine. I believe that the Azure documentation says that Sql Server Web edition
is an acceptable choice for the SSRS on VM for reporting.
Any thoughts or suggestions?
Thanks -- Tom Reilly

Hello,
A VM with SQL Server 2008 R2 or 2012 supports all Reporting Services features, including all supported data sources, customization and extensibility, and scheduled report execution and delivery.
Did you run the report in Report Manager,or preview the report in Report Builder? Which version of the Report Builder you installed in the Windows Azure VM? SQL Reporting does not support reports created from Report Builder 1.0 or 2.0. You can create reports
using Report Builder 3.0 and then upload the reports.
What's more, please also check the database source credential of the report.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

I get a assertion error when trying to up load adobe lightroom have followed the instruction on the adobe site to fix the problem

i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965

Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error when trying to place images?!

Similar Messages

Maybe you are looking for