Error when trying to post interest using FNM1 in Loan Module

Hi,
I am getting error "50   E  INTEREST EXP or ZBA CONTRA ACCT cannot be replaced' when positng the interest payment for loan in loan module. The system has posted a planned record and i see it in the cash flow however when posting the planned record it is giving the above error.
Your inputs are greatly appreciated.

check loan posting scheme here:
Spro - SAP Banking - Loans management - Functions - Accounting - Define account determination
Check posting category against debit/credit posting codes and linked GL accounts for your account symbols or post here what you have defined and I couldl see what the problem is

Similar Messages

  • Error When Trying to POST: Method not implemented in data provider class

    Hi Experts,
    I have created an Odata Service using Netweaver Gateway Service builder. I am using Advanced Rest Client to test the service. I can successfully GET my data, but I run into issues when I try and POST new data.
    When trying to POST, I used the GET method to get the x-csrf-token, and added it to my header. I also updated the body XML with the data that I would like to POST. However, after sending the POST request, I am getting a "500 Internal Service Error" with the xml message "Method '<OdataServiceName>'_CREATE_ENTITY" not implemented in data provider class".
    Any help on this would be greatly appreciated. Thanks!

    Hi Kelly,
    Can you share screenshots of the error? Maybe something wrong with payload :can you share the same also? Did you try to debug it by putting a breakpoint in the CREATE_ENTITY method in the backend? Any luck?
    Regards,
    JK

  • Gettign this error when trying to access webpage using JRE V 1.4.2_06

    Gettign this error when trying to access webpage using JRE V 1.4.2_06
    Any suggestions?
    java.io.IOException
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
    at sun.plugin.cache.FileCache.get(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
    at java.io.BufferedInputStream.fill(Unknown Source)
    at java.io.BufferedInputStream.read1(Unknown Source)
    at java.io.BufferedInputStream.read(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
    ... 21 more
    java.io.IOException
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
    at sun.plugin.cache.FileCache.get(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connectWithCache(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
    at java.io.BufferedInputStream.fill(Unknown Source)
    at java.io.BufferedInputStream.read1(Unknown Source)
    at java.io.BufferedInputStream.read(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
    at sun.plugin.cache.CachedFileLoader.download(Unknown Source)
    ... 21 more
    load: class com.adp.e.hrclient.Client.class not found.
    java.lang.ClassNotFoundException: com.adp.e.hrclient.Client.class
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadCode(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
    at java.io.BufferedInputStream.fill(Unknown Source)
    at java.io.BufferedInputStream.read1(Unknown Source)
    at java.io.BufferedInputStream.read(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
    at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
    at sun.applet.AppletClassLoader.getBytes(Unknown Source)
    at sun.applet.AppletClassLoader.access$100(Unknown Source)
    at sun.applet.AppletClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)

    I got it, i only had to check the option 'Use SSL 2.0 compatible ClientHello format' from the java's control panel advanced tab.
    Metalink's note: 787739.1
    :)

  • "Sorry, this content is not allowed" Error when trying to post a reply.

    Has anyone else seen this error lately when trying to post a reply?
    Just to be sure.. I remove all the formatting and just used simple text.. Still the error persists.
    It works for some other posts in the same forum too.!
    Eg.. I am unable to post a reply to this thread
    List the files in a folder
    But was able to do so for
    control file question
    Let me know if any of you have seen this and have a workaround/solution :)
    Thanks,
    Rajesh.

    Rajesh Chamarthi wrote:
    I dont think it is an issue with specific words trying to be spam filtered....No content I tried to post i the reply went through.
    As I put in the earlier post,just the words "test" didn't work either.
    Another post i made had the same words and it went through fine..Hahahaha </sarcasm> ... I was wondering if the issue was to do with the subject, and was jokingly thinking that if the poster had a norty word (eg. l i s t) in the subject, that maybe they'd be allowed to post, but replies wouldn't be able to.
    Imagine my surprise when I opened the post you had problems with and found it has... l i s t in the subject. Head, meet desk.
    Fail?! *{;-)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

    Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
    Holding shift key and clicking refresh does not clear window.
    What else can be done to clear the window and gain access to my documents?

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Error when trying to register DB using srvctl

    Hello -
    I am getting this error when trying to add this database:
    PRKP-1073 : Cannot create database m433ddg because a database named m433ddg already exists.
    However, I have verified the DB does not exist:
    [oracle@ctolinuxpoc02 ~]$ crs_stat
    NAME=ora.ctolinuxpoc01.ASM1.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.LISTENER_CTOLINUXPOC01.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc01.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc01
    NAME=ora.ctolinuxpoc02.ASM2.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.LISTENER_CTOLINUXPOC02.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    NAME=ora.ctolinuxpoc02.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on ctolinuxpoc02
    Any ideas are greatly appreciated!
    Thanks,
    Mike

    Hi Mike,
    I remember, you had an issue that you had a corrupted OCR once. That seems to be the case here again....
    In general, if SRVCTL complains that it cannot register a DB, since the DB with that name is already registered, this could be a sign that internally (obviously the former database does not show in the crs_stat output) Clusterware can still find fragments of the formerly registered DB. What you can try to do: run an ocrdump as root and check the output file for "m433ddg" and see whether it finds something.
    Let me know, please. Thanks,
    Markus
    Edited by: MarkusM on Apr 20, 2009 5:24 PM - Reason: typos

  • Error when posting Planned Records using FNM1 in Loan Module!!

    Hi,
    I am getting error "50 E INTEREST EXP or ZBA CONTRA ACCT cannot be replaced' when positng the interest payment for loan in loan module. The system has posted a planned record and i see it in the cash flow however when posting the planned record it is giving the above error.
    Your inputs are greatly appreciated.

    check loan posting scheme here:
    Spro - SAP Banking - Loans management - Functions - Accounting - Define account determination
    Check posting category against debit/credit posting codes and linked GL accounts for your account symbols or post here what you have defined and I couldl see what the problem is

  • AS91 - AA660 Error when trying to post transaction data

    Hi,
         I am getting error AA660 when migrating assets with transactions data.
         I am trying to post Acq Tx 331 (say £1000) along with Unplanned Depreciation Tx 640 (say -£80).
         The error implies that I have a negative NBV in all depreciation areas, even though the NBV is positive (i.e. £1000-£80).
         I can circumvent the problem by setting the Negative Val Flag in each Depreciation Area for the asset, but I have a big volume of assets and this should not be happening.
        Can anyone help?
    Regards
    Derek

    Check the following notes
    1)  Note 723399 - Invest. support deprec./reval. area: Field XNEGA copied
    2)  Note 1025126 - Correct error messages from new depreciation calculation
    thanks
    G. Lakshmipathi

  • Error when trying to post an EDI invoice

    Hi,
    We are trying to post an EDI invoice and the following error message is generated
    Document contains same order item more than once - Message no. M8321
    I do not understand why this is being generated as GR-IV has been defined and the idoc holds the delivery note numbers of teh goods receipt
    Any ideas?

    please read OSS Note 103051 - EDI: Multiple reference to same purchase order item

  • Oracle10g - getting error when tried to log in using SQL plus

    I have installed Oracle Database 10g with following settings
    A) In Select Installation Method with basic installation
    1) Global Database Name: orcl
    2) Database Password: srinu
    B) In Database Configuration Assistant shows following information
    Global Database Name: orcl
    System Identifier(SID):orcl
    c) Password management
    User Name SYS and SYSTEM shows accounts are not locked and password shows empty
    I have tried to log in using scott/tiger, SYS/srinu, SYSTEM/srinu, SYS, SYSTEM with providing no pass word
    Could you please provide me the details to connect Databse from SQL plus editor
    I have all the screen shots of the above settings
    I will appreciate any help

    Please find the commands and respective results below
    D:\Documents and Settings\Administrator>SET
    ALLUSERSPROFILE=D:\Documents and Settings\All Users
    APPDATA=D:\Documents and Settings\Administrator\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=D:\Program Files\Common Files
    COMPUTERNAME=SRINU
    ComSpec=D:\WINDOWS.0\system32\cmd.exe
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=D:
    HOMEPATH=\Documents and Settings\Administrator
    LOGONSERVER=\\SRINU
    NUMBER_OF_PROCESSORS=1
    OS=Windows_NT
    Path=D:\oracle\product\10.2.0\db_2\bin;D:\WINDOWS.0\system32;D:\WINDOWS.0;D:\WIN
    DOWS.0\System32\Wbem;D:\Program Files\Java\jdk1.5.0_19\bin;D:\Program Files\Apac
    he Software Foundation\Tomcat 6.0\bin;D:\Program Files\Java\jre1.5.0_19\lib;D:\o
    racle\product\10.2.0\db_2\BIN
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PERL5LIB=D:\oracle\product\10.2.0\db_2\perl\5.8.3\lib\MSWin32-x86;D:\oracle\prod
    uct\10.2.0\db_2\perl\5.8.3\lib;D:\oracle\product\10.2.0\db_2\perl\5.8.3\lib\MSWi
    n32-x86;D:\oracle\product\10.2.0\db_2\perl\site\5.8.3;D:\oracle\product\10.2.0\d
    b_2\perl\site\5.8.3\lib;D:\oracle\product\10.2.0\db_2\sysman\admin\scripts;
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 13 Stepping 8, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0d08
    ProgramFiles=D:\Program Files
    PROMPT=$P$G
    SESSIONNAME=Console
    SystemDrive=D:
    SystemRoot=D:\WINDOWS.0
    TEMP=D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    TMP=D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    USERDOMAIN=SRINU
    USERNAME=Administrator
    USERPROFILE=D:\Documents and Settings\Administrator
    windir=D:\WINDOWS.0
    ============================
    D:\Documents and Settings\Administrator>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAY-2010 03:08
    :55
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
    ction
    Start Date 15-MAY-2010 23:44:31
    Uptime 0 days 3 hr. 24 min. 25 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File D:\oracle\product\10.2.0\db_2\network\admin\listener.o
    ra
    Listener Log File D:\oracle\product\10.2.0\db_2\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.51)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    ========================================
    D:\Documents and Settings\Administrator>lsnrctl service
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-MAY-2010 03:10
    :10
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "orcl" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: SRINU, pid: 3740>
    (ADDRESS=(PROTOCOL=tcp)(HOST=srinu)(PORT=1092))
    Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    Thanks,
    Srinivas

  • Error when trying to extend range using an Extreme connecting to a Express

    Ok,
    My cable modem is connected just fine to my AE. I can run iTunes (which is nice!) off of it, connect to the internet off of my MBP and all. I just bought a AEBS to be able to EXTEND the range of my connection for all of my small townhome. However, when I go to through the Airport Setup Assistant to try and set it up, it keeps coming back with an error that says "Error Setting up WDS" or something like that. I've tried this multiple times. I've tried resetting both the AE and the AEBS...still doesn't work. Any clue?
    Thanks,
    Ryan

    It sounds like you have an older "b/g" Airport Express (AX) and you have configured the device to "join" your wireless network. When the "b/g" AX is configured this way, the ethernet port is not active.
    Follow the instructions to setup a WDS arrangement with both of your AX devices. One must be configured as a WDS "main" and the other as a WDS "remote".
    Apple's step by step instructions to do this are found on pages 42-44 in the Designing AirPort Networks Guide
    If both of your AX devices are newer 802.11"n" devices, you can use a different type of setup. Post back to confirm if that is the case.

  • Error when trying to run script using SDK at plugin startup

    Hi
    I am trying to run a script when my InDesign plugin is loaded. I referred to the PanelTreeView sdk sample as an example and implemented a StartupShutdown Boss
    In my implementation, in the startup() method I have the code to get the scriptManager and the scriptRunner for my javascript that I want to run. However, when my code hits the following line :
              InterfacePtr<IScriptRunner>theRunner(Utils<IScriptUtils>()->QueryScriptRunner(scriptFile) ); //scriptfile is ID script file that I want to run
              I get the error saying "Calling ScriptInfoDatabase::InitScriptInfoManager before resources have been registered".
    I am wondering how I can fix this error. or if this is too early to invoke scriptrunner, then is there some other place where I can invoke the scriptrunner to run my script
    this is how I have defined my StartupShutdown Boss class in  the .fr file
        Class
             kmyStartupShutdownBoss,
             kInvalidClass,
                 /** Implementation of IStartupShutdownService that runs a  scripts on startup */
                 IID_IAPPSTARTUPSHUTDOWN, kmyStartupShutdownImpl,
                 /** identify the service type */
                 IID_IK2SERVICEPROVIDER, kCStartupShutdownProviderImpl,
    Appreciate any help on this one .. thanks!
    Sameer

    Dependent on your InDesign version, you can schedule an IdleTask and do it from there, or just use a lazy startup.
    IID_IK2SERVICEPROVIDER,kLazyStartupShutdownProviderImpl,
    Again dependent on your InDesign version you should first check whether a script can run at all - some nasty other plugins may prevent that with modal dialogs.
    Finally there is the possibility to run startup scripts even without plugin ...
    Dirk

  • Error when trying to activate Internal Use Rights (IUR)

    I am a Microsoft Silver partner. I am trying to activate my Azure Internal Use Rights (IUR). I am getting an error during the activation process. The error message is:
    "MS-AZR-0025P IS NOT AVAILABLE"
    I have taken screen shots of each step in the IUR activation process using Problem Steps Recorder.  I can send them to you upon request.
    I have opened support cases with Microsoft Partner Support and Microsoft Azure Billing Support.  They suggested that I post my question here for a resolution.

    Hi,
    The Billing team should have assisted you with this issue since it requires access to your Account details.
    However try the following steps if you havent tried these yet.
    1) Open the Following link in an InPrivate Window (Internet Explorer press Ctrl+Shif+P) and check if you are still getting error.
      https://account.windowsazure.com/signup?offer=MS-AZR-0025P
      If that does not work, Try this.
      http://azure.microsoft.com/en-us/offers/ms-azr-0027p/
    2) Try using a different WLID (LiveID/Microsoft Account) to activate the offer if you already have a MPN offer on the same WLID.
    3) The error may also be gerenated if the Silver Pack benefits is not being entitled to you. Call the Number 1-800-765-7768 to make sure that you are entitled to receive the silver pack benefits. you can alternatively to the website below to attempt to purchase
    again.
    https://mspartner.microsoft.com/en/us/pages/solutions/premium/windows-azure-cloud-partner-benefits.aspx
    Let us know if this helps.
    Regards,
    Nithin Rathnakar

  • JRC - Error when trying to set datasource using resultsets greater than 1

    Hi
    I have one report and 2 subreports. All the reports use resultsets. At runtime the report fails when I try to set more than one result set. It works if I set one result set.
    Please advise asap
    thank you
    selvi
    FATAL - Request failed and JRC Command failed to be undone
    ERROR - JRCAgent9 detected an exception: Cannot modify a read-only collection.
         at com.crystaldecisions.reports.common.e.a.clear(Unknown Source)
         at com.crystaldecisions.reports.common.e.e.clear(Unknown Source)
         at com.crystaldecisions.reports.queryengine.ax.for(Unknown Source)
         at com.crystaldecisions.reports.queryengine.at.if(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source)
         at com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Unknown Source)
         at com.crystaldecisions.reports.dataengine.bj.new(Unknown Source)
         at com.crystaldecisions.reports.common.as.a(Unknown Source)
         at com.crystaldecisions.reports.common.ae.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.w.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.w.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.g.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
         at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(Unknown Source)
    Edited by: Jason Everly on Aug 15, 2008 10:06 AM
    Title was being interpretted by forums and resulted in unusable title

    I was running into this same problem and found what is either a workaround or a solution. I have a XIr2 report that I defined to use a single Java Beans Connectivity connection, and 2 resultsets from this connection as the datasources ( i.e. MyReportDatasource.getResultSet1() and MyReportDatasource.getResultSet2() ). When I tried running my app, which was using JRC to populate the report datasources, I would get that 'Cannot modify a read-only collection' exception when I called getDatabaseController().setDataSource() on the second resultset.
    To get past the error, I had to redefine the second resultset in the report as coming from a different JBC connection, so the end result was the report using 2 resultsets that come from 2 different JBC connections ( i.e. MyReportDataSource.getResultSet() and MySecondReportDataSource.getResultSet() ). When I did this, the report ran successfully. It looks like JRC doesn't like it when you to use multiple resultsets from the same JBC connection.

  • Error when trying to email report using Analyzer for Excel template

    I have a report for which I have created both "RTF" and "Analyzer for Excel" based templates. I can email the report using the RTF template, but when I try to email it using the A4E template (using the 'Send' button from the report screen), it never arrives. If I schedule the report to be emailed, it fails, and I get the following error information:
    oracle.apps.xdo.servlet.scheduler.ProcessingException: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
         at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:959)
         at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:404)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    Caused by: oracle.apps.xdo.servlet.data.DataException: Invalid format requested: html
    Ideas?

    HI,
    Is this qury is running fine in SQL?? Have you checked this query in Sql server(Management studio) whether working or not??.
    I feel there is some mismatch with relations in query.. Cross check your query once in SQL itself. once it is running well, we will take a look.
    Regards,
    Salah.

Maybe you are looking for