Error when trying to remove blob: There is currently a lease on the blob and no lease ID was specified in the request.

I'm having this error when I try to remove a blob that was used for a VM in the pass, the VM was already removed and there's nothing using that blob nor even the storage account wh ere the blob is stored.
There is currently a lease on the blob and no lease ID was specified in the request. RequestId:0a441667-0001-0044-7861-bc17ef000000 Time:2014-12-18T15:53:04.5315752Z
I'm trying to delete the blob from the current web interface, and I haven't found a way to specify a lease ID or check what lease could it has.
Thanks in advance

Hi jruiz,
When you delete a Virtual Machine on the Management Portal, the "Disk" resource used to mount the Virtual Machines VHD is kept.The "Disk" resource is responsible for mounting the blob for the VHD file, so it can be attached to virtual
machines as an OS Disk or Data Disk. It will continue to hold a lease on the blob for as long as it exists.
So you need to delete the "Disk" resource to break the lease on the blob.
Please refer to the link about how to delete disk resource to break lease on the blob.
http://blogs.msdn.com/b/mast/archive/2013/02/05/iaas-unable-to-delete-vhd-there-is-currently-a-lease-on-the-blob.aspx
Best Regards,
Kevin Shen.

Similar Messages

Receiving an error when trying to remove P00 Security role from the user

Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
Vineet

Hi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore

I have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

i have a system error when trying to open my itunes on my laptop. Should I unistall and reinstall itunes?

The first error comes when i open my laptop:
APSDeamon.exe - System Error
The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
when I try to open Itunes, it says:
iTunes.exe
iTunes was no installed correclty, please re-install itunes
Thanks!
Annabel

Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
Holding shift key and clicking refresh does not clear window.
What else can be done to clear the window and gain access to my documents?

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Error when trying to remove logical systems using SALE

Hello,
We are trying to remove obsolete entries from the logical system name table using transaction SALE. When doing this, for some entries, I am getting a message:
The logical system GB1MATDEV is still used in distribution model SUBSYSTEMS (client 010).
Confirm that the logical system GB1MATDEV is really no longer used. Delete it first from distribution model SUBSYSTEMS (client 010), then delete it here.
So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected.
It seems that I am stuck. Any ideas on how to resolve this?
Regards,
Michael Dube

Dear Michael
"So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected."
You need to delete the lowest possible node first, if you select the top node you get this type of error.
You need to expand the node and then delete the smallest part of the node first and work your way up until you can delete the node itself.
<removed_by_moderator>
Kind regards
Tom

Problems error when trying to remove live

I couldnt start up any of the programs including audio HQ for my soundblaster li've 5.. I decided to try and reinstall but it kept giving me this error message halfway through the removal.
0x8004020 and then it shuts down.
Now i cant remove the soundblaster and therefor cant reinstall either. Ive tried all the manual remove stuff but that was no good either.
Hope you can help.
Thanks

frankh,
Check the steps in this Knowledgebase article SID682 and see if it helps you.
JasonMessage Edited by Jason-CL on 07-7-2006 05:46 PM

Icotact gives me a memory error when trying to remove duplicates

Running the latest IOS. I launched icotact. then went in to Card menu, then look for duplicates. It took forever to find the duplicates and when it finally did I had about 8 duplicates. I then hit the merge duplicates button and the computer told me it has run out of system memory.
I have 8 gigs of ram in my system. I tried it a second time but on the second time i did a system restart same problem.   Any thoughts?

Oh, you mean Contacts? The contact management app?
I think that something is corrupted in the Contacts database which may be causing the problem you see.
Try deleting the index files which will rebuild the database.
Backup the Contacts by going to File menu and choosing Export to Contacts Archive
Close Contacts
Open Finder to this location
     ~/Library/Application Support/AddressBook
     If you triple-click the above line, you can copy it and paste into Go To Folder (cmd-shift-g) in the Finder Go Menu.
You should see three files named with address book-v22.abcddb
AddressBook-v22.abcddb
AddressBook-v22.abcddb-shm
AddressBook-v22.abcddb-wal
Delete all three of them, then open Contacts.
It will take a moment to rebuild the index, but you should see all of you cards back.
Try merging the duplicates again.
If anything goes wrong, you can restore from the backup you made by double-clicking on it in the Finder.

What causes the "Invalid annotation object." error when trying to remove headers, footers from a PDF

using Acrobat X (10) Professional?
There are no layers, attachments, signatures, or security settings on the PDF.

Dear Siva
Thank you for your reply. I did not know that. Although I often use an alias, as I was just figuring out how to do the query I didn't do this.
Is this the case with many of the GeoRaster related select statements? Does anyone know the reasons why this needs to be the case?
Kind regards
Tim

I get this error when trying to prepare a project for sharing to itunes or iDVD. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)

The project could not be prepared for publishing because an error occurred. (-50)

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

I get the following when trying to download icloud - there is a problem with this windows installer package. A program as part of the setup did ot finish as expected

My ipad will not open icloud photos and I have a windows 7 laptop so I removed icloud and and I am trying to download it again but get the following message: There is a problem with this windows installer package. A program run as part of the set up did not finish as expected. This problem occurred I think after one of the Apple updates and I couldn't find icloud photos on the icloud main page. When I tried to open icloud photos from the select menu it was there but nothing happened.

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I am getting a runtime error when trying to download itunes

I keep bgetting a runtime error when trying to download itunes

Not there aren't any special settings for this. You just use the Open In feature to save the document into Pages. You could have a font in the document that Pages doesn't like, maybe something that you copied and pasted from somewhere into the document that went corrupt. But there is nothing special about the way that you save a Word document into Pages. You save it like you save any document or file into a compatible app.

Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time.

Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time.
prev suggestion was to remove file: com.apple.PhotoBooth.plist.
still not working and I Am running;
OS X version 10.9.1

I had the same issue, as suggested by others on similar question I checked my permissions and they were fine.
This worked for me
1) First saved the photos from my current Photo Booth library
2) Deleted the photo booth library folder
3) Created a new admin user
4) Copy the photo booth library from the new user and paste it in your user (where the previous photo booth library was)
5) You can then delete the new user you created.
*this is my first attempt here, so my bad if its not up to scratch*

Error when trying to migrate project from labwindows 2010 SP1 over to VS2008

I'm sure I've been successful back with this when running CVI 8.5 and VS2003 / 2005, but I keep gettin the following error when trying to do this with my current configuration. What am I missing?
See attached image
Regards
Gavin
Attachments:
CVI-VS error.JPG ‏29 KB

Not recently, but what I would say is that CVI 2010 SP1 was installed after my VS2008 installation, so it ought to be in the right order.... When I get a moment I'll reinstall the CVI runtime and see what happens. Its not critical that I get this fixed, as the project in question is so small, and as the important parts are almost competely ANSI C, it should be really easy to reconstruct in C# anyway. I'll let you know what happens anyway

When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off but i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half anhour - can anyone help?

Hi,
When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half an hour - can anyone help?
Thanks

Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

Error When Trying to use SAP Help Function

I receive the following Error while simply clicking on Help in SAP. I put a ticket in and out IT support was by SAP the following highly intelligent and helpful info/advice This is an actual quote!!!!:
“This option is not available if they are looking for training on how to use SAP, then need to request this from SAP support or an individual that is working with SAP in their departnemtn"
I was of the opinion that software comes with the help function in most cases (I say most because I could imagine someone making it a separate module but it would not go over well at all). I
I found a folder on the corporate shared drive called SAP_Help and took the following screen shots and there was a notedpad doc that listed every chm file and what it covered.
Next I opened SAP from Windows Server 2008 Applications Portal and so after I RDP'd into the server help works...
Anyone know why this is happening I went to school and got a degree in Accounting.

It seems you are using wrong client ID. Make sure your logon pad has right details. You should verify this with your basis team.
If the problem persists then try re-installing. But before you do that you can execute sapbexc.xla which is in the c:\program files\sap\bw. Type c:\ in cell c3 and click "start button". Any red flag means you have wrong version dll/ocx on your local drive, in that case you should reinstall with right patches.
if this solution helps u then pls assign points

Error when trying to remove blob: There is currently a lease on the blob and no lease ID was specified in the request.

Similar Messages

Maybe you are looking for