Error when trying to retrieve data from Essbase

Hi There
I running OBIEE 10.1.3.4.0 and Essbase 9.3.1. When im trying to update member count for instance(from administration tool) it gives me the following errors.
nQSError 10058, nQSError 43093 and Essbase Error 1260046. This is when im testing against an Essbase I have developed for my self. If I try using one of the supplied sample databases it works fine...
Does anybody have an idea about what could be wrong?
Any pointers would be much appreciated!
Regards, Jacob

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Similar Messages

Error while trying to retrieve data from BW BEx query

The following error is coming while trying to retrieve data from BW BEx query (on ODS) when the Characters are more than 50.
In BEx report there is a limitation but is it also a limitation in Webi report.
Is there any other solution for this scenario where it is possible to retrieve more than 50 Characters?
A database error occured. The database error text is: The MDX query SELECT { [Measures].[3OD1RJNV2ZXI7XOC4CY9VXLZI], [Measures].[3P71KBWTVNGY9JTZP9FTP6RZ4], [Measures].[3OEAEUW2WTYJRE2TOD6IOFJF4] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [ZHOST_ID2].[LEVEL01].MEMBERS, [ZHOST_ID3].[LEVEL01].MEMBERS ), [ZHOST_ID1].[LEVEL01].MEMBERS ), [ZREVENDDT__0CALDAY].[LEVEL01].MEMBERS ) ........................................................ failed to execute with the error Invalid MDX command with UNSUPPORTED: > 50 CHARACT.. (WIS 10901)

Hi,
That warning / error message will be coming from the MDX interface on the BW server. It does not originate from BOBJ.
This question would be better asked to support component BW-BEX-OT-MDX
Similar discussion can be found using search: Limitation of Number of Objects used in Webi with SAP BW Universe as Source
Regards,
Henry

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error when trying to retrieve files from 1Tb Seagate hard drive

15" MacBookPro mid 2009 OS 10.8.4.
I can copy small files individually but get this error message for large files or folders. "The operation can’t be completed because the (filename) is in use".
Some of these files were saved through Time Machine and some just copied across, but it doesn't seem to make a difference.
I have tried many fixes (including Lgof etc. in terminal) but none work. I have no applications open when trying to retrieve. I have set my permissions properly, I have used Disk Utility to check permissions and repair them if necesarry. I have read and write access to the drive.
This has been going on for ages. If I can't fix it, some of my files will be irretrieveable and I will have to copy small ones individually.
Any ideas?
P.S. First time I've ever posted on an issue, so apologies if not enough information

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Error when trying to extract data from Solman to BI 7

Hi,
We are trying to extract data from Solman 7 to BI 7. The following extractors have been activated on Solman since we want to be able to report CCMS ALERTS and System availability on Bi Portal.
Transaction SPRO -> SAP Reference IMG -> SAP Solution Manager -> Scenario-Specific Settings -> Operations -> BI Reporting
transaction: RSA5 (Installation of DataSource)
0SM_SMG_ROOT Oberster Knoten Solution Manage
0SM_SMG Solution Manager
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
Our current situation is that we have scheduled the jobs through Solution_manager > solution Reporting > BI Data collection. Yet no data has been collected and the jobs are getting cancelled.
Has anyone come accross this same situation before? Plus I have just found out that on SOLMAN_WORKCENTER under System Monitoring there is a reporting step named IT PERFORMANCE reporting that needs to be configured.
Please advice since this will be critical for our busines.

Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas

Error when trying to retrieve UserName from MySAPSSO2 cookie

Hi,
I tried to retrieve the UserName from MySAPSSO2 cookie using the dotnet toolkit, but I keep getting the error "User Not Aunthenticated". I have placed the verify.pse files in a folder called psefiles in the same location as the bin folder of my application.
I then also tried to directly use Convert.FromBase64String() to read the username from the cookie, but during conversion I get the error "Invalid character in a Base- 64 string"
Any help is highly appreciated.
Thanks,
Kantishree D.

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Error when trying to delete data from 0Plant

I am trying to delete the master data from 0Plant and get the following message:
The system is unable to delete all of the specified m
because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no lo
Is there a workaround? Thanks

Hi Niten,
You can delete the Master Data which are not used still. (As the SIDs are not mapped to the DIM Tables)
Then regarding the used ones ::: If you upload the Masterdata again with modifications, it will overwrite and after the attribute chage run you will see the modified Master Data.Hope this will solve your problem
regards
Happy Tony

My iMac is running very slowly when trying to retrieve data from the internet.

Safari hangs on all web pages, take at least 15mins to download a single page. Connecting iTunes Store hangs indefinitely.
I am running OS X 10.7.5.
All other devices connected to my router have no problems accessing the web including NetFlix through Apple TV, iPad etc. I have not changed my router or service provider.
What I have tried so far:
Turned off Extensions (not that I had any to start)
Removed all Website Data
Unchecked Allow Plug-ins
Any other suggestions...?

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

TCP packet out of state: First packet isn't SYN & Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]

We are transitioning from Exchange 2003 to Exchange 2010. We found Outlook online mode (non-cached mode) have many warning "Outlook is trying to retrieve data from the Microsoft Exchange Server [CAS-ARray]", usually happen when users tried to open
address book but sometimes even normal operation like click the Send button. The problem does not affect OWA and extremely rare when Outlook is running in cached mode. Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops.
We have a lot from the CAS/HT to DC/GC on TCP_3268 and LDAP. And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK.
We also have a lot from CAS/HT to the Outlook Clients on the static RPC port (TCP_59933). And the errors are "TCP packet out of state: First packet isn't SYN" with tcp_flags FIN-ACK, PUSH-ACK and RST-ACK, ACK.
This happens even on Outlook 2010 which I though it has TCP Keep Alive implmented to keep the session active within 1 hour.
Can somebody tell me if these out-of-state are the cause of our problem? And how to fix it?
THANK 1,000,000

Hello AndyHWC,
I did some consulting with our CAS team and received the following feedback to your post:
It is difficult to determine what is causing resets without seeing the captures first hand however, the concern is that you are seeing dropped packets on the firewall logs. Where is this firewall located?
Based on the description "Check the firewall logs, we notice a lot of "TCP Packet Out of State" drops." and "We have a lot from the CAS/HT to DC/GC on TCP_3268 and
LDAP." indicates to me that the firewall is between CAS and GC. This not supported under any circumstances and would explain the issue they are seeing with clients trying to "retrieve data from the GC".
If there is not a firewall between the GC and CAS then a Microsoft support engineer would need to have concurrent Netmon Captures from client, CAS, GC during the
issue to analyze. If only one GC exists consider adding another GC to handle the client requests and for fault tolerance.
Also verify that all NIC card drivers are updated to the latest driver version
More information about firewalls with Exchange 2007/2010
http://msexchangeteam.com/archive/2009/10/21/452929.aspx
http://technet.microsoft.com/en-us/library/bb232184(EXCHG.80).aspx
You can install the Client Access server role on an Exchange 2007 computer that is running any other server roles except for the Edge Transport server role. You
cannot install the Client Access server role on a computer that is installed in a cluster. Installation of a Client Access server in a perimeter network is not supported.
http://technet.microsoft.com/en-us/library/dd577077(EXCHG.80).aspx
“The Installation of a Client Access Server in a Perimeter Network Is Not Supported
Issue You may want to install an Exchange 2007 Client Access server in a perimeter network. However, this type of installation is not supported in Exchange
2007.
Cause The Exchange 2007 Client Access server role is not supported in any configuration in which a firewall is located between the Client Access server
and a Mailbox server or a domain controller. This includes firewall devices, firewall programs, or any program or device that is designed to restrict traffic between two network locations.
For correct operation, Client Access servers require typical domain connectivity to domain controllers and global catalog servers. Because any devices
or programs that restrict or reduce access to domain controllers or global catalog servers may affect the correct operation of the Client Access server, we do not support this type of configuration.
Resolution To resolve this issue, move the Client Access servers to the internal network. For more information about the ports that Exchange 2007 uses
for various services, see Data Path Security Reference.”
Thanks,
Kevin Ca - MSFT
Kevin Ca - MSFT

ORA-01552 Error when trying to import data

I get the following error when trying to import data into my database. My version is as follows:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
and I get the following error:
ORA-01552: cannot use system rollback segment for non-system tablespace
Any help would be appreciated.
Also when I upgraded my database I received the following error message but continued without fixing:
Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
Can I fix this via an sql statement or what?

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Propagation error when trying to download inventory from server

Hi there,
Has anyone seen the following error when trying to download an inventory from the server.:
Buildfile: C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml
import:
BUILD FAILED
C:\bea10.3\user_projects\workspaces\RST\RSTPropagation\21102009\propbuild.xml:39: The propagation servlet returned a failure response: The [Download] operation is halting due to the following failure: null
Additional Information:
The propagation servlet returned the following log information found in [C:\DOCUME~1\myuser\LOCALS~1\Temp\onlineDownload__D21_H11_M8_S11.log]:
INFO (Oct 21, 2009 11:08:11 AM SAST): Verbose logging has been disabled on the server.
INFO (Oct 21, 2009 11:08:11 AM SAST): The propagation servlet is starting the [Download] operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): The modifier [allowMaintenanceModeDisabled] with a value of [true] will be used for this operation.
INFO (Oct 21, 2009 11:08:11 AM SAST): Validating that current user is in the Admin role...SUCCESS
ERROR (Oct 21, 2009 11:08:11 AM SAST): Validating that Maintenance Mode is enabled...FAILURE
ERROR (Oct 21, 2009 11:08:11 AM SAST): Maintenance Mode has not been enabled on the server. With Maintenance Mode disabled it is possible for users to modify the application. This may cause problems for propagation.
WARNING (Oct 21, 2009 11:08:11 AM SAST): Because the modifier [allowMaintenanceModeDisabled] was enabled this validation failure will be ignored and the operation will proceed. However, users will still be able to make modifications to the application, which could lead to missing data and unexpected propagation errors.
WARNING (Oct 21, 2009 11:08:11 AM SAST): The temporary directory on the server used by propagation is [portal/bea10.3/user_projects/domains/RSTDomain/servers/wl_nstf/tmp/_WL_user/RSTEar/7v9j6d/public] with a length of [99] bytes. It is recommended that you shorten this path to avoid path length related failures. See the propagation documentation on how to specify the inventoryWorkingFolder context-param for the propagation servlet.
INFO (Oct 21, 2009 11:08:19 AM SAST): Validating that LDAP and RDBMS security resources are in sync...SUCCESS
INFO (Oct 21, 2009 11:08:19 AM SAST): Writing the inventory file to the servers file system at [{0}].
ERROR (Oct 21, 2009 11:08:23 AM SAST): The [Download] operation is halting due to the following failure: null
Total time: 14 seconds
Please let me know if you have any ideas because "The [Download] operation is halting due to the following failure: null" means nothing to me.
Please note changing the maintenace mode makes no difference.

Please enable Verbose Logging on the propagation servlet
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/prodOps/propToolAdvanced.html#wp1071690
and check the logs on the server, they might give a clue

8008 Error when trying to download movies from iTunes

I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
Thanks,

Morning pettis360,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Hope this helps,
Mario

Ip adress not recognized in windows explorer when trying to transfer data from my PC to my TC via ethernet.

Hello,
I currently have a Time capsule and a Pc with a Windows 7 operating system. Im trying to transfer data from my PC to my Time Capsule via ethernet cable because wirelessly takes too much time given that I have a lot of data to transfer. In my Airport Utility I already set my workgroup to "WORKGROUP" and the file sharing to "write and read", I also disconnected the Wifi on my Pc so the ethernet would work without confusions. But when I type my Time Capsule's Ip address in my windows Explorer it opens a page that says something like "this website is not available". Maybe I did something wrong while setting up the time capsule for file sharing. What are the correct steps for me to be able to transfer data from my PC to my time capsule via ethernet cable?

I do not normally use a PC, but we have a guest here this week with a PC using Windows 7 which allows for some "testing" on the network.
What is the Ethernet connected IP address of the Time Capsule? Mine is 10.0.1.2
If we open Windows Explorer and type in
\\10.0.1.2
the Time Capsule drive is immediately seen on the PC once I enter the device password for the TC to connect.
I can also type in the name of the Time Capsule and things work the same way. My Time Capsule name is TC
\\TC
brings up the same log in as the IP address method above
We have not tried mapping the drive, but might. Will post on results if we do that.

Error when trying to retrieve data from Essbase

Similar Messages

Maybe you are looking for