Error when trying to sync new update
How annoying once again I didn't even know there was an update. Itunes downloaded the update but when it tries to sync it I get this error cannot sync ^0 to the iphone unknown error (-19) and I restarted my phone and restarted itunes. Now at the syncing part it is taking FOREVER to sync my applications I have installed. ***???
Okay, I had to remove the application Hold 'em. And now it is downloading the update into my phone. While syncing though it said there were 9 errors and said all my other apps were not installed. How dumb! Now they need another update for that problem! I don't think I have ever experienced such a pain in the but before! And my phone is one of the older ones and I paid how much for this? I've been even thinking of dumping this and trying the one with Verizon!!!
Similar Messages
-
I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.
Follow this instruction exactly to the last line. It worked on mine.
Jolly Giant wrote:
daduser wrote:
"copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so
now try consolidating again. -
HT1222 my ipod reads error when trying to sync with itunes
my ipod reads error when trying to sync to my itunes
Hello, TheHelper1964.
Thank you for the question. There could be multiple causes to the errors that you are receiving. I have included a couple articles that will help you troubleshoot this issue.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com.
Hope this helps,
Jason H. -
Get the following error when trying to sync itunes to Nano itunes could not coppy " Song" to the ipod because unknown error occurred (-5000). Any ideas?
Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2 -
I received an error when trying to sync my IPOD erorr 13019
I received an error when trying to sync my IPOD erorr # 13019
See my response to your other post.
-
HT4623 unknown error 1156 when trying to sync after updated to ios 6 - help?
I got a message on itunes - unknown error 1156 - when trying to sync after I updated to ios 6 . Anybody else had the same thing?
Hey greenleas_c,
Welcome to the forums.
For more information on the "Unknown error reported" during synchronization, see
"Unknown Error Reported" appears when synchronization settings are configured in the BlackBerry Desk...
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I am getting a -50 error when trying to sync my IPOD Classic with XP.
I am getting a -50 error message when trying to sync my IPOD Classic with ITunes. My computer is running WIndows XP.
Given that you're on XP, we'd better try the following document:
iTunes displays -50 error message when syncing iPod on Windows XP -
Portal runtime error when trying to create new Iviews in EP
Hi
Require an Urgent help
getting portal runtime error when trying to create a new iView in portal. I am unable to create a single iView in portal.
It was working before please see this error message
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Component Name : com.sap.portal.appintegrator.sap.WebDynproPageBuilder
Error occurs during the rendering of jsp component.
Exception id: 05:20_12/01/08_0004_17115850
See the details for the exception ID in the log file
AM Iworking on NW2004s sp11. I was able to create iViews on this system before
let me know where to check the log file also. Points will be awarded
Thank you
Krishna Kanth
Edited by: siddi siddi on Jan 13, 2008 12:05 AMKrishna Kanth,
logs can be read from nwa, if you hv the relevant access or get portal admin to pass the defaulttrace file to you. Login to nwa, navigate to Monitoring-Logs and traces and select (either default trace or last 24hrs) to view the logs. hope this helps
prachi -
I am getting an error when trying to download new iTunes software to new Windows 7 computer.
I am getting an error when trying to download iTunes to a new Lenovo laptop with Windows 7. Says... An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="86". HRESULT:0x80070BC9
Please help if anyone knows how to fix or bypass this problem.These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time? -
Error when trying to activate new valuation area - AU158
Hi,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 08 differ by more than 1 year" (AU158).
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
When I check the settings in transaction OAAR what I see is: area 01 - 2010 and area 08 (newest) - 2008 fiscal year is assigned.
How can I close area 08? Will I need reopen the 01 area until 2008 fiscal year?
How can I create the new area with the same fiscal year closing?
TksYear end closing--AJAB
FY Change---AJRW
If you open FY 2008, then you can create new depreciation area through AFBN.
I guess this depreciation area doesn't generate any postings and this is only for reporting purpose. -
Error when trying to activate new valuation area.
Hello forum,
I´m getting an error when trying to activate a new valuation area by using AFBN transaction. I get a message that says "Closed fiscal years for areas 01 and 10 differ by more than 1 year".
Then the system recomends me to check the settings of the depreciation areas for the closed fiscal years since the closed fiscal years of the areas are not allowed to more than 1 years apart.
But when I check the settings in transaction OAAR what I see is that same fiscal year is assigned to all the areas.
I don´t understand why the system is showing me this error then...How can I ensure all areas to be in the same fiscal year.
Thanks in advanceHi,
Do you have other company codes which are using the same Chart of Depreciation? Please check these company codes and perform fiscal year change to them.
It seems that the problem is related to note 421549 : the system tries
to check the entries for field T093B-ABGJA for all the entries,not
only for the relevant company code. If there's a difference of more
than 1 fiscal year between the last closed fiscal year for the area
you are trying to create, and one of the entries in T093B, then,
error AU 158 arises."
Because according to the note 421549: the system tried to check the entries for field for ALL THE ENTRIES,not only for the relevant company code.
If there's a difference of more than 1 fiscal year between the last closed fiscal year for the area you are trying to create, and one of the entries in T093B, then, error AU 158 arises.
Regards Bernhard
Edited by: Bernhard Kirchner on Jul 19, 2010 1:22 PM -
Microsoft Windows Error When Trying To Sync
When trying to sync my 4th gen nano with iTunes I always get a error window that appears saying:
"Do you want to scan and fix STEVE's NANO (F:)?"
There might be a problem with some files on this device or dics. This can happen if you remove the device or disc before all files haven been written to it.
* Scan and fix (recommended)
* Continue without scanning
If I select Scan and fix I get a message saying it could not access the file.
If I continue without scanning sometimes it will sync, other times it won't.
Have no problems with syncing my iPhone. Just the nano.When trying to sync my 4th gen nano with iTunes I always get a error window that appears saying:
"Do you want to scan and fix STEVE's NANO (F:)?"
There might be a problem with some files on this device or dics. This can happen if you remove the device or disc before all files haven been written to it.
* Scan and fix (recommended)
* Continue without scanning
If I select Scan and fix I get a message saying it could not access the file.
If I continue without scanning sometimes it will sync, other times it won't.
Have no problems with syncing my iPhone. Just the nano. -
How do I clear an Error 21 when trying to sync new ipodtouch 5 to itunes?
I am trying to sync a brand new ipod touch and received an error 21. How do you fix/clear this?
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support. -
this is a second hand ipod nano . I think it is the 4th or 5th generation. It worked fine until I tried to sync two new songs and got the error code unknown error (-50) does anyone have any knowledge of this?
Have you looked here:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities -
I first was not able to install ITunes 10.5. Apple upgrade installer caused a data protection execution error and windows reverted the process back to the original software. I then removed ITunes through the control panel ap. I removed Bonjour and quicktime. I could not use the windows uninstaller to remove the apple upgrade installer and had to find a fix it program on the microsoft web site to fully remove this program. After doing this, I was able to load and install itunes 10.5. However, now when I try to sync my new 4S phone, the sync only goes to the 2nd or 3rd step before eliciting a DPE error and causing itunes to shut down. I tried making a new user profile. Opened I tunes in the new profile and began to search for music on my computer. The program again elicited a DPE error. I looked to see if quicken was still on the computer and maybe causing a hangup, but it is no longer installed. Ok, I am at wits end and have spent much too much time on this issue. Please help.
I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923 RESTART UR COMPUTER..
c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.
d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
IPhone4, Gateway Windows Vista 32bit
Maybe you are looking for
-
Q:Determine if a item value has changed
Hello, I am sure I am missing something basic but I just can't figure out how to do accomplish this. I have a form with a radio button (Yes or No) which I need to determine in a Page Process if the user has changed the value to Yes or not. The result
-
Hiding a value available in JTable Cell
I have a JTable with 10 columns and mutilple rows depends on the data available. Some time I will get redundant values displayed in the table. Since I am using the Jtable Header sorting, I need all the values in all the columns. But those duplicate v
-
How to remove an arc correctly?
Can someone explain how to remove an ARC relation correctly? Deleted the arc in the logical model but when I do an "engineer to relational model" the ARC is not removed there.
-
Report Painter selection variables sorting
I have added a number of characteristics to my report painter report and set some as variables i.e. plan version 1, plan version 2, plan version 3, plan version 1 year, plan version 2 year, plan version 3 year. These variables appear on the selection
-
Is it possible to eliminate text bubbles
Is it possible to eliminate text bubbles from imessage? I want straight text, no bubbles