Error when trying to upgrade SQL Azure database using DAC Package in MGMT Studio - "Unexpected XML Content"

Hi there,
I am trying to upgrade a database running in SQL Azure from my local dev box which is running SQL Server 2008 R2 Sp1 (Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64))
I extract the dac with no problems from my local database. However, when I try to upgrade the Azure db I get the below error.
This error occurs just after I browse to select the dac package and click open in the browse window. I.e. It happens before I actually try and apply this dac to the Azure database. Something is going wrong, presumably, when the package is parsed by management
studio.
I am running Visual Studio 2010 Premium Sp1 if that matters, plus all the various updates required for Azure development..
Thanks for your help!

Hey there, and apologies for the lack of response. Are you still having this issue and still needing help?
Thanks Guy

Similar Messages

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

Error when trying to upgrade Dreamweawer

Getting this log message when trying to upgrade:
Dreamweaver CS5.5 11.5.3 Updater
Installationen misslyckades. Felkod: U44M1P7
please advice

NIcolas, Looks like one of th eupgrde steps failed. You will have to open a tac case here as most likely tac will need to get into expert mode adn make some changes to permit you to complete the install. Matthew

Error when trying to write to a socket using nio

Hi,
I am getting this error when trying to write using the new io
The system detected an invalid pointer address in attempting to use a pointer argument in a call
can anyone tell me what's wrong ?

Please post the whole Exception.printStackTrace report. Also a small example that reproduces the problem.

OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

Hi all,
I'm trying to upgrade my RAC installation.
To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database).
When i'm lauching OUI for the Clusterware 10.2.0.1 installation, on the node selection screen, the node is present and selected, but I can't go on, i'm getting an OUI-25023 Error.
Here is the log from this installation:
INFO: Node selection page will be shown because a cluster install is detected on the selected home.
INFO: Setting variable 'CLUSTER_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: The cluster node list 'CAMRDO01' is derived from the Oracle home properties.
INFO: Local node 'camrdo01' is derived from the clusterware stack.
INFO: Setting variable 'LOCAL_NODE' to 'camrdo01'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Rolling upgrade is enabled for this product.
INFO: Setting variable 'REMOTE_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Setting the 'ClusterInstallDescription' property to 'Select nodes (in addition to the local node) in the hardware cluster where the installer should install products that you select in this installation.'.
INFO: Setting the 'SingleInstanceDescription' property to 'Select this option if you want to perform a single node non-cluster installation even though the local node is part of a hardware cluster.'.
INFO: Setting the 'InvalidNodes' property to 'null'.
INFO: Setting the 'AllowRemoteNodeSelection' property to 'true'.
INFO: Setting the 'ShowCRSSoftwareVersion' property to 'false'.
INFO: Setting the 'NewHome' property to 'false'.
INFO: Setting the 'ClusterNodes ( CLUSTER_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Setting the 'LocalNode ( LOCAL_NODE )' property to 'camrdo01'. Received the value from the UI page.
INFO: Setting the 'RemoteNodes ( REMOTE_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Performing tests to see whether nodes CAMRDO01 are available
SEVERE: OUI-25023: The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
INFO: User Selected: Yes/OK
Does anyone have tryed and succeded in upgradnig 10.1.0.3 RAC to 10.2.0.1, and is there any workaround for this problem?
thx for help,
Siftin

Can you check the install log to see if any errors are recorded there ?
http://download.oracle.com/docs/cd/B14117_01/em.101/b12140/A_oui_troubleshooting.htm#sthref268
HTH
Srini

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

Receive TNS error when trying to upgrade DB

I receive a TNS error when I try to upgrade a database using the Database Upgrade Assistant. I want to upgrade to 9.2 from 8.1.7. When I click on the database I want to upgrade I receive the TNS error. It never prompts for a username/password@cstring.
I am trying to run this through Windows Terminal Service, is this the problem? I know there are issues trying to run server manager through WTS.
Thanks,
Jim

I'm new to this, but between Oracle 9.0 and 9.2 the required format appears to have changed for the "TNS Service Name" parameter for a "System DSN" in the Windows "ODBC Data Source Administrator". In 9.0 the "TNS Service Name" can be in either of two formats: global_database_name OR oracle_home$global_database_name. One can verify this by clicking the "Test Connection" button on the the "Oracle ODBC Driver Configuration" screen from the "ODBC Data Source Administrator" window. On a 9.2 system only the first format works. I tested this on freshly-installed systems, each with just one Oracle home and the default sample database.
Perhaps this is related to the problem you are encountering. I was able to fix a problem connecting to 9.2 by changing the "TNS Service Name" parameter. The error I was receiving was: "[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve service name".
Can anyone point me to some documentation on this apparent change between 9.0 and 9.2? Thanks in advance.

I get a disk error when trying to upgrade to mountain lion on my mac book pro that also runs bootcamp

I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

Error while trying to upgrade SQL 2008 (SP2) to SQL 2012: There was a failure to calculate the applicability of setting LICENSEPATH.

Hi,
I am trying to upgrade one of our SQL Server Enterprise (2008 (SP2)) to 2012. I am using the upgrade option but it gives me the following error:
Error Code 0x85640002: There was a failure to calculate the applicability of setting LICENSEPATH
We have downloaded the image from our Volume Licensing account. Also, the same image was used to install SQL 2012 on Windows Server 2012 R2 servers without any issues.
Below is the install summary.txt. I have tried everywhere but no go. Would really appreciate any assistance.
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2057043966
Exit facility code:            1380
Exit error code:               2
Exit message:                  There was a failure to calculate the applicability of setting LICENSEPATH.
Start time:                    2014-02-28 10:58:49
End time:                      2014-02-28 10:58:58
Requested action:              RunRules
Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x0BA02FC6%400x294A9FD9&EvtType=0x0BA02FC6%400x294A9FD9
Machine Properties:
Machine name:                  xxxxxxx
Machine processor count:       2
OS version:                    Windows Server 2008 R2
OS service pack:               Service Pack 1
OS region:                     U.A.E.
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Package properties:
Description:                   Microsoft SQL Server 2012
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
SPLevel:                       0
Installation location:         D:\x64\setup\
Installation edition:
User Input Settings:
ACTION:                        RunRules
CONFIGURATIONFILE:
ENU:                           true
FEATURES:
HELP:                          false
INDICATEPROGRESS:              false
INSTANCENAME:                  <empty>
PID:                           *****
QUIET:                         true
QUIETSIMPLE:                   false
RULES:                         GlobalRules
UIMODE:                        Normal
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140228_105848\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file:               The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
    Message:
        There was a failure to calculate the applicability of setting LICENSEPATH.
    HResult : 0x85640002
        FacilityCode : 1380 (564)
        ErrorCode : 2 (0002)
    Data:
      SettingId = LICENSEPATH
      WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
      DisableWatson = true
    Stack:
        at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
        at Microsoft.SqlServer.Configuration.BootstrapExtension.ValidateChainerSettingAction.ExecuteAction(String actionId)
        at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
        at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
    Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException
        Message:
                There was a failure to calculate the default value of setting LICENSEPATH.
        HResult : 0x85640001
                FacilityCode : 1380 (564)
                ErrorCode : 1 (0001)
        Data:
          SettingId = LICENSEPATH
          WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingValueException@1
        Stack:
                at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
                at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
                at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
                at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
        Inner exception type: System.ArgumentException
            Message:
                        Culture ID 3072 (0x0C00) is not a supported culture.
                        Parameter name: culture
            Stack:
                        at System.Globalization.CultureInfo..ctor(Int32 culture, Boolean useUserOverride)
                        at System.Globalization.CultureTable.GetCultures(CultureTypes types)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLangPackParentFolderForLcid(String lcid)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LcidUtilities.GetLcidFolder(ServiceContainer context, String baseFolderFullPath)
                        at Microsoft.SqlServer.Configuration.SetupExtension.LicensePathSetting.DefaultValue()
                        at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate
subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
                        at Microsoft.SqlServer.Chainer.Infrastructure.Setting`1.CalculateValue()
Regards,
Mohammed

Culture ID 3072 (0x0C00) is not a supported culture.
                        Parameter name: culture
This appears to be the root problem. It seems that the regional settings on this machine is messed up. 0x0C00 is an unusual LCID, they do not normally not end in two zeroes.
is there a custom culture installed on this machine?
Review the regional settings and also check the System locale. If it looks spooky, set it to Arabic - U.A.E. if this is where you are located.
Erland Sommarskog, SQL Server MVP, [email protected]

Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138

Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
Erik

I took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps!

Unsupported File System Error When Trying To Upgrade iPhoto Library on QNAP

I upgraded to iLife11 from iLife08. My iPhoto Library is stored on a QNAP server and has worked just fine for many years. When iPhoto[9] tries to upgrade the library it gives an error "The library could not be opened because the file system of the library's volume is unsupported."
Other iLife11 applications such as iMovie recognize files from the QNAP just fine.
I have tried moving the original iPhoto Library into another folder and then creating a new library on the server but get the same message.
I have upgraded to iPhoto 9.0.1 already.
Any ideas?
Appreciation In Advance.

my NAS backup is going to see the whole disk image as a 'new file' and
I don't think that will be the case if you use a sparse bundle disk image.
+A sparse bundle is essentially the same as a sparse disk image. The difference is that a sparse image is one giant file on your disk and a sparse bundle is lots of small files (8 megabytes each). They work and look the same way, but you can right-click on a sparse bundle, select "show package contents" and see the individual 8 meg sections.+
If the backup software can do incremental backups and work on packages I think it will work on the sparse bundle disk image. Might be worth a try.
Happy New Year

Error when trying to reverse a goods receipt using vl09

Hi All,
I'm trying to reverse an inbound delivery using vl09. Getting a message that
"Error at central message handling" . After this the system is throwing me out of the tcode vl09.
Any idea why this is appearing and how to overcome this.
Regards,
Ashwin

Hello
Please refer the previous thred
"Inbound delivery reversal issue
and also the SAP notes mentioned in earlier reply.
warm reards
Ramakrihsna

Error when trying to upgrade SQL Azure database using DAC Package in MGMT Studio - "Unexpected XML Content"

Similar Messages

Maybe you are looking for