Error when trying to view siebel data from BI Publisher

Hi,
I am trying to view Siebel data in BI publisher via a web service (webservice definition is set to complex in BIP) but when I try to do this I receive the message 'Requested data type does not match with existing data type'.
I am using version 10.1.3.3 of BI Publisher and 8.1.1.2 of Siebel E Clinical.

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Similar Messages

CUOM error when trying to poll performance data from IPCC Express

Hi Network Professionals,
Using CUOM 2.1 SP1 I get an error when trying to access the Performance menu for a IPCC Express Server in the Service Level View.
Error Message:
Performance polling is not supported for the current capability.
The server is fully monitored and I get enviroment, system, interface and application information.
I the Polling Parameters menu (Voice Utilization Settings) the only parameter listed is "Communication Manager and Registred MGCP Gateway Utilization".
The IPCC Express version is 5.0.(2)SR01_Build045.
Is anything missing on the IPCC server? I have only configured it with SNMP.
Kind Regards
Johnny Olsen

hi teresa.
well I bother you because I have a problem similar to that raised earlier, I have a vm INTAL CUOM 2.1 SP1 and the problem is that computers add-in-law his administration IPCC view the service level ... but when I fall into a custom group created the group and add the teams the same ip ipcc already visible, in my group I want to generate displays custom cloud but do not show me the equipment, except that I want to add IVR servers and I do not under any circumstances the samples .. lso probe and reset everything and anything related services, install the SP! and nothing. Can you help me with this or if I recommend CUOM up version of the 2.3 that I could not even see the difference with 2.1 CUOM thanks greetings

Database error when trying to view Crystal Report from InfoView

I am receiving the following error when I try to view or run a Crystal Report from the InfoView. The report is based on an SAP InfoSet.
"Failed to load database information."
The report data can be refreshed with no trouble from within the Crystal Reports designer on my local machine, but the error occurs after it is published to the InfoView. The same error appears when trying to import into Excel using LiveOffice.
Server details:
-Edge 3.1
-Windows 2003 64-bit
-SAP Integration kit installed
Local Crystal Reports machine details:
-Windows XP
-SAP Integration kit installed
-Crystal Reports 2008
My steps to troubleshoot so far:
-Checked Database Logon details in CMC for the report. Username and password are entered correctly.
-Cycled all CrystalReports background services off and on again from the CMC
-Rebooted server
Have I missed anything? Any help would be appreciated.

Hi,
do you have any connectivity from your EDGE to the SAP System ? Like can you import roles or run a WebI ?
Regards
-Seb.

BSP Authorisation error when trying to view BSP page from workitem

Hi All,
I developed a bsp application that initiates a workflow.
The application generated successfully and the workflow was activated and no errors appear in the workflow log.
When I try to view the bsp from the workitem, I get an error message
u2018You are not authorized to view this pageu2019
If I was to view the page from bsp application, I would have to login again to the bsp application.
Is this what is stopping me viewing the bsp page directly from the workitem?
How can I create this login to the bsp server from my workflow?
Can I remove this login to the bsp server?
thanks

Hi Brendan Gibbons,
The authorization for viewing the bsp application through se80 is different from viewing the bsp application from the workitem.
For example
I am abap developer, i have authorization for se38 and i have authorization to view/change the program what i have created, but i can view the program what some one has created but i dont have authorization for changing it. The same apply's here too.
Kindly check with the basic consultant.
Thanks and Regards
Balaji E.

OWB Error ENT-06972 when trying to view dimension data

Hi,
I got this error while trying to view the data I just loaded into a particular dimension:
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
(and when I clink on "Details"):
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.getDimensionListObject(DimDataViewerMain.java:479)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:89)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Do you have any idea what it might be?
Thanks in advance for your help,
--Oswaldo
[osantos]

i have the same problem... Could anyone say something?
Please...
Thanks,
Alex.

Error when trying to view purchased items in app store

My ipad has an error when trying to view my "purchased" items in app store, keeps "Loading...." for a while and then close the app.
All the other options works well (featured, top charts, genius, updates...)
I already turn off / on the ipad many times, same problem....

I have the same problem with my iPhone 4s! Need a solution from Apple!

Getting a 1809 error when trying to remote control PC from the Console.

This is message i get when trying to remote view or remote control PC.....
1809: An error has occurred while generating a session key for
encryption.The remote session cannot be initiated. Contact Novell
Techical Services and specify this code.

This is for a 1807 error. My error is and 1809 error. Is there somewhere
else to research on a 1809 error when trying to remote control PC from
the Console?
> Perhaps.................
>
> http://support.novell.com/techcenter/search/search.do?
cmd=displayKC&docType=kc&externalId=10094808html&s liceId=&dialogID=2356487
>
> --
> Craig Wilson
> Novell Product Support Forum Sysop
> Master CNE, MCSE 2003, CCNA
>
> Editor - http://www.ithowto.com
>
> (Seeking Full-Time Expert? Drop me a note :> )
> <[email protected]> wrote in message
> news:09i_e.2044$[email protected]..
> > This is message i get when trying to remote view or remote control
PC.....
> >
> >
> > 1809: An error has occurred while generating a session key for
> > encryption.The remote session cannot be initiated. Contact Novell
> > Techical Services and specify this code.
>
>

When trying to view a pdf from IE10 I get a small square with an X and not the document.

When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

Hi,
We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
Before running these steps please make sure yours indeed is the same problem.
Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
Let me know how it goes.
Thank You.

Error when trying to view YouTube videos

I get the following error when trying to view YouTube videos in some wireless hotspots; "The server is not correctly configured". It used to work fine at these locations.

Maybe not as many people reply as you think should because this site doesn't freaking work either!
Took me ten minutes to log in! Kept getting stupid error messages telling me this site is undergoing maintenance. Whatever.
Same exact problem here, but Chrome DOES NOT work. Changing DNS servers DOES NOT work either. It doesn't work for a lot of people.
https://productforums.google.com/forum/#!topic/youtube/axsb7XPieK0
EDIT**
WTF this site is more broken than youtube! Constant errors and constantly unresponsive with "greyed out" buttons!
Is there any competent people left on the planet to fix this crap!?

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

Chuckwagons post - error when trying to view

In trying to view chuckwagons post, "just received my new iMac 2.1" (http://discussions.apple.com/thread.jspa?threadID=319765&tstart=0), I keep getting an error. It just says an error has occurred and we apologize for the inconvenience. However, I notice that new posts are being added so some folks are able to read and post. Is anyone else getting an error when trying to view this post? I've tried Safari, Firefox and IE. I'm trying to make up my mind as to which iMac I want - G5 or Core Duo. Right now I'm leaning towards the G5 and it would be nice to be able to see what chuckwagon has to say.
Eric S.
Mini 1.25, 512MB RAM, 80GB HD Mac OS X (10.4.4) G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 Pro

This is really beginning to tick me off. There has been another post to chuckwagons message and a lot more views. However, I am still getting the same error that I've been getting since yesterday. And it doesn't matter which computer I'm using, the result is always the same.
Arrghhh!!
Eric s.
Mini 1.25, 512MB RAM, 80GB HD Mac OS X (10.4.4) G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 Pro

Authorization error when trying to view Infocube content

Hi,
I have created one Infocube and loaded the data.When I am trying to view the contents from manage screen,im getting the below mentioned error.
Your user master record is not sufficiently maintained for object Auth Obj for Personnel Area - 0PERS_AREA
Message no. BRAIN805
Diagnosis
When checking your authorizations for object 'Auth Obj for Personnel Area - 0PERS_AREA' (technical name: ZHR_0PERSA) it was established that you do not have authorization in your user master record for this object (return code 12).
Procedure
How you continue depends on the return code. See the online documentation for ABAP language element "AUTHORITY-CHECK". Please note:
With a return code of 12, the object 'Auth Obj for Personnel Area - 0PERS_AREA' has not been maintained in the user master, meaning there is no profile in the user master record in which this authorization object has been entered. This is, however, absolutely necessary, as all of the authorization objects created in the development class RSR are validated in the 'and' link. If the authorization is missing for only one object, the request is rejected as unauthorized.
Get the person responsible for your authorization to create you a profile containing authorization for object Auth Obj for Personnel Area - 0PERS_AREA.
need help on this
Thanks In Advance..

Hi,
First check in RSSM whether your InfoProvider is checked for authorization object 0PERS_AREA. Also determine whether do you need this authorization object ?If yes, then it should be checked otherwise check mark should be unchecked. If 0PERS_AREA is checked for your InfoProvider, then you should have some value in this object when you create the role. Either * for all values or restricted value for it. Goto Pfcg select the role and add the authorization values for the 0PERS_AREAobject.
GSM.

Error When trying to load master data 0material

Hi,
I got the following error when trying to laod 0MATERIAL master data
"value '000000000004343434 ' for characteristic 0MATERIAL is in external format "
"0MATERIAL : Data record 1 ('000000000004343434 '): Version '000000000004343434 ' is not valid
Can anybody help me in resolving this issue.
Regards

Hi,
Run transaction OMSL.
Create an entry for MATCONV in the overview screen.
Double click on this line and set the length parameter for MATCONV.
the same transaction exists in the r/3 OLTP system compare the 2 systems to set the right values in the details screen in BW.
Hope this helps
Provide points if it does.
Regards
Lalan

Getting an error when tried to access task form from worklist app

Hi All,
I am using 10.1.3.4 BPEL PM. I have created a bpel process with a human task.
From the worklist application, when the approver clicks on: Task Id (ideally it should open task form).
In my case, I am getting an error:
Error while inoking URL to display the content. Error while invoking URL. http://bluejays.appsassociates.com:7780/default/EditPayloadPOC1/v2009_05_21__82618/EditPayloadPOC1/EditPayloadPOC1.jsp Check the underlying exception and correct the error. Contact oracle support if error is not fixable..
If you need more information, please check with your administrator with the following exception-identifier: "2009/05/21_12:16:43:777_oc4jadmin"
It works fine in SOA suite 10.1.3.1. and does not work in BPEL PM 10.1.3.4
The only difference is I deployed in 10.1.3.1 using Ant script of bpel project and in 10.1.3.4 I deployed using the BPEL Console itself by browsing the project jar(Since I am getting error when tried to deploy it using Ant).
Is it a known bug or am I making anything wrong. Tried with both Autogeneration and Custom form
I followed: http://download.oracle.com/docs/cd/E11036_01/integrate.1013/b28981/workflow.htm#BABCBAEI
Thanks
Sakrishna Panuganti

Hi does your bpel process has more than one human tasks, e.g., HumanTask1, HumanTask2, HumanTask3...then pl. check and manually fix this below ...e.g.,
check for all of the human tasks workflow contexts tasks forms for dynamic pointers for
domain_id, process_id, process_version.
edit public_html/HumanTask1/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask1</context-root>
edit public_html/HumanTask2/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask2</context-root>
edit vi public_html/HumanTask3/form/ear/META-INF/application.xml
<web-uri>workflowform.war</web-uri>
<conteit-root>/${domain_id}/${process_id}/${process_revision}/HumanTask3</context-root>
and deploy the process again via jdeveloper or preferably via ant script and try, it worked just fine for us.

Error when trying to view vids on Facebook on Revolution- Have to force close

Have to force close when trying to view a video on Facebook that was posted with phone. Youtube vids work great it's just not working with ones that were posted by phones and it has worked since I got the phone about a month ago

DionM_VZW wrote:
bulldog69 wrote:
Have to force close when trying to view a video on Facebook that was posted with phone. Youtube vids work great it's just not working with ones that were posted by phones and it has worked since I got the phone about a month ago
Hello bulldog69! So, these videos you're trying to watch. Were they posted using your phone or someone else's phone? Are the videos viewable using a desktop/laptop computer?
The videos are posted on Facebook that someone else posted from phone and my own. It is friends videos which always worked on Fascinate and vids work great on computer. I think a few days ago was able to view one and today same thing have to click force close and even tried using our wifi and same problem. Pulled battery and restarted no luck. So far vids on YouTube work great on Revolution

Error when trying to view siebel data from BI Publisher

Similar Messages

Maybe you are looking for