Error when undate solution manager from 700 to 701(700 enp1)

Hi all,
error when undate solution manager from 700 to 701(700 enp1),error:OCS package SAPKITL428 does not match the current software component vector.
My current supportstack is as follows :
SAP_ABA 700 0016 SAPKA70016
SAP_BASIS 700 0016 SAPKB70016
PI_BASIS 2005_1_700 0016 SAPKIPYM08
ST-PI 2008_1_700 0002 SAPKITLRD1
SAP_BW 700 0018 SAPKW70018
SAP_AP 700 0014 SAPKNA7014
BBPCRM 500 0012 SAPKU50012
CPRXRPM 400 0014 SAPK-40016INCPRXRPM
ST 400 0017 SAPKITL427
ST-A/PI 01L_CRM570 0000 -
ST-ICO 150_700 0017 SAPK-1507KINSTPL
ST-SER 700_2008_1 0005 SAPKITLOO5

Hi,
Because prerequisite to apply this package is not met. To apply this package below is the prerequisite which i can see in your package level is not met:
Support Packages
Package      Value
SAPKU50012      T
SAPK-70401INBICONT      T
SAPK-40013INCPRXRPM      T
SAPK-50001INCRMUIF      T
SAPKA70102      T
SAPKNA7012      T
SAPKB70101      T
SAPKB70102      T
SAPK-701DHINSAPBASIS      T
SAPKITL427
Thanks
Sunny

Similar Messages

Error when Installing Solution Manager for XI

Hi,
I am currently installing the SAP Solution Manager in a new server before I am going to install SAP XI. This is because I need the Solution Manager to generate a Key for the XI installation. I am choosing a typical installation. However, I keep hitting into Installation errors as below:
ERROR 2008-01-04 17:42:37.279
FSL-01002 Unable to create account sinitasd1201\SAPServiceDSS. HRESULT=0x80005009
ERROR 2008-01-04 17:42:37.279
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-01-04 17:42:37.279
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
There are a total of 43 steps at the installation, and this error occurs at Step 2.
There are a few questions which I need some help:
1) Since the server is fresh, and it is a new installation, when defining parameters during installation, do I choose "Register in existing central SLD" or "Configure a new SLD"?
1a) If I need to choose "Register in existing central SLD", what values should I input for SLD HTTP Host, SLD HTTP Port, SLD Gateway Host and SLD Gateway Instant Number?
1b) If I need to choose "Configure a new SLD", what value should I input for the Object Server Name?
2) Any ideas what the errors above is about and how to solve them?
Please kindly advise, thank you.

Hi,
Thanks for your help. Now I am able to get pass step 2, and now I am hitting an error at step 34, "Start Java Engine". The error in the log file is:
ERROR 2008-01-09 09:48:08.629
CJS-30150 Java processes of instance DSS/DVEBMGS00 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:00 minutes. Giving up.
ERROR 2008-01-09 09:48:08.629
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
Do you know how to overcome this issue? Please kindly help. Thank you.

Error when installing Solution Manager

I'm tring to install Solutionmanger 7 SR2 on a windows 2003 32bit Server. and facing this issue. I have US_export_policy.jar and local_policy.jar are installed properly. But still getting following issue...
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "
SOLMANSTM/sapmnt/STM/SYS/global/security/data/SecStore.key".
     at com.sap.security.core.server.secstorefs.KeyHandler.writeKeyIntoFile(KeyHandler.java:618)
     at com.sap.security.core.server.secstorefs.KeyHandler.setNewKeyInFile(KeyHandler.java:666)
     at com.sap.security.core.server.secstorefs.Crypt.setNewKeyInFile(Crypt.java:502)
     at com.sap.security.core.server.secstorefs.SecStoreFS.createStoreWithEncryption(SecStoreFS.java:1739)
     at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:842)
     at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1274)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: java.io.FileNotFoundException:
SOLMANSTM\sapmnt\STM\SYS\global\security\data\SecStore.key (The specified network name is no longer available)
     at java.io.FileOutputStream.open(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
     at com.sap.security.core.server.secstorefs.KeyHandler.writeKeyIntoFile(KeyHandler.java:611)
     ... 10 more
Please help.

> Caused by: java.io.FileNotFoundException:
SOLMANSTM\sapmnt\STM\SYS\global\security\data\SecStore.key (The specified network name is no longer available)
It sems that this share is no more available/accessible for user SAPService<SID>.
Can you access that using
dir \\SOLMANSTM\sapmnt\STM\SYS\global\security\data\SecStore.key
in a cmd.exe?
Markus

Error when determining a number from object BI_ODS

Error When determining a number from object BI_ODS and number 01 when flat file source system is assigned to transfer rules of infosource , when activating this error occured .
plz need solution.

Hi,
Number ranges can be maintained through the transaction SNRO. For details check:
http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02e3493111d182b70000e829fbfe/frameset.htm
Rgds-
Sonal

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when determining a number from object BI_TSDTEL and number 01

Hi BW Experts,
After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
"Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
Transfer structure 0IM_FA_IQ_2_SA does not exist
Error RSAR 440 when handling objects with type R3TR ISTS."
I have gone through the Note: 674818.
Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
Because I have not seen the Intervals in R/3 ( Dev & QA) systems.
please could someone provide Inputs for this.
Thanks in Advance
Regards
SK

Hi,
Try to see that transfer structure is existing in the sytem which is connecting in
the BW quality.
You need the same to be transported from the development server of R/3 to quality server of R/3.
Just check if this helps.
Regards
Rahul Bindroo

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

WLST - error when i start managed server using nmstart() command.

i am receiving an error when start the managed server using nmstart(). Please advise.
Do I have add any parameter to nodemanager.properties file?
Thankyou
pasted below is the error message i am receiving when i start managed server.
Starting server hssclient ...This Exception occured at Thu Mar 19 10:30:02 EDT 2
009.
java.lang.IllegalArgumentException: Invalid host name: Null or empty
at weblogic.nodemanager.client.NMClient.checkNullOrEmpty(NMClient.java:7
2)
at weblogic.nodemanager.client.NMClient.setHost(NMClient.java:79)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:527)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:565)
at weblogic.nodemanager.mbean.NodeManagerRuntime.start(NodeManagerRuntim
e.java:188)
at weblogic.server.ServerLifeCycleRuntime.startServer(ServerLifeCycleRun
time.java:439)
at weblogic.server.ServerLifeCycleRuntime.start(ServerLifeCycleRuntime.j
ava:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean
.java:428)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImp
l.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultM
BeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBea
nServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:248)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterce
ptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:63)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(
SecurityInterceptor.java:426)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10$1.run(AuthenticatedSubjectInterceptor.java:582)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10.run(AuthenticatedSubjectInterceptor.java:580)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor.invoke(AuthenticatedSubjectInterceptor.java:573)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanSer
ver.java:310)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnecti
onImpl.java:1410)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectio
nImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run
(RMIConnectionImpl.java:1247)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(R
MIConnectionImpl.java:1350)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImp
l.java:784)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown S
ource)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:553)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:443)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:439)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:6
1)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicSer
verRef.java:983)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Hi I am getting below exception, is nmStart only start AdminServer ????
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, MS1, does not match the admin server name, AdminServer
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 10, 2010 1:45:17 PM UTC> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 8275>
<Feb 10, 2010 1:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
~

Helpme I have error when I try connect from struts to web service

helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized

1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha

Accessing Document URL in SAP Solution Manager from SAP R/3 using BAPI

I want to access the hyperlink corresponding to a document present in Solution Manager from another system (i.e SAP R/3). The hyperlink can be generated manually by clicking on the button "Generate" present in Solution Manager. Can anyone please help me advising any BAPI to generate this hyperlink, or any standard function module for generated such a hyperlink used in Solution Manager so that I can define a custom BAPI.
Thanks in advance!

Hi Alvaro Hernán Rojas R ,
The product line is the hierarchy of the finished goods.
It is pertinent that the finished goods has emerged due to some process(es) carried on the raw material.
Thus logically you should map in solution manager based on the process only.
The macro process while depicts the processes at the highest level.The Business scenarios, Business Process gives a good idea about how you should go about configuring.The Steps/activities helps you to map in to SAP thro' T/Codes.
From the point of view of all of the below three,namely,
Easy configuration activities
Easy design of Unit and integration test
Easy activities of Process enhancement and optimization,
the option Map the process as ISO Standards
- Several projects : For each product line,will be most ideal.
It is the processes that drives the activities.The control activities like internal control etc are all process based.Given these,divorcing the business process from the configuration -as in -is certainly not a good practice.
Hope this helps.
Regards,
Ramesh

Where do i download SAP solution manager from?

Good day,
where do i download SAP solution manager from ? i tried using this link which was shown in some other websites , but it does'nt seem to work.
The link is :
http://service.sap.com/swdc -> Download -> Installations and Upgrades -> Entry by Application Group -> Installations and Upgrades -> SAP Technology Components -> SAP Support Enablement Package - >SAP Support Enabl. Package 1.0
Many thanks
Kripashankar.N

SEP is an additional package on top of Solman which must be licensed separately.
http://service.sap.com/swdc -> Download -> Installations and Upgrades -> Entry by Application Group -> Installations and Upgrades -> SAP Technology Components
That is the right path - if you don´t see SolMan you have to either contact your sales person so that you get an installation number or create a call at XX-SER-CONTR and ask for an installation number for SolMan and the download permissions.
Markus

Error when undate solution manager from 700 to 701(700 enp1)

Similar Messages

Maybe you are looking for