Error when unlock IT0009

Hi experts,
I got error 'No data record for key 0007033400090     X9999123120100101000 before changing' when I was unlocking infotype 0009. Anyone knows what cause it?
Regards,
Erli Hartono

Were there any bank keys or records deleted?

Similar Messages

  • Error when unlock device from Afaria 7 SP 4

    Hi
    I'm not able to unlock Windows Mobile Professional 6.5 from Afaria and getting an error:
    The Server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .Net Framework SDK documentation and inspect the server trace logs.
    Is there any solution?
    Thanks in advance

    Hi
    Does this happens with all Windows Mobile Professional devices or just this one?
    Are you able to turn on IncludeExceptionDetailInFaults, so that additional information can be seen?
    Also, please can you indicate which version of Afaria and any Service Packs/Hot Fixes you are running, then we can check about any known/fixed issues related to this.
    Regards
    Nick

  • Error when converting a constant amount MAXBT in T511P

    Dear Expert,
    I am encounter error as below when run payroll for Macao,
    Error when converting a constant amount MAXBT in T511P
    CONVERT_TO_LOCAL_CURRENCY has been Called
    Data used:
    Validity end date: 28.02.2014
    Constant: MAXBT
    T511P Currency MOP
    Currency of payroll driver HKD
    Therefor, do the checking on OE00 and check the currency and validity dates for MOP currency.
    Also, checked table V_T001 table the currency that assigned for the company code.
    Checked the MOP currency and ISO code in V_TCURC table. And checked ISO code in V_CURC  table as well.
    Still encounter error as above, appreciate you advice.
    Thanks,
    Mel

    What are the values for :
    Country grouping for PA/PSA:
    Currency appearing in IT0008:
    Country key in IT0006:
    Bank Country in IT0009:

  • Error when updating Playbook OS version via Blackberry Desktop Manager

    Greeting,
    I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
    But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
    I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
    I've attached the step by step screenshots for reference, where you can find here:
    http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
    Thanks,

    BLock wrote:
    Sorry I can not help you with your problem but perhaps you can help me.  
    Can you advise where I can find info on "disable the automatic update"?
    just ignore the update if you dont want it on the playbook
    for reloading the OS
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • RFC error when sending logon data

    Hi;
    We cannot configure the STMS of our development system. When we try to
    configure it, system gives an error message: Errors during distribution
    of tp configuration; TMS Alert Viewers tells us
    RFC_COMMUNICATION_FAILURE: RFC communications error with
    system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
    data and READ_PROFILE_FAILED:File
    erptest\sapmnt\trans\bin\TPPARAM
    could not be opened for reading (No such file or directory).
    Is there any advise for solution?
    Best regards
    Noyan
    PS: Please find the profiles below:
    START:
    #.*       Start profile START_DVEBMGS00_erptest                                                                                *
    #.*       Version                 = 000006                                                                                *
    #.*       Generated by user = BASIS                                                                                *
    #.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
    generated by R3SETUP
    SAPSYSTEMNAME = FKT
    INSTANCE_NAME = DVEBMGS00
    SAPSYSTEM = 00
    SAPGLOBALHOST = erptest
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    start database
    #_DB = strdbs.cmd
    #Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
    start message server
    #_MS = msg_server.exe
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    Start IGS
    Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
    start application server
    #_DW = disp+work.exe
    #Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
      General parameters for starting the system
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEM = 00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEMNAME = FKT
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #INSTANCE_NAME = DVEBMGS00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPGLOBALHOST = erptest
      Start database
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DB = strdbs.cmd
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
      Start message server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    MS = msgserver.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
      Start applications server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DW = disp+work.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    DEFAULT:
    SAPDBHOST = ERPTEST
    dbms/type = mss
    dbs/mss/server = ERPTEST
    dbs/mss/dbname = FKT
    dbs/mss/schema = fkt
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPFQDN = tr.delta.is
    SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
    SAPDBHOST = erptest
    SAPTRANSHOST = erptest
    DIR_TRANS =
    $(SAPTRANSHOST)\sapmnt\trans
    #DIR_TRANS = D:\usr\sap\trans
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    SAP Message Server for ABAP
    rdisp/mshost = erptest
    rdisp/sna_gateway = erptest
    rdisp/sna_gw_service = sapgw00
    rdisp/vbname = erptest_FKT_00
    rdisp/enqname = erptest_FKT_00
    rdisp/btcname = erptest_FKT_00
    rdisp/msserv = sapmsFKT
    rdisp/msserv_internal = 3900
    rdisp/bufrefmode = sendoff,exeauto
    login/system_client = 200
    #GUVENLIK PARAMETRELERI
    login/password_expiration_time = 90
    login/min_password_lng = 6
    #parameter created                          by: BASIS        25.03.2004 08:41:25
    rdisp/gui_auto_logout = 10800
    #parameter created                          by: BASIS        25.03.2004 08:37:47
    #old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
    login/fails_to_user_lock = 6
    #validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
    #parameter created                          by: BASIS        16.06.2007 17:35:41
    #old_value: 2
    #changed:  BASIS         14.05.2008  15:24:55
    auth/rfc_authority_check = 1
    #otomatik unlocki iptal eder
    #parameter created                          by: BASIS        10.11.2006 17:47:15
    login/failed_user_auto_unlock = 0
    #AUDIT PARAMETRELER?
    #old_value:                                   changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_day = 1996800000
    #old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
    #old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
    rsau/max_diskspace/local = 2048000000
    #old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
    #old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
    #old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_file = 665600000
    rsau/enable = 1
    rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
    rsau/selection_slots = 12
    #rec/client = ALL
    DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
    FN_AUDIT = ++++++++######..AUD
    #DIL PARAMETRELERI
    #Turkish codepage settings
    abap/import_char_conversion = 0
    install/codepage/db/non_transp = 1610
    install/codepage/db/transp = 1610
    zcsa/installed_languages = DET
    #zcsa/system_language = E
    zcsa/system_language = T
    zcsa/second_language = E
    install/codepage/appl_server = 1610
    #OS dependent
    abap/locale_ctype = Turkish_turkey.28599
    #DIR_PUT = D:\usr\sap\FKQ\upg\abap
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/msserv_internal = 3900
    #system/type = ABAP
    INSTANCE:
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPSYSTEM = 00
    INSTANCE_NAME = DVEBMGS00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
    icm/server_port_0 = PROT=HTTP,PORT=80$$
    SAP Message Server parameters are set in the DEFAULT.PFL
    ms/server_port_0 = PROT=HTTP,PORT=81$$
    #rdisp/wp_no_dia = 10
    #rdisp/wp_no_btc = 3
    #rdisp/wp_no_enq = 1
    #rdisp/wp_no_vb = 1
    #rdisp/wp_no_vb2 = 1
    #disp/wp_no_spo = 1
    rdisp/wp_no_dia = 12
    rdisp/wp_no_vb = 3
    rdisp/wp_no_vb2 = 0
    rdisp/wp_no_enq = 1
    rdisp/wp_no_btc = 3
    rdisp/wp_no_spo = 1
    #PERFORMANS PARAMETRELERI
    #parameter created                          by: SAP*         08.08.2001 10:30:18
    abap/fieldexit = yes
    #parameter created                          by: ALPER        13.10.2000 18:24:16
    install/collate/active = 1
    rdisp/max_wprun_time = 25000
    MEMORY_NO_MORE_PAGING dump nedeniyle
    #parameter created                          by: BASIS        27.12.2006 17:00:22
    rdisp/PG_MAXFS = 262144
    abap/heap_area_nondia = 2000000000
    rdisp/PG_SHM = 16384
    rdisp/ROLL_SHM = 32768
    #'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
    #Note 552209 - Maximum memory utilization for processes on NT/Win2000
    #parameter created                          by: BASIS        30.10.2007 10:57:24
    #abap/heap_area_nondia = 50000
    #parameter created                          by: BASIS        30.10.2007 10:58:54
    #rdisp/PG_SHM = 0
    #parameter created                          by: BASIS        30.10.2007 10:58:27
    #rdisp/ROLL_SHM = 625
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:57
    dbs/mss/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:33
    dbs/oledb/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:48:23
    dbs/oledb/add_procs = 8
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:29
    rsdb/esm/max_objects = 2000
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:03
    rsdb/otr/buffersize_kb = 4096
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:46:21
    rsdb/esm/buffersize_kb = 4096
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:18:14
    ztta/parameter_area = 16000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:43
    enque/table_size = 10000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:20
    gw/max_sys = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:01
    gw/max_overflow_size = 25000000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:15:19
    rdisp/max_comm_entries = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:48
    rdisp/tm_max_no = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:20
    gw/max_conn = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:13:42
    rdisp/max_arq = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:12:57
    ztta/roll_area = 3500000
    #parameter created                          by: BASIS        18.05.2005 09:20:25
    #old_value: 90                                changed: BASIS 18.05.2005 09:22:25
    rdisp/max_hold_time = 300
    #parameter created                          by: BASIS        20.08.2003 12:10:20
    #old_value: 6144
    #changed:  BASIS         03.01.2008  19:42:10
    rsdb/obj/buffersize = 20000
    #parameter created                          by: BASIS        20.08.2003 12:09:48
    #old_value: 6000
    #changed:  BASIS         03.01.2008  19:42:59
    rsdb/obj/max_objects = 20000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:42:11
    #old_value: 250000
    #changed:  BASIS         30.10.2007  10:56:17
    #abap/buffersize = 100000
    #changed:  BASIS         03.01.2008  19:40:36
    #abap/buffersize = 300000
    #by: BASIS 12.06.2008
    abap/buffersize = 400000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:41:32
    #zcsa/presentation_buffer_area = 20000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    zcsa/presentation_buffer_area = 30000768
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:55
    rsdb/ntab/ftabsize = 30000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:12
    rtbb/max_tables = 500
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:39:15
    #old_value: 20000
    #changed:  BASIS         03.01.2008  19:41:29
    #rtbb/buffer_length = 30000
    #64 bite gectikten sonra  by: BASIS 10.06.2008
    rtbb/buffer_length = 50000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:38:26
    zcsa/db_max_buftab = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:37:37
    #zcsa/table_buffer_area = 50000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    #zcsa/table_buffer_area = 89000000
    by: BASIS 12.06.08
    zcsa/table_buffer_area = 99000000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:54
    sap/bufdir_entries = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:12
    rsdb/cua/buffersize = 8000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:34:46
    #old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/sntabsize = 5500
    #parameter created                          by: BASIS        08.07.2003 20:33:56
    #note 103747
    #old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
    #old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/irbdsize = 11000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:32:18
    rsdb/ntab/entrycount = 40000
    #old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
    #old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
    PHYS_MEMSIZE = 4096
    #64 bite gectikten sonra   by: BASIS  10.06.2008
    abap/heaplimit = 40894464
    abap/heap_area_total = 2000683008
    ztta/roll_extension = 2000683008
    em/blocksize_KB = 4096
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/elem_per_queue = 2000
    #auth/auth_number_in_userbuffer = 9000
    #snc/enable = 0

    Hi Srikishan;
    You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
    Thanks for your help and interest
    Best regards
    Noyan

  • SOLVED: Getting an Input/Output error when accessing certain files

    My system started failing a few days ago because of sudden Input/Output errors when trying to access certain files. It was running fine until various applications started crashing like for example Pidgin (in retrospect probably because of DBus crashing). I decided to reboot and now can't login anymore because the DBus module fails to load which in turn means that HAL doesn't load either and so I can't use my keyboard to login.
    The error message I get from DBus is that it can't access the file /etc/dbus-1/system.d/org.freedesktop.PolicyKit.conf because of an Input/Output error. I tried to fix/see what was wrong using the arch livecd. Because I thought my problem had to do with a pacman update that had failed before I'd rebooted, I updated my system and I noticed that when pacman tried to access other files it came back with the same error message. The files seemed pretty random, one of them was fakeroot.conf and then several library files like libfaad (sorry this is kind of vague but I'm away from home right now and can't go online very often so I'm writing this from memory).
    I'm guessing its a hard drive problem because checking the filesystem for errors came back with nothing. I was just wondering whether anyone had any other ideas before I go and reinstall. I'm going back home tomorrow so I'll be able to follow any advice/reinstall then.
    Last edited by siell (2010-04-08 17:01:37)

    UPDATE
    It seems to be fixed! The second run of e2fsck fixed some more issues and the files that were causing the problems earlier seemed to have bad inodes. Boots fine now and I can get into my system. I checked and I still have a reasonable amount of free space so I don't think that was the reason ... I have no idea how the filesystem got so corrupted out of nowhere.
    A few things are different, for example, it asked me to unlock the keyring and I couldn't mount my external encrypted drive anymore and had to do it manually with cryptsetup. e2fsck made quite a few changes so I imagine it's due to that. Shouldn't be to hard to fix though.
    Thanks for your help!

  • Errors when transporting query

    I face errors when transporting a query.  I have checked the release and import logs and have noticed the following:
    Release Log:
    There are 5 query elements which have been deleted
    Import Log:
    The query is not active only a modified version of the query is present.
    I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
    The problem that I have is that the majority of the objects are locked in a BEx transport. 
    The only option of unlocking is each of the objects from the BEx transport, locking in my transport.  Is this the way to do this or is there any consequences or a better way?
    Thanks

    Hi
    as you have transport request with all the collected objects, follow the below steps
    1) goto SE03, in left side you will have option "unlock the objects from transport"
    in the next screen give the transport request and execute
    now activate the query once and goto transport connection in RSA1.
    here collect your query into transport request.
    release it and import the same into next system.
    Regards,
    Venkatesh

  • Employee Photo Upload Fail - "System error when archiving"

    Hi all,
       When i am trying upload a photo of an employee in our ESS development portal its working fine. But the issue here is when i am trying to upload the same in testing ESS portal its displaying an error message as "System error when archiving a photo" and i tried to upload the photo in back end also at that time its displaying an error as "HTTP error :401 unauthorized".
    Kindly help me to resolve this problem ASAP.
    URGENT!!!!!!!
    Thanks in advance..!!!

    Hi Van,
      Thank you for your reply. Finally we found the solution for this. The Issue was that the user CONT_SERVER in SICF(tcode) -> Content Server was locked. We unlocked it , now the photos are uploading successfully...

  • I am getting an error when trying to download  the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege  to make changes. I have not had this problem before

    I am getting an error when trying to download  the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege  to make changes. I have not had this problem before

    Solution:
    Open Disk Utility.
    Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
    This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

  • I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

    I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
    i tried adding user macintosh hd/users/your_user/pictures/"photo booth"  but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Error when connecting to Visual Administrator

    Hi Experts,
         Im getting this error when trying to connect to visual administrator...
    Im basis, and already ask to the IT team to open the port 50004 so the Visual administrator can connect. Their answer was that the port is open waiting for a tool to ask to connect to it. I´ve been looking for info in regards this issue unsuccessfully, can't find anything. Any ideas????
    Thanks in advance...

    Hi,
    Administrator user may be locked you can unlock and then try to connect Visual Administrator and please read below link
    Visual Administrator: Logon Failure (SAP Library - SAP NetWeaver? Problem Analysis Guide (PAG))
    Thanks
    Brahma.

  • Error when re-compiling a package

    I get the following error when I re-compile my package.
    Yesterday someone has compiled this package and changes are reflected.
    How to get this package unlocked???.
    ERROR at line 1:
    ORA-04021: timeout occurred while waiting to lock object
    SCH_LOAD.DNS_LOAD_BASE_TABLES_CRDM
    ORA-04021: timeout occurred while waiting to lock object stringstringstringstringstring
    Cause: While waiting to lock a library object, a timeout is occurred.
    Action: Retry the operation later.

    Thanks Rob,
    Usually this package takes few minutes to re-compile and we have already crossed 2 to 3 hours.
    Could you please let me know what might be the probable reasons for this abnormal behaviour.
    we are able to find required changes using user_source view.
    Could you please let me know on how to kill the process and unlock the package.
    thanks in advance.

  • I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

    I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

    Follow this instruction exactly to the last line.  It worked on mine.
    Jolly Giant wrote:
    daduser wrote:
    "copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
     check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so 
     now try consolidating again.

  • Error when testing from Message mapping test tab

    Hi Experts,
    I am wondering that when i test the message in the MM test tab its giving error and target message is not generating. I am not testing end to end then why it is triggering communication channel?
    I can see that the 'RFC_Alert_Service_RFC_Receive' communication channel is in Red color RWB--> communication channel monitoring. I even even refreshed the cache and also activated the RFC channel but no use.
    Below are the error details:
    Error when testing message from test tab of mapping -->
    java.lang.RuntimeException: Exception during processing the payload.Problem when calling an adapter by using communication channel RFC_Alert_Service_RFC_Receiver (Party: , Service: RFC_Alert_Service, XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing
    Error in Communication channel monitoring -->
    Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
    Please help me how can i resolve this issue to successfully test the message in mapping-test tab.
    Regards,
    Suresh.

    > Error in Communication channel monitoring -->
    > Receiver channel 'RFC_Alert_Service_RFC_Receiver' for party '', service 'RFC_Alert_Service'
    > Error can not instantiate RfcPool caused by:
    > com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts.
    Unlock the user you are using in the RFC channel and provide the correct password in the channel configuration. Once the channel error is resolved you would be able to test the Mapping sucessfully...
    >>why it is triggering communication channel?
    You would be using RFC lookup in the mapping....
    ~SaNv...
    Edited by: Santhosh Kumar V on Jul 8, 2009 5:48 PM

  • Error when loading the callback component

    Hi friends
      Am getting this error.  Error when loading the callback component. Am working in Travel expense workflow which is 2 level based on condition. If its EG > 8 its one level and EG < 8 its 2 level. When the approver does the approval am changing the status from 3 to 4 at that time the pernr is getting locked. Next step itself mail step. But the workflow is throwing the error and mail its hanging in the mail step. I have try to restart the workflow but its not restarting.  Error when loading the callback component this error is showing in the lock pernr. Am not locking the pernr system locks the pernr by itslef and not unlocking the pernr. How to solve this issue.
    Regards
    vijay

    Hello,
    Check if OSS Note 854495 is applicable.
    regards
    Rick Bakker
    Hanabi Technology

Maybe you are looking for