Error when updating 0CUSTOMER Attributes

Dear Experts,
I'm trying to update the 0CUSTOMER Attributes.
The data is passed to the PSA with no errors, but when I process the DTP I'm having an error in one record.
The error is the following:
Diagnosis
    Data record 4103 & with the key '0000103940 &' is invalid in value 'G &
    E LOGISTICS INC# &' of the attribute/characteristic 0NAME &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
I've checked SDN but only found similar erros in the object 0MATERIAL but couldn't understand the resolution.
Could you give me a help?
Thanks in advance.
Best Regards,
Rui Romba

Hi,
Your psa data have wrong/bad data.
its have special characters(&,#). bw won't allow to load them to dso/cube.
So you need delete the your failed request from target and edit psa.
reload again to target.
Here is wrong one: Bold letters.
Data record 4103 & with the key '0000103940 &' is invalid in value 'G &
E LOGISTICS INC# &' of the attribute/characteristic 0NAME &.
Once you delete the red request from target, at PSA, keep filter on filed 0NAME and find the wrong entry.
edit it by manual and save it.relaod the data.
Use - RSKC for specical cases.
Thanks

Similar Messages

RPLDAP_EXTRACT - Error when updating the LDAP directory

I am connecting SAP IdM 7.0 to SAP HCM via VDS.
So far:
The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
I didn't see anything that makes sense in tables mentioned in the error message above.
I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
Any pointers in going forward?
Edited by: pasikuikka on Oct 20, 2009 11:01 AM

Hi Pasikuikka,
just a few questions:
Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
Hope this puts you on the right track.
Kind regards,
Achim Heinekamp

Error when updating Playbook OS version via Blackberry Desktop Manager

Greeting,
I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
I've attached the step by step screenshots for reference, where you can find here:
http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
Thanks,

BLock wrote:
Sorry I can not help you with your problem but perhaps you can help me.
Can you advise where I can find info on "disable the automatic update"?
just ignore the update if you dont want it on the playbook
for reloading the OS
First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
QUICKLY choose the Update option.
This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error when updating

I get an error when updating. The message states,
Adobe Photoshop Elements 12.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.5
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Do you know what causes this issue?

Please see- https://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html
This error code occurs when multiple instances of Updater are open. Please refer to following forum link for more details: http://forums.adobe.com/message/4913117#4913117#4913117
Thanks
Andaleeb

Error when updating! Help please!!

I've been having a problem with the artwork updating on my 5th iPod. I kept getting an error when updating in iTunes whenever I added artwork to songs. So I was told to go into iTunes and go under iPod options and UNCHECK the box to display the artwork on my iPod. Then click okay. Then, go back into it and CHECK the box TO display the artwork and I get an error; "..Unknown Error occurred (-50)". Same error. And yes I have pressed the center button on my iPod to scroll through the different things. And I have restarted the program and computer. Tried disconnecting hte iPod, closing the program, restarting computer, restarting iTunes and reconnecting iPod and every combination of the steps (I've done many searches on this subject here) and same result. I've tried other different things but it all ends up to this error. Can some one please help me
Windows XP Pro

Hi Melophage,
I managed to do a OS X Recovery Reboot by restarting my computer and holding down Command and 'R'. I reinstalled OS X, and now my computer is working again.
However I'm going to take my computer into the Genius bar for review.
I have a Macbook Pro from 2012 (with a 2.6 GHz Intel Core i7 Processor) and was attempting to update OS X (I think Version 10.8.5).
Many thanks for your message.

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." c

Received the error when updating to inDesign 2014 "Unable to extract to temp directory." Anyone have a fix for this?

Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes

R5034 Runtime error when updating ITunes help - deleted all iTunes/Apple programs and reinstalled ITunes
help please ?

solved problems and reinstalled - 4 hours wasted trying to fix iTunes ...
Apple could do better to inform users when updating and upgrading .....

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error when updating software (OS6) for BB9300

Hi,
Please help me, when I try updating the the OS of my BB9300 it says : there's an error when updating your software.
I want to update my OS to OS6.
PS, I use BB Desktop Software Manager.
Many Thanks! and Godbless!

Multiple posts of the same message:
http://supportforums.blackberry.com/t5/BlackBerry-Curve/can-upgrade-my-OS/m-p/3012574#nobanner
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error when updating to 4.2

My Ipod Touch is on ios 2.2.1 and always get error when updating to 4.2

I think you have a 1st Gen iPod Touch. You can only go up to iOS 2.2.1 OR you can purchased the iOS 3.1 firmware.
http://support.apple.com/kb/ht2052
Purchase the iOS 3.1 Software Update directly from the iTunes Store.
IF NOT, then try to get a better internet connection (if connect with Wi-Fi) or wait a while and try to reupdate again. If you have to make sure iTunes is up to date (iTunes 11.x)
Message was edited by: keeferaf

After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

Try downloading it with another browser.
If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

Error when updating HANA Live Authorization Assistant

Hi Guys,
I'm trying to use the HANA Live AAA component for the creation of HANA Roles and it works fine when trying to generate the roles but it throwing me an error when updating them. The error happens at the beginning when the plugin attempts to load the Users from ECC. The message is:
SAP DBTech JDBC: [1300]: fetch returns more than requested number of rows: [1300] "_SYS_BIC"."sap.hba.tools.auth.db/GetUsers": line 20 col 1 (at pos 1770): [1300] (range 3) fetch returns more than requested number of rows exception
Anyone has gone through this error before??
Thanks!
Cheers.

Ok Guys. No answer to this just yet.
We decided not to use the tool and build our security with HANA security functionalities. It takes a bit longer but It's more robust in the long run in terms of maintenance.
Cheers.
Christian.

Error when updating 0CUSTOMER Attributes

Similar Messages

Maybe you are looking for