Error when updating the firmware

I get this error after trying to install the new firmware ????????
this after the process of closing the tablet........
Tablet Xperia Z on stock 4.4.4
Galaxy S2 on 4.4.4
Solved!
Go to Solution.

PC Companion installed on my Win 7 machine detected the Xperia Z Tablet (312) asked if I wanted to update and started through the process.
I have tried it a number of different ways and always with the same result.
The update gets downloaded, the process starts and PC Companion says basically...  "Your tablet will be shut down during the update, don't touch it!"
The tablet shuts off, I hear the USB disconnect tone on my PC.  PC Companion continues for about 30 seconds and then displays this message.
"There is no software available for your phone"
It's sort of amusing that the same software that just informed me of an update and downloaded it is now telling me there is no update available!!!
I have changed USB ports, done a FULL reset of the Xperia Z including wiping all data.  It's absolutely wiped clean and booting 4.4.2.
Common Sony... did you test this process first?  I did searching on the forums and apparently this very same problem has been common on some of the Xperia's in the past.
This should be the simple part.

Similar Messages

  • RPLDAP_EXTRACT - Error when updating the LDAP directory

    I am connecting SAP IdM 7.0 to SAP HCM via VDS.
    So far:
    The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
    I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
    I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
    An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
    You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
    I didn't see anything that makes sense in tables mentioned in the error message above.
    I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
    Any pointers in going forward?
    Edited by: pasikuikka on Oct 20, 2009 11:01 AM

    Hi Pasikuikka,
    just a few questions:
    Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
    Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
    Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
    Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
    Hope this puts you on the right track.
    Kind regards,
    Achim Heinekamp

  • Need help - Error while updating the firmware of Muvo Slim using the recovery t

    Hi ,
    While I am trying to update my Muvo slim firmware using the recovery tool it throwd up an error. And from then onwards if I am trying to power it up it won't.
    If I again try to update the firmware, it throws up the error that "Unable to Write to Device: Device Time out".
    I am afraid that my Muvo slim got bricked. Can you please help me in recovering the same.
    PS: My PC OS is Windows XP.
    Thank & Regards
    ksraghava?

    On my XP system, the last time I wanted to reload the firmware, I had to remove all of my Creative software programs,?and then revert my Windows Media Player back to 0 and then use The Recovery Tool. It is a bit of a pain, but does seem to work when you are getting errors with the firmware download.
    luvmyrescuedogs
    Almost forgot. Make sure your player is fully charged or has a fresh battery before starting any firmware download.
    Message Edited by luvmyrescuedogs on 06-4-2008 :6 AM

  • Error while updating the firmware

    I have X4500 running solaris 10 OS with software version 5.10. The ILOM version is 1.1.1. I tried to update the firmware but I cannot do that because I am getting an error. This is how I setup everything and I get the error mentioned below.
    C H A P T E R 1 - Flash Upgrading Your Server to Software Release 1.2
    I referred to the above link to do so. But, I do not understand what is the tftpserver that I need to mention here. I get an error message saying gethostbyname() failed. I also setup tftp server on my solaris machine using the following link.
    A P P E N D I X C - Updating the Firmware
    Please, help me.

    ILOM <1.1.8 was pretty flaky. 1.0 was described to me by a Sun CSE as the worst piece of software they ever released. I beg to differ, having been forced to use YP and rpc.lockd in the past but I digress ...
    o) Are you sure that you're getting the right firmware image? You want the x4500-specific images here: http://www.sun.com/servers/x64/x4500/downloads.jsp Be careful not to mix up x4100/x4200, x4100m2/x4200m2, x4600, x4500, etc. files as they are different
    o) Do a "show /SYS/MB" before updating your firmware and stash the output. Updates from 1.x versions of ILOM have a way of wiping the system serial and part numbers. If you record that info first you can repair after the fact.
    o) Do a "reset /SP" to reset the service processor before attempting the update. 1.x versions of ILOM, especially <=1.1.1, seem to upgrade more reliably when they're freshly booted
    o) Be sure that /SYS is stopped before you update ILOM
    o) You don't specify what command you're using to try to update, but I suspect that you're trying something like
    load -source tftp://some.host.domain/file.ima
    given the gethostbyname error. Give it the ip address of the tftp server not the FQDN.

  • Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

    Hi,
    I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
    the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
    updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
    any help in this regard is highly appreciated
    Thanks,
    Santosh Sutar  

    Hi Satosh Sutar,
    Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
    From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
    And here is an article about updating apps for Office and menifest schema files in the project for your reference:
    How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • TS3694 How do I solve error 1015 when updating the firmware????

    Can some kind person please help me with this problem? I have the latest iTunes and I have now tried 4 times to update my phone and I get the same message everytime, Thanks

    You will get that message if you tried to downgrade the firmware. It is usually associated with jailbreaking, and if that is the case there is often no way to fix it.
    Try to force it into restore mode:
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
    Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    When the iPhone finally appears in iTunes, choose "restore from backup".

  • Error when Updating the posted AR Document

    Hi all
    When i try to update the due date in the Posted AR Document it gives me an error stating that "This entry already exists in ADO1 Table(ODBC)"...
    But i can update the same in the super user login... I thought it was an authorization problem... But the user updated few documents... for the rest he gets this error...
    Marikannan

    Hello Marikannan,
    Please run the checking query:
    Select  T0.docentry, T0.objtype, T1.docentry
    from ADO1 T0 Left join ADOC T1 on
    T0.Docentry = T1.docentry and T0.objtype = T1.objtype and
    T0.loginstanc = T1.loginstanc
    where  T1.docentry is null
    If there is any result from this query, I think you should create a support ticke and send it
    to the SAP Support Center.
    Regards
    Helen

  • Error when updating the Request again after deleting it .

    Hi
    Actually I deleted few requests(some red ,some green) to load the request in order in the ODS for each date. While  again updating the same requests from the PSA,
    I am getting this error in the monitor.
    "Deletion of M version from ODS terminated"
    What should i look for ?
    Please advise,
    Thanks and regards,
    Priya.
    Few lines from the monitor:#
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    Deletion (messages): Errors occurred
    Delete running: ODS ZCCD0003 , from 71504 to 71938
    Deletion of request 71938 from ODS ZCCD0003 successful
    Deletion of request 71938 from ODS ZCCD0003 successful
    Deletion of request 71938 from ODS ZCCD0003 successful
    You want to delete request 0000057118 , but it is already updated
    Deletion of request 71938 from ODS ZCCD0003 successful
    Deletion of request 71876 from ODS ZCCD0003 successful
    Deletion of request 71504 from ODS ZCCD0003 successful
    Deletion of M version from ODS ZCCD0003 completed successfully
    Delete running: ODS ZCCD0003 , from 71504 to 71876
    You want to delete request 0000057118 , but it is already updated
    No data request exists for request number 71876
    No data request exists for request number 71504
    No data request exists for request number 71,504
    <b><i>Deletion of M version from ODS terminated</i></b>
    Deletion of M version from ODS ZCCD0003 completed successfully
    Delete running: ODS ZCCD0003 , from 71504 to 71876
    You want to delete request 0000057118 , but it is already updated
    No data request exists for request number 71876
    No data request exists for request number 71504
    No data request exists for request number 71,504
    Deletion of M version from ODS terminated
    Deletion of M version from ODS ZCCD0003 completed successfully
    Delete running: ODS ZCCD0003 , from 71504 to 71876
    Deletion of request 71876 from ODS ZCCD0003 successful
    Deletion of request 71504 from ODS ZCCD0003 successful
    Error :Deletion of M version from ODS terminated

    Hi Roberto,
    I just want to know in SM50 how do we recognise that the process is running for what request.
    Everytime I see only this status:
    0  DIA  2004 Running  Yes SAPLTHFB  400  Disdgnl01.
    What does this report do? and how do we understand the
    details ......
    Can i have some link as well where I can get more information about the process overview.
    Thanks a lot for all your help,
    Priya.

  • E71 says "Update error" when updating the Mobile V...

    Hi to everybody.
    I must say mobile VPN client (IPsec) is a pain in the ***.  It's incredible how problematic is this software.  I'm trying to connect to my VPN server (Linux-based) using Openswan, and after trying for some months, I cannot connect it.
    I decided to update the client, and I tried to install the last version (mVPN 3.1 build 090519).  But, no matter what version I use, the answer is the same:
    UPDATE ERROR
    Please, help me with that. And if you know where can I addres the IPSec Openswan issues with this client, please, tell me... I don't have a clue in how to put this f***** client to work!!! 

    Hello Marikannan,
    Please run the checking query:
    Select  T0.docentry, T0.objtype, T1.docentry
    from ADO1 T0 Left join ADOC T1 on
    T0.Docentry = T1.docentry and T0.objtype = T1.objtype and
    T0.loginstanc = T1.loginstanc
    where  T1.docentry is null
    If there is any result from this query, I think you should create a support ticke and send it
    to the SAP Support Center.
    Regards
    Helen

  • Iphone 5s error when updating the latest version of ios.

    I'Ve updated to the 8.0 version and some apps did not open. Now I've updated the 8.0.2 version and the minute i accepted terms and conditions the screen went black with the apple. Till then it was ok for me. But then it started flahing to a blue screen. Its not respondindg to the update correctly. Since then its been like four hours and its still the same.

    Hi virgiinita,
    Thank you for using Apple Support Communities.
    From your post I understand that your iPhone will not boot up after updating the iOS version.  First, I'd like you to please try and reset the device.  If the issue persists, then you will need to put the device into recovery mode, and restore it to its factory settings.
    Turn your iOS device off and on (restart) and reset
    If you can't update or restore your iPhone, iPad, or iPod touch
    Take care,
    Alex H.

  • Javascript error when updating the jsf-impl.jar from 10.1.3.1 to 10.1.3.0

    Hiya,
    I have my application running on Jdeveloper 10.1.3.0. When I am upgrading the jsf-impl.jar file from 10.1.3.1 to my 10.1.3.0 , the application started giving javascript warning errors on every pages, although the functionality is working fine.
    Any suggestion or idea is welcome.
    Thanks in advance,
    Amitabh

    Two things.
    First I suppose you mean you are upgrading from 101.3.0 to 10.1.3.1 and not downgrading it? Secondly, most web browsers allow you to show what JavaScript error exactly is being given. That info might also help. And when it is being given.
    Jan Kettenis
    null

  • Error when updating ODS

    Hi,
      We got an error when updating ODS.
    The error message is "RSDRO_UPDATE_ODS".
    Its fetching all the records and its giving an error "when saving the aggregation information for ODS".
    We rectified the error.
    But how to fix it permenantly, what might be the reason for this error.
    Thanks in advance!!

    hI,
    I executed the program and there are no errors in the program and the program is active, but still we are often getting the error when updating the data in ODS.
    Please suggest me what might be the problem behind this....
    Thnaks in advance!!

  • 1602 and 1604 errors when updating to 1.1.3 firmware

    So like many people today, I tried to update my Touch's firmware to 1.1.3. Using iTunes 7.6, I downloaded the file, but then when it goes to update, it gets stuck on the "Preparing iPod for update" step and then comes back telling me that the iPod could not be updated, giving either a 1602 or 1604 error. I can restore back to the 1.1.2 firmware with no problems, but after multiple attempts, multiple reboots, multiple reinstalls of iTunes, and multiple forced restores, I still can't update the firmware to 1.1.3, getting the same error each time. A quick Google search reveals that I'm not the only one having this problem, so I hope a fix is worked out quickly. I guess I shouldn't be in much of a hurry, seeing as there appear to be a slew of other problems with the new application pack anyway.

    I had all of these problems, and I was able to fix them with the following process. Here is what I did:
    My setup:
    Apple Max OS 10.4.10, Mac G4, with 3rd party USB 2.0 card.
    1. Upgrade to iTunes 7.6 and Quicktime 7.4, Restart and repair permissions
    2. Purchase the iPod Touch Upgrade - It took two tries to purchase. I had to accept to two agreements, and then got an error. I purchased the upgrade again and got an instruction screen. iTunes appeared to download a very small file.
    3. Sync my touch (I still had not upgraded to firmware 1.1.3)
    4. The touch synced, but I had no new functions.
    5. I clicked upgrade, and downloaded the 165GB file.
    6. While the file was downloading I undocked my iPod touch and restarted it.
    7. When the download was complete, it gave me an unknown error because my iPod was not connected.
    8. I connected My iPod and tried to install the update. After several tries, I always got a 1602 error.
    9. I restarted my computer and did a hard restart of my ipod touch. This did not work, I still had 1602 errors.
    10. At this point, I chose to RESTORE my iPod Touch.
    11. After the restore, I chose not to restore any content, and just tested the firmware update. EVERYTHING worked great!
    12. I synced my iPod touch while I watched the keynote. 45 minutes later my sync was complete and 14 Gig of content was restored. The new functions are great. I have already read my .Mac email.
    Message was edited by: gotabmac

  • I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

    I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

    Good morning
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3125
    Hope this helps
    Cheres

Maybe you are looking for