Error when upgrading to exchange 2013 SP1
* First, I install Exchange 2013 SP1 on my server, so step 14 of 18 to 100% then alert error:
=======================
Error:
The following error was generated when "$error.Clear();
$name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
$dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
$dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
if( $dismbx -ne $null)
$srvname = $dismbx.ServerName;
if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
$mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
if( $mountedMdb -eq $null )
Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
mount-database $dismbx.Database;
$mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
if( $mountedMdb -ne $null )
$dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
$dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
if( $dmRoleGroup -ne $null )
trap [Exception]
Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
continue;
Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
" was run: "Failed to mount database "Mailbox Database 0487331505". Error: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing:
Unable to mount database. (hr=0x80004005, ec=-543)
Diagnostic context:
Lid: 65256
Lid: 10722 StoreEc: 0xFFFFFDE1
Lid: 1494 ---- Remote Context Beg ----
Lid: 45120 dwParam: 0x667F9F
Lid: 57728 dwParam: 0x668155
Lid: 46144 dwParam: 0x66851E
Lid: 34880 dwParam: 0x66851E
Lid: 34760 StoreEc: 0xFFFFFDE1
Lid: 41344 Guid: 581e05de-0b68-45e0-af85-c1d96eb3e939
Lid: 35200 dwParam: 0x548
Lid: 46144 dwParam: 0x66885A
Lid: 34880 dwParam: 0x66885A
Lid: 56264 StoreEc: 0x1388
Lid: 46280 StoreEc: 0xFFFFFDE1
Lid: 1750 ---- Remote Context End ----
Lid: 1047 StoreEc: 0xFFFFFDE1 [Database: Mailbox Database 0487331505, Server: ex2013.dothanhauto.com]".
========================
* After I run install Exchange 2013 SP1 again, so go to step 5 of 9 then alert error.
* Now, my Exchange 2013 not run. So bad. Please help me fix it! Thank you so much!
* Thank you, Amit Tank, i passed step 4 of 9, but to step 5 of 9 then alert error:
Error:
The following error was generated when "$error.Clear();
$name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
$dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
$dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
if( $dismbx -ne $null)
$srvname = $dismbx.ServerName;
if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
$mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
if( $mountedMdb -eq $null )
Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
mount-database $dismbx.Database;
$mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
if( $mountedMdb -ne $null )
$dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
$dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
if( $dmRoleGroup -ne $null )
trap [Exception]
Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
continue;
Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
" was run: "Failed to mount database "Mailbox Database 0487331505". Error: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing:
Unable to mount database. (hr=0x80004005, ec=-543)
Diagnostic context:
Lid: 65256
Lid: 10722 StoreEc: 0xFFFFFDE1
Lid: 1494 ---- Remote Context Beg ----
Lid: 45120 dwParam: 0x35AF49
Lid: 57728 dwParam: 0x35B062
Lid: 46144 dwParam: 0x35B3EC
Lid: 34880 dwParam: 0x35B3EC
Lid: 34760 StoreEc: 0xFFFFFDE1
Lid: 41344 Guid: 581e05de-0b68-45e0-af85-c1d96eb3e939
Lid: 35200 dwParam: 0x1BA0
Lid: 46144 dwParam: 0x35B757
Lid: 34880 dwParam: 0x35B757
Lid: 56264 StoreEc: 0x1388
Lid: 46280 StoreEc: 0xFFFFFDE1
Lid: 1750 ---- Remote Context End ----
Lid: 1047 StoreEc: 0xFFFFFDE1 [Database: Mailbox Database 0487331505, Server: ex2013.dothanhauto.com]".
* Please can you help me?! Thank you so much.
Similar Messages
-
BSOD after upgrading to exchange 2013 SP1
Hi,
I Have 4 servers, x2 Mailbox and x2 CAS, all with 2008 r2 OS, Mailboxes with DAG. Problem started after I upgraded all servers from Exchange 2013 CU3 to Ex13 SP1. All Servers are in Vmware, same hardware.
All servers getting BSOD, error is same as some other posts in Internet about:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8007ab4890, Terminating object
Arg3: fffffa8007ab4b70, Process image file name
Arg4: fffff800019de7b0, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa8007ab4890
IMAGE_NAME: wininit.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: wininit
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: MSExchangeHMWo
BUGCHECK_STR: 0xF4_MSExchangeHMWo
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff80001a67ab2 to fffff800016d9bc0
LOGS:
RecoveryActionLogs: ForceReboot-ServerName -ActiveDirectoryConnectivityServerReboot: Throttling rejected the operation
RecoveryActionLogs: ForceReboot-ServerName -ActiveDirectoryConnectivityConfigDCServerReboot: Throttling
rejected the operation
Recovery Action Failed. (ActionId=RestartService, ResourceName=ServerName.contoso.com, Requester=ActiveDirectoryConnectivityRestart,
InstanceId=140408.062707.65292.001, ActualStartTime=2014-04-08T15:27:07.6529270Z, ActualEndTime=2014-04-08T15:27:07.7777262Z, ErrorMessage=Service ServerName.contoso.com was not found on computer '.'.)
when Server restarts, logs show
Bugcheck action reported by server 'ServerName' initiated by responder 'ActiveDirectoryConnectivityServerReboot'
Recovery Action Started. (ActionId=ForceReboot, ResourceName=ServerName, Requester=ActiveDirectoryConnectivityServerReboot, InstanceId=140408.063307.93261.004, ExpectedToFinishAt=2014-04-08T15:38:07.9326175Z
Recovery Action Succeeded. (ActionId=ForceReboot, ResourceName=ServerName, Requester=ActiveDirectoryConnectivityServerReboot, InstanceId=140408.063307.93261.004, ActualStartTime=2014-04-08T15:33:07.9326175Z, ActualEndTime=2014-04-08T15:35:07.0828500Z)
I found that it could restart like many times in a day, but
Throttling does not let it, just one restart per day.
I already spent four days trying to find problem but no luck.
Try'ed to add override
Add-GlobalMonitoringOverride
-Identity Exchange\ActiveDirectoryConnectivityConfigDCServerReboot -ItemType Responder -PropertyName Enabled -PropertyValue 0 -Duration 60.00:00:00
but
after
(Get-WinEvent
-LogName Microsoft-Exchange-ActiveMonitoring/responderdefinition | % {[XML]$_.toXml()}).event.userData.eventXml | ?{$_.Name -like “ActiveDirectoryConnectivityConfigDCServerReboot"} | ft name,enabled
still shows propertyValue 1, and servers are restarting no matter what, I just dont want to disable HealtManager
Service.
Try'ed to recreate all performance counters, did'nt worked
Try'ed to create prefered domain controller, did'nt worked
Try'ed to play with healthSet 'AD', but there is almost no information about it in TechNet, so I just looked which services are unhealthy, sometimes it shows ActiveDirectoryConnectivityServer
or ActiveDirectoryConnectivityConfigDCServer as unhealthy, but after few minutes it goes to
healthy, problem that Exchange could already restart the server
mainly reason I think is:
The AD Health Set has detected a problem with Server.contoso.com at 2014.04.09 06:33:11. The Health Manager is reporting that ActiveDirectoryConnectivityProbe/Server.contoso.com
Failed with Error message: Search took 1518 ms. Threshold 800 ms. Attempts to auto-recover from this condition have failed and requires Administrator attention. Exception Details: System.Exception: Search took 1518 ms. Threshold 800 ms
I really need some new ideas...
EDIT: Exchange 2013 sp1 works perfectly in test lab, there are cloned machines from production, the only difference is DomainController, there is just one (server), no replications, and no subdomains (production domain have subdomain).
Running DCDiag shows no errorsHello Everyone,
We have 2 CAS and 4 Mailbox server that were installed from SP1 and seeing the same issue. This is a clean install still with no mailboxes migrated over as of yet. Opened a case with MS. also ran:
Add-GlobalMonitoringOverride
-Identity Exchange\ActiveDirectoryConnectivityConfigDCServerReboot -ItemType Responder -PropertyName Enabled -PropertyValue 0 -Duration 60.00:00:00
Waiting
for MS to get back and to see how this workaround does. Seems like the original issue was not resolved completely?
Will
post back when we get an update. Changing the DirectoryActiveMonitoringContext.xml and the above workaround do not seem suitable for us. We would like to see a complete resolution for this.
Good
luck! -
Upgrade of Exchange 2013 SP1 Reboots Server During Step 3 "Copy Exchange Files"
While upgrading Exchange 2013 to the new SP1, the installer reaches step 3, "Copying Exchange Files", sits at 0% for 10-15 minutes and then when without warning the machine will reboot.
The last couple logs from ExchangeSetup.log are:
[02/28/2014 00:16:58.0878] [1] Installing MSI package 'C:\Exchange2013SP1\exchangeserver.msi'.
[02/28/2014 00:16:58.0878] [1] No updates directory was specified for the msi installation.
[02/28/2014 00:16:58.0878] [1] Installing a new product. Package: C:\Exchange2013SP1\exchangeserver.msi. Property values: DISABLEERRORREPORTING=1 PRODUCTLANGUAGELCID=1033 DEFAULTLANGUAGENAME=ENU DEFAULTLANGUAGELCID=1033 INSTALLCOMMENT="Installed language
for this product: English (United States)" REBOOT=ReallySuppress TARGETDIR="C:\Program Files\Microsoft\Exchange Server\V15" ADDLOCAL=Bridgehead,FrontendTransport,ClientAccess,UnifiedMessaging,Mailbox,AdminTools,Cafe,AdminToolsNonGatewayHi,
Where did you download the install package?
Please download the Exchange 2013 SP1 from the following link and install again:
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
Thanks.
Niko Cheng
TechNet Community Support -
Hi all, I have noticed an issue with OWA when database(s) are failed over between DAG members. The environments in question (issue can be reproduced in separate implementations of 2013 SP1 all-role servers) are 2 or more DAG members within the same
AD site/subnet. These are also fresh implementations with SP1 and not upgraded. Exchange servers are load balanced via Netscaler.
So to the issue - OWA users experience the below "..MailboxInSiteFailoverException" message when the database copy is activated. Exchange does not immediately proxy the requests to the active database. You can wait several minutes and
the issue is resolved by refreshing the browser or if you recycle the MSExchangeOWAAppPool on both DAG members, the issue is resolved immediately (OWA session re-established on refresh).
Testing so far involved opening multiple OWA sessions and activating a database copy. At that point, upon refresh of the browser the below error is shown (in all test browsers/sessions below) where I would expect any DAG member to be able to proxy
the client request to the active database server immediately (and not after several minutes).
https://netscaler_LB/owa
https://ex2013server-1/owa
https://ex2013server-2/owaHi Simon, I have tested with no firewall on the exchange servers and on client machines within the same subnet as the servers. All with the same results.
I can see many ASP.NET 4.0.30319.0 Event ID 1309 logs similar to this and other threads (http://social.technet.microsoft.com/Forums/windowsserver/en-US/c938dda0-b3bc-4544-851e-f27b503cf4ed/exchange-2013-event-id-1309-source-aspnet-40303190).
IIS logs show similar monitoring mailbox issues but I am still currently looking through the logs. Thanks for your input.
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 0 0 13
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 0 0 13
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 1 2148074254 0
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 1 2148074254 0
2014-03-30 00:01:23 ::1 POST /owa/proxylogon.owa &ex=UE:Microsoft.Exchange.Data.Storage.IllegalCrossServerConnectionException 444 DOMAIN\SM_3ce57cd622aa4655a ::1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST)
- 302 0 0 47
2014-03-30 00:01:23 ::1 POST /owa/proxylogon.owa &ex=UE:Microsoft.Exchange.Data.Storage.IllegalCrossServerConnectionException 444 DOMAIN\SM_2891f9d41af2422e8 ::1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST)
- 302 0 0 47 -
Hi,
I've upgrade two of my customers to Exchange 2013.
On of them was coming from 2007, and the other was already running 2010.
Migration from both of the servers went good.
However with the customer which upgraded from 2010 to 2013 i'm experiencing strange OWA behavior:
When I login to OWA on https://owa.contoso.com/owa, and input my credentials and click sign in: I receive this error:
404
can't find page :-(
The page you're looking for couldn't be found on the server.
X-FEServer: JVBMAIL01
Date: 11-6-2014 11:54:48
Fewer details..
-> Refresh the page
In the addressbar, the following URL is displayed: https://owa.contoso.com/owa/auth/errorFE.aspx?httpCode=404
But... when I click: "Refresh the page" of just hit F5, the login proceeds, and my OWA is displayed and working fine.
This behavior only happens with my customer which was upgraded from 2010 to 2013.
The customer which i've upgraded from 2007 to 2013 doesn't experience this problem.
I've matched the IIS settings and redirect/ssl options on both servers. They are the same.
I've tried other users and i've experienced that on one user, the error message didn't appear.
When I try to delete the Exchange atributes from the user, (after exporting the mail to a PST file) and re-add the Exchange attributes, the message is gone. This isn't a solotuion however, since i've got 166 users, and about 150 of them, get the error message.
New users don't get the error.
Anybody got any clues?Hi,
From your description, I would like to verify the following thing for troubleshooting:
Please make sure that the authentication is set to Basic Authentication and Forms Authentication is disabled on OWA and ECP virtual directly in IIS. After the above settings, please restart IIS by running IISReset /noforce command.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
We recently upgraded to Exchange 2013 SP1 with a client user-base of Office 2010 Professional Plus / Outlook 2010 SP3.
All Unread Email favorites folders show both Unread and Read emails, just like the inbox. Removal of the folder and recreating yields the same results, as does creating a custom folder. However, in Outlook 2013 there is no problem.
Is there a patch or hot fix for this issue? Or does anyone know how to fix this issue so that the UNREAD EMAILS SHOW UP IN THE UNREAD FOLDER AND NOT INCLUDE THE READ EMAILS?
Thank you!
Kim Parker-Polito / Newhall LandGo down to Search Folders
- Right click on Search Folders and create New Search Folder leave default "Unread Mail1" and click OK
- Right click on the new “Unread Mail1” folder and choose “Customize this search folder”
- Click on Browse
- Select the checkbox for “Search subfolders”
- Press OK and OK again.
- Right click on old "Unread Mail" Folder and delete. -
I have a new Exchange 2013 server with plans to migrate from my current Exchange 2007 Server.
I installed Exchange 2013 SP1 and the only errors I saw in the event log seemed to be long standing known issues that did not indicate an actual problem (based on what I read online).
I updated to CU7 and now lots of errors have appeared (although the old ones seem to have been fixed so I have that going for me).
Currently the Exchange 2013 server is not in use and clients are still hitting the 2007 server.
Issue 1)
After each reboot I get a Kernel-EventTracing 2 error. I cannot find anything on this on the internet so I have no idea what it is.
Session "FastDocTracingSession" failed to start with the following error: 0xC0000035
I did read other accounts of this error with a different name in the quotes but still can’t tell what this is or where it is coming from.
Issue 2)
I am still getting 5 MSExchange Common 106 errors even after reregistering all of the perf counters per this page:
https://support.microsoft.com/kb/2870416?wa=wsignin1.0
One of the perf counters fails to register using the script from the link above.
66 C:\Program Files\Microsoft\Exchange Server\V15\Setup\Perf\InfoWorkerMultiMailboxSearchPerformanceCounters.xml
New-PerfCounters : The performance counter definition file is invalid.
At C:\Users\administrator.<my domain>\Downloads\script\ReloadPerfCounters.ps1:19 char:4
+ New-PerfCounters -DefinitionFileName $f
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [New-PerfCounters], TaskException
+ FullyQualifiedErrorId : [Server=VALIS,RequestId=71b6bcde-d73e-4c14-9a32-03f06e3b2607,TimeStamp=12/18/2014 10:09:
12 PM] [FailureCategory=Cmdlet-TaskException] 33EBD286,Microsoft.Exchange.Management.Tasks.NewPerfCounters
But that one seems unrelated to the ones that still throw errors.
Three of the remaining five errors are (the forum is removing my spacing between the error text so it looks like a wall of text - sorry):
Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The
exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown
is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException:
The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 7384 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Issue 3)
I appear to have some issues related to the healthmailboxes.
I get MSExchangeTransport 1025 errors for multiple healthmailboxes.
SMTP rejected a (P1) mail from 'HealthMailbox23b10b91745648819139ee691dc97eb6@<my domain>.local' with 'Client Proxy <my server>' connector and the user authenticated as 'HealthMailbox23b10b91745648819139ee691dc97eb6'. The Active Directory
lookup for the sender address returned validation errors. Microsoft.Exchange.Data.ProviderError
I reran setup /prepareAD to try and remedy this but I am still getting some.
Issue 4)
I am getting an MSExchange RBAC 74 error.
(Process w3wp.exe, PID 984) Connection leak detected for key <my domain>.local/Admins/Administrator in Microsoft.Exchange.Configuration.Authorization.WSManBudgetManager class. Leaked Value 1.
Issue 5)
I am getting MSExchange Assistants 9042 warnings on both databases.
Service MSExchangeMailboxAssistants. Probe Time Based Assistant for database Database02 (c83dbd91-7cc4-4412-912e-1b87ca6eb0ab) is exiting a work cycle. No mailboxes were successfully processed. 2 mailboxes were skipped due to errors. 0 mailboxes were
skipped due to failure to open a store session. 0 mailboxes were retried. There are 0 mailboxes in this database remaining to be processed.
Some research suggested this may be related to deleted mailboxes however I have never had any actual user mailboxes on this server.
If they are healthmailboxes or arbitration mailboxes that might make sense but I am unsure of what to do on this.
Issue 6)
At boot I am getting an MSExchange ActiveSync warning 1033
The setting SupportedIPMTypes in the Web.Config file was missing.
Using default value of System.Collections.Generic.List`1[System.String].
I don't know why but this forum is removing some of my spacing that would make parts of this easier to read.Hi Eric
Yes I have uninstalled and reinstalled Exchange 2013 CU7 for the 3<sup>rd</sup> time.
I realize you said one issue per forum thread but since I already started this thread with many issues I will at least post what I have discovered on them in case someone finds their way here from a web search.
I have an existing Exchange 2007 server in the environment so I am unable to create email address policies that are defined by “recipient container”.
If I try and do so I get “You can't specify the recipient container because legacy servers are detected.”
So I cannot create a normal email address policy and restrict it to an OU without resorting to some fancy filtering.
Instead what I have done is use PS to modify extensionAttribute1 (otherwise known as Custom Attribute 1 to exchange) for all of my users.
I then applied an address policy to them and gave it the highest priority.
Then I set a default email address policy for the entire organization.
After reinstalling Exchange all of my system mailboxes were created with the internal domain name.
So issue number 3 above has not come up.
For issue number one above I have created a new thread:
https://social.technet.microsoft.com/Forums/office/en-US/7eb12b89-ae9b-46b2-bd34-e50cd52a4c15/microsoftwindowskerneleventtracing-error-2-happens-twice-at-boot-ex2013cu7?forum=exchangesvrdeploy
For issue number four I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/2343730c-7303-4067-ae1a-b106cffc3583/exchange-error-id-74-connection-leak-detected-for-key?forum=exchangesvradmin
Issue number Five I have managed to recreate and get rid of in more than one way.
If I create a new database in ECP and set the database and log paths where I want, then this error will appear.
If I create the database in the default location and then use EMS to move it and set the log path, then the error will not appear.
The error will also appear (along with other errors) if I delete the health mailboxes and let them get recreated by restarting the server or the Health Manager service.
If I then go and set the retention period for deleted mailboxes to 0 days and wait a little while, these will all go away.
So my off hand guess is that these are caused by orphaned system mailboxes.
For issue number six I have posted to this existing thread where there is so far no resolution:
https://social.technet.microsoft.com/Forums/exchange/en-US/dff62411-fad8-4d0c-9bdb-037374644845/event-1033-msexchangeactivesync-warning?forum=exchangesvrmobility
So for the remainder of this thread we can try and tackle issue number two which is the perf counters.
The exact same 5 perf counter were coming up and this had been true each time I have uninstalled and reinstalled Exchange 2013CU7.
Actually to be more accurate a LOT of perf counter errors come up after the initial install, but reloading the perf counters using the script I posted above reduces it to the same five.
Using all of your suggestions so far has not removed these 5 remaining errors either. Since there is no discernible impact other than these errors at boot I am not seriously bothered by them but as will all event log errors, I would prefer
to make them go away if possible. -
Here is the scenario:
Legacy Host: Windows 2008 R2
Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster). (copy VM files to new 2012 R2host) Everything works fine.
Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
Services upgrade.
Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
upgrade.
Thanks
Gerhard Waterkamp ACSLA Inc.Hi,
Could you try use the following method to fix this issue first?
1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
http://support.microsoft.com/kb/947821/en-us
2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
%SYSTEMROOT%\Logs\CBS\
3. Please paste the checksur.log here for analysis.
If there is no error found, please try the following step.
==================================
2. Use Fix it tool to reset the Windows Update components.
1. Open the following link.
http://support.microsoft.com/kb/971058/en-nz
2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
3. Click “Run Now” to reset the Windows Update components.
Note: We can reset the Windows Updates manually by following the steps in the KB above.
3. Use the System File Checker tool to repair missing or corrupted system files
1. Open the command promote with Administrators.
2. At the command prompt, type the following command, and then press ENTER:
sfc /scannow
Any errors are found in the steps above, please let me know.
Hope this helpful.
Best Regards,
Jason Zeng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Exchange 2013 SP1 Installation Errors I Cannot Resolve
Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Exchange 2013 SP1 | Another HTTP 500.0.0 Error
Help!
We are in the middle of migrating from Exchange 2010 SP3 to Exchange 2013 SP1 and we are being plagued with HTTP 500 errors on every Exchange 2013 server now.
I have two Client Access servers installed (EXCHFE01 & EXCHFE02) and one backend mailbox server (EXCHMB03) with the Client Access role also installed (for troubleshooting purposes). Once I get everything working I'll install two backend 2013 servers
with the mailbox role only for production (load-balanced, clustered, etc). I still have two Exchange 2010 mailbox servers left since one has a single large mailbox left on it and the other hosts public folders. I'll get to migrating those later. All Exchange
2013 servers are running Windows Server 2012. All are on the same LAN and no firewalls are between them.
On all three 2013 servers (EXCHFE01, EXCHFE02, EXCHMB03) I'm getting the dreaded HTTP 500 error whether I try to get to OWA or ECP. This did work at one point where I could at least login to the mailbox server (EXCHMB03) and migrate all my mailboxes over
to it. Sometime this morning after the two Client Access servers were installed the mailbox server stopped working (HTTP 500 errors). This is very frustrating because I can't even login to a console to manage Exchange from any server at this point.
Both Client Access servers aren't really showing anything of value in the event logs or the IIS logs. The mailbox server (EXCHMB03) does show the following event 3002:
Protocol /Microsoft-Server-ActiveSync failed to process request from identity NT AUTHORITY\SYSTEM. Exception: Microsoft.Exchange.Security.Authentication.BackendRehydrationException: Rehydration failed. Reason: Source server 'NT AUTHORITY\SYSTEM' does not have token serialization permission.
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.ProcessRequest(HttpContext httpContext)
at Microsoft.Exchange.Security.Authentication.BackendRehydrationModule.OnAuthenticateRequest(Object source, EventArgs args).
...and I get the following when I run the Exchange Management Shell tool on the same mailbox server (along with lots of other red HTML text):
More Information:
This error means that there was a problem while processing the request. The request was received by the Web server, but during processing a fatal error occurred, causing the 500 error.
The Client Access servers show the following errors:
Performance counter updating error. Counter name is Location cache update time, category name is MSExchange Active Manager Client. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)
Last worker process info : System.ArgumentException: Process with an Id of 4040 is not running.
at System.Diagnostics.Process.GetProcessById(Int32 processId)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
Processes running while Performance counter failed to update:
888 svchost
264 smss
532 conhost
2576 Microsoft.Exchange.UM.CallRouter
1596 WMSvc
3932 dllhost
4020 svchost
2308 dwm
5060 taskhostex
844 svchost
1972 Microsoft.Exchange.Directory.TopologyService
1228 inetinfo
1316 vmtoolsd
3896 svchost
780 svchost
1580 rundll32
1668 mqsvc
816 dwm
3840 slui
3532 rdpclip
3980 WmiPrvSE
4200 SppExtComObj
4288 winlogon
2140 SMSvcHost
676 svchost
1564 svchost
1296 Microsoft.Exchange.Diagnostics.Service
1472 Microsoft.Exchange.ServiceHost
1204 svchost
1292 ServerManagerLauncher
488 winlogon
664 svchost
572 lsass
3236 dllhost
2972 WmiPrvSE
4484 w3wp
388 csrss
1600 rundll32
564 services
1260 msdtc
5032 sppsvc
1448 MSExchangeHMHost
824 LogonUI
4204 VSSVC
2524 userinit
2700 MSExchangeFrontendTransport
1708 SMSvcHost
728 svchost
460 wininit
904 svchost
992 svchost
4996 TSTheme
4240 slui
4904 taskhost
452 csrss
4340 csrss
4 System
1164 spoolsv
1988 slClient
2760 MSExchangeHMWorker
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Active Manager Client : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange active manager client. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
... and...
A transient failure has occurred. The problem may resolve itself. Diagnostic information:
Microsoft.Exchange.Data.DataSourceOperationException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed. The remote server returned an error: (503) Server Unavailable. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
--- End of inner exception stack trace ---
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalFindFolders(IEnumerable`1 parentFolderIds, SearchFilter searchFilter, FolderView view, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindFolders(FolderId parentFolderId, SearchFilter searchFilter, FolderView view)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.GetOrCreateFolderCore(String folderName, FolderId parentFolder, Func`1 creator)
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.GetDefaultFolder()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<>c__DisplayClass1b`1.<InternalFindPaged>b__13()
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.InvokeServiceCall[T](Func`1 callback)
at Microsoft.Exchange.Data.Storage.Management.EwsStoreDataProvider.<InternalFindPaged>d__21`1.MoveNext()
at Microsoft.Exchange.Data.Storage.Management.AsyncOperationNotificationDataProvider.<GetNotificationDetails>d__4.MoveNext()
at System.Linq.Enumerable.WhereEnumerableIterator`1.MoveNext()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.RemoveAllNotification()
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.UpdateDataInMbx(List`1 certificates)
at Microsoft.Exchange.Servicelets.CertificateNotificationServicelet.Work()
I've tried all sorts of recommended fixes but none have worked so far:
ADSIEdit and remove msExchCanaryData0 data
Reinstall Exchange multiple times
Rebooted multiple times
This article: http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
Rebooted DCs multiple times (no exchange servers are DCs)
I'm sure I've left out a few troubleshooting steps since I've been working at this for two days. Can anybody offer any advice? I'm at my wits end here...Hi,
Please check whether the mail.mydomain.com is pointed to your Exchange 2010 or Exchange 2013. Please run the following command to check your OWA virtual directores and ECP virtual directories:
Get-OwaVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
Get-EcpVirtualDirectory -ShowMailboxVirtualDirectories | Select Identity,name,Internalurl,ExternalUrl,*auth*
In IIS manager > Default Web Site, please make sure Anonymous Authentication is Enabled in Authentication. Confirm that "Require SSL" is checked on the SSL Settings of the default web site.
Regards,
Winnie Liang
TechNet Community Support -
Exchange 2013 SP1 RPC 404 Error Page Not Found
Anyone got any ideas why on my Exchange 2013 SP1 server I am getting a 404 error when trying to access the RPC URL?
I had a look in the CAS RPC logs and see the following HTTP POST events:
<snip>
2014-06-19T15:33:00.558Z,EX-CAS1,RpcHttp,"S:Stage=BeginRequest;S:OutlookSessionId=""{17FD197A-098A-4339-82E9-A480F6DD70F7}"";S:AuthType=Basic;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.internal.local:6004;S:RequestId=0acc9487-bf8f-4600-ae04-edf2ef00a90b;S:ClientIp=192.168.0.17"
2014-06-19T15:33:00.558Z,EX-CAS1,RpcHttp,"S:Stage=PostAuthorizeRequest;S:UserName=INTERNAL\SVC_BMA;S:OutlookSessionId=""{17FD197A-098A-4339-82E9-A480F6DD70F7}"";S:AuthType=Basic;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.internal.local:6004;S:RequestId=0acc9487-bf8f-4600-ae04-edf2ef00a90b;S:ClientIp=192.168.0.17"
2014-06-19T15:33:00.574Z,EX-CAS1,RpcHttp,"S:Stage=EndRequest;S:UserName=INTERNAL\SVC_BMA;S:OutlookSessionId=""{17FD197A-098A-4339-82E9-A480F6DD70F7}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.internal.local:6004;S:RequestId=0acc9487-bf8f-4600-ae04-edf2ef00a90b;S:ClientIp=192.168.0.17"
</snip>
This works fine in Exchange 2010 SP3 so I am wondering if maybe Microsoft have removed the /rpc url functionality in Exchange 2013 SP1?Hi JRA,
Is it possible to provide more info for your issue?
You receive as you said HTTP 404 error, can you provide the specific HTTP 404 error message?
For example:
HTTP/1.0 404 File Not Found
HTTP/1.0 404 Not Found
HTTP/1.0 404 Object Not Found
HTTP/1.0 404 Page Cannot Be Found
The page cannot be found. The page you are looking for might have been removed, had its name changed, or is temporarily unavailable
Also a screenshot will be very helpful
Regards,
CF -
Error while adding member to the dag in exchange 2013 sp1
I have Windows Server 2012 Std Edition with Exchange 2013 SP1 and get the following error while adding member to the dag either i do it using EAC or the powershell
Senior Technical Consultant, MDS ComputersWhen running set-databaseavailabilitygroup Exchange-dag without parameters, it crashes again:
[PS] C:\Windows\system32>Set-DatabaseAvailabilityGroup exchange-dag
WARNING: An unexpected error has occurred and a Watson dump is being generated: Some or all identity references could not be translated. Some or all identity references could not be translated.
+ CategoryInfo : NotSpecified: (:) [Set-DatabaseAvailabilityGroup], IdentityNotMappedException
+ FullyQualifiedErrorId : System.Security.Principal.IdentityNotMappedException,Microsoft.Exchange.Management.Syste
mConfigurationTasks.SetDatabaseAvailabilityGroup
+ PSComputerName : <server>
Also, this is logged in the eventlog:
Watson report about to be sent for process id: 7424, with parameters: E12, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangePowerShellAppPool, M.Exchange.Management, M.E.M.C.FileShareWitness.Create, S.S.Principal.IdentityNotMappedException, 3e5c, 15.00.0847.031.
ErrorReportingEnabled: True
Definitely looks like a problem creating the filewitness share.
Frank. -
Installing Exchange 2013 SP1 - Errors MSExchange ADAccess & MSExchange Common
The topology first:
AD-server + Exchange-server
What I am trying to do is just install a full version of Exchange 2013 sp1.
But the problem is that install wizard freezes on the "initializing setup" page. Also eventviewer gives 2 different error messages, MSExchange ADAccess & MSExchange Common.
MSExchange ADAccess:
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
2964
Get Servers for mydomain.com
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:01.9984949. TCP error code 10061: No connection could be made because
the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
MSExchange Common:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
1044 VSSVC
1064 spoolsv
4032 notepad
1416 svchost
700 dwm
3100 SMSvcHost
3616 msdtc
2564 csrss
336 csrss
424 winlogon
244 smss
688 LogonUI
2556 Taskmgr
596 svchost
1124 inetinfo
1920 svchost
1652 SMSvcHost
1400 svchost
2916 taskhostex
492 lsass
2688 dwm
396 wininit
484 services
1104 svchost
388 csrss
384 svchost
1896 svchost
3052 svchost
744 svchost
1180 mmc
3404 conhost
1800 explorer
3668 Setup
552 svchost
712 svchost
2864 svchost
2964 ExSetup
2948 rdpclip
2592 winlogon
900 svchost
808 svchost
4 System
1164 mqsvc
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange
activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message tableI solved this problem or at least managed to get a workaround for it.
I tried to install Exchange using rdp connection and the installation media was mapped on my local computer. After I copied it to server itself, everything started to work and now I am able to send emails. -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
HTTP 500 ERROR AFTER EXCHANGE 2013 SP1 INSTALL
Help after exchange 2013 sp1 new install unable to get to the ECP or OWA page with HTTP 500 error in IE the install went ok but not sure what can be causing the error any help would be appriciated.
EXCHANGE 2013--SP1 on WIN2K12--R2 Standard
TY
M4326See the following:
http://social.technet.microsoft.com/Forums/exchange/en-US/08d3777c-dc03-4411-8c87-7db37d2f406a/exchange-2013-owa-login-error-http-500?forum=exchangesvrclients
CK
Maybe you are looking for
-
Purchase order -- release strategy
Dear Friends, I have a requirement for Purchase order Release. The problem area is in purchase order ... there will be 2 Relase approvals 01 Mr. Abcd 02 Mr. Xyz After level 1 approval and before level 2 approval ... i want to do some actions.. the
-
ISight and External Firewire Hardrives
After installing my external firewire hardrive (one of two ports), my iSight seems to compete with the firewire ports and won't function. It just shows still frames, like an old film movie that got stuck between frames. When I turn the hardrive off,
-
Hello, I have an old imac, that is running OS 10.6.5; As of today I cannot get it to unmount any disks: USB drives CD's External hard drives (Both USB and Firewire) I have tried to repair permissions and repair the disk (Disk Utilities) both cases gi
-
Assembling ESS component fails in NWDI.
Hello Experts, Did any one see this error before? We have checked in all our changes and trying to assemble ESS component. Now While assembling I finished with errors. Can any suggest waht we need to do? Do I have to reimport SCA file. But, does the
-
ISync Application Quits Unexpectedly
OSX 10.4.6 PBG4 1.67 1.5 Gigs iSync 2.2 Palm Desktop 4.2.1 Palm T/X Entourage is installed and syncs okay... ...but I want to switch to iCal When attempting to enable Palm Syncing in iSync the program returns an error, "The application iSync quit une