Error when Uploading Items on a Delta Run

Hi,
I tried to upload new items with the "Force initial transport" unticked and I got the following Log:
06/18/2007 10:50:35 (UTC+8): Package 0001 received and saved
06/18/2007 10:50:36 (UTC+8): processing of package 0001 started
06/18/2007 10:50:39 (UTC+8): catalog header data updated
06/18/2007 10:50:42 (UTC+8): catalog model data updated
Error when deleting item 5F953A4645A9FA34E10000000A0000EC (ID)
Catalog update was terminated
How come Items are being deleted on an Upload?
Please help.

Hi
Which CCM version are you using ? Try to post what the failure message that you are getting for the Transaction ST22.
<b>Please go through the follwoing SAP OSS Notes and pointers below -></b>
Errror while uploading the supplier catalog data
Note 828553
Notr 841441
Note 936122
Catalog upload with errors ? :-(
Error when publishing a catalog
Re: CCM related - How to delete the item from a catalog?
Hope this will help.
Regards
- Atul

Similar Messages

Error when upload items in PIM

Hello!
I need to upload INTO PIM 5 000 000 items via API:
EGO_ITEM_PUB.PROCESS_ITEMS
EGO_ITEM_PUB.PROCESS_USER_ATTRS_FOR_ITEM.
I write some code and start it.
I received error no free space after insert 67000 items.
I did small analysis: "/var/tmp" has a lot of files like 'EGO_USER_ATTRS_DATA_PVT-2456282', so free space is off.
I eraze its manually and continue.
What is way to avoid this problem ?
Kind Regards
Lev

I resoved it:
It was debug log.
I disabled log by set p_debug_level = 0 in call EGO_ITEM_PUB.PROCESS_USER_ATTRS_FOR_ITEM.
All ok!

Experiencing "timed out" error when uploading podcast

I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...

- You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
- You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
- You should set the planning horizon and use NETPL (net change in planning horizon) in daily run. So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
- You should discuss with your BASIS team about the list of background job in the batch windows. Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
- You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
Rgrds,

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

No suitable driver error when upload a pdf

We are going to develop our own packaging tool which can provide convenient service for Adobe Content Server.
Before we begin on this project, we use the java sample console program which is called UploadTest to find out
how to interact with Adobe Content Server.
However, when we use the UploadTest jar tool to package a PDF to Adobe Content Server and send our request
successfully, the server always response a error as below with “httpStatus:200 " and “contentType:application/vnd.adobe.adept+xml”:
<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://192.168.34.56:8080/packaging/Package
No%20suitable%20driver"/>
Other details:
(1)I am in Guangzhou China now ,but the server is in the charge of our USA Team in American.
(2)The commandline we use:
java -Xmx1024M -jar UploadTest-1_2.jar http://our website/packaging/Package PdfFilePath -pass password.
Who can help me?Why do the error arise? Do I need some other steps to make? Waiting for help online .Thank you very much!

Thank you for helping us to catch the error.
2012/12/13 Jim_Lester <[email protected]>
Re: no suitable driver error when upload a pdf created by Jim_Lester<http://forums.adobe.com/people/Jim_Lester>in
Adobe Content Server - View the full discussion<http://forums.adobe.com/message/4918463#4918463

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Error when uploading file : Return code = 6 in LSMW

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

did you define the file in step 7 without any error and allocate in step 8 without any error before?
I mean in the same system where you execute the read step.
Make sure you have the file not open when you execute the read step.

I keep getting an error when uploading documents

I keep getting an error when uploading pages, keynote, or word documents into icloud.com. It won't tell me what type or error and it acts like it loads and gets all the way to the end of the bar and then says "error please try again." Please help!

Have you tried a different web browser when submitting your proof of eligibility?

Error when uploading master data

Hello everybody...
I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
Error 8 when compiling the upload program: row
227, message: The data type
/BIC/CCABZRAK_COUN_ATTR was modified
plz suggest me.....
Thanks & Regards
Rakesh Jangir

Hi,
There might be two reasons..
1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
2. Close the flat file while loading data...
Regards,
viren..

Error when uploading file :( Return code = 6 )

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

Hi,
If the Sy-Subrc is 0 then Success,
Sy-SUBRC is 4 then failure,
Sy-SUBRC = 6 then the user might be not access to read the file.
This is due to authorization issue.

Error when uploading file

Hi all,
we just have upgraded our EREC system to Enhancement Package 4, and we have now lot's of issues when the candidates try to upload documents in their cockpit. Even if the type of document is ok or the file size is fine also, there is the following error message : Error when uploading; the file name is invalid, or the file is too big
We have this error with lot's of web browser : IE6-IE7-IE8-Firefox 2.xx-Firefox 3.6-Safari 3 and 4-Chrome
It is impossible to debug this error, there is no stop at the breakpoints.
Did anyone have any suggestion ?
Our system information :
EREC 604 SP 5
NW 701 SP 5
Thanks in advance
Dominique

Hello Sai,
we already put an external breakpoint on the first step of the method called by the button, but it does not stop on this breakpoint.
It looks like the error message is generated by javascript or is in the cache, but it is not possible to find where.
WD component : HRRCF_C_ATTACHMENTS_UI
View : VW_ATTACHMENT_DETAIL
Method : ONACTIONAPPLY
Thanks for your help
Dominique

Error when uploading par files - Exception

Hi all,
I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is:
Messages:
INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par
INFO: Application successfully stored in the PCD
Messages from Server ID 8657950
ERROR: Operation failed: The archive com.sap.pct.hcm.attendanceoverview has not been deployed.
ERROR: Exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem.prepare]: com.sap.pct.hcm.attendanceoverview
The error is displayed in the administration console. The logs don't say anything useful. I'm getting a few exceptions about finding archives and this error message: get data source CVERS failed! Trying SAP/BC_UME...
I have checked the rights to all directories and the directory structure. We're running EP6.0 with SP 9.
Thanks for your time.
regards,
Dion

Hi Dion,
i would think that SAP tries to stop uploads of par files which should be installed with them SDM or import of a whole package.
Try the following :
- rename the par file name from com.sap.... to something else...
or :
- import the par into Developer Studio and change the project name
change/delete the META-INF files
Another question : why do you want to install only certain elements of the MSS package ?
Regards,
Kai

Error when upload Crystal report files to CMC

hi All,
i having an error when trying to upload a Crystal report files to CMC, the msg appears below :
Unable to find servers in CMS obt-sg-a1mgr.obtechglobal.com:6400 and cluster @obt-sg-a1mgr:6400 with kind fileserver and service FileStoreV2. All such servers could be down or disabled by the administrator. (FWM 01014)
any help would be appreciated, thanks.
Regards
Hariyono

Hi
can you please go to the CMC under Servers and check the status of your file repository servers? Are they enabled and in status running ?
Regards,
Stratos

Error in InfoPackage: Error when uploading Flat Files

Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?

hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps.

Error when uploading a tif file

Hi All,
I want to upload a file in tif format.i am having the file with tiff format.
when i upload through se78 /import and given the file name as c:\CCNA- Puerto Rico Region Logo.
But it is showing the following error.
Uploading TIFF Files to SAPscript Texts                                        1
Load File
c:\CCNA- Puerto Rico Region Logo
The file contains 8,678,690 bytes
This is a TIFF file with INTEL byte order
First IFD offset:                                8,672,788
Reading IFD from offset 8,672,788 Number of Tags         22
ImageWidth:                                          2,226
ImageLength:                                           910
Error: BitsPerSample tag has length <> 1 or 3
Compression:                                             1
Photometric Interpretation:                              5
Number of StripOffsets:                                  1
SamplesPerPixel:                                         4
RowsPerStrip:                                          910
Number of StripByteCounts:                               1
XResolution:                                     5,000,000 /     10,000
YResolution:                                     5,000,000 /     10,000
ResolutionUnit:                                          2
TIFF format error: No baseline TIFF 6.0 file
Appreciated ur valuable suggestions.
Thanks,
Aravinda

Hi,
Up loading tiff fife first activate rstxldmc program .
excute the program give ur logo name.
In se71 u can include that object , id, macrc or something (these are comes after excute the program give ur logo name)

Error when Uploading Items on a Delta Run

Similar Messages

Maybe you are looking for