Error when uploading master data

Hello everybody...
I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
Error 8 when compiling the upload program: row
227, message: The data type
/BIC/CCABZRAK_COUN_ATTR was modified
plz suggest me.....
Thanks & Regards
Rakesh Jangir

Hi,
There might be two reasons..
1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
2. Close the flat file while loading data...
Regards,
viren..

Similar Messages

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error when generating master data routines when activating infoobject

Hello Gurus,
I had an issue with one of my info object.
I Created the one Custom InfoObject with Just 5 Char without any masterdata and used that in many cubes. we promoted the objects and cube to test and production systems. just couple of days back we can see the InfoObject went to inactive status even though the version is active(not sure how it happend). This is only happens in our test system and production is working fine. when i try to activate the InfoObject again the test system it gives me an error
Characteristic XXXXX: Error when generating master data routines. Tried to correct in RSD5 etc. Checked in RSRV everything is fine. Tried to re-promote the object from Development system. The transport also failed with the same error even though it is in unconditional mode.
Can you please suggest me what are the options.
i cannot delete the object as it is used in many cubes which is having data.
Appreciate your quick response.
Thanks,
Bhaskara Rao.

If your Prod is working fine, it should work in test too.
Did it ever worked in test after transport?
Is it possible some one tried to change something in test? If yes, you will get error when you will try to re-transport it as new transport can't find the previous structure.
You may try to activate the IO using FM RSDG_IOBJ_ACTIVATE
Edited by: ashok saha on Mar 6, 2008 8:05 PM

0COSTCENTER Error when generating master data routines

Hi,
Characteristic 0COSTCENTER properties are changed. Check box - Characteristic is document attrib. has been checked in. Then the same is saved and activated. Again when trying to remove the check box and activating the 0COSTCENTER characteristic, the system says 0COSTCENTER Error when generating master data routines.
The Object Status of the Characteristic is showing in "Inactive, not executable".
Erorr message is:
Error in activating the InfoObjects
Message no. R7286
Please let me know how to activate 0COSTCENTER.
Regards,
Ravi

This has been solved.
In SE14, I have also deleted the data.
Go to Tcode SE16, IO Class is BW* and then select the relevant attribute then execute, select all the line items.
Go to Table Entry ==> Delete.
Go to Tcode RSODADMIN and Tab => Go to Generate Document Properties Tab ==> Select the Characteristic ==> Click Generate Document Properties.
I am able to activate the Infoobject 0COSTCENTER again.
Hopefully, this would be helpful for others also.
Regards,
Ravi

Error while uploading master data attributes thru flat file

while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a new

This just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet. The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version.
The best way to correct this error is to reload RSA1. Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench.
Brian

Processing overdue error when loading master data

Hello,
While loading data for master data infoobject, i'm getting peculiar error like processing overdue. what might be the problem.
Please respond as soon as possible it is very urgent.
REGARDS,
SRINIVAS OLETI

hi,
is this your first upload ? the rfc connection to source system is established well ?
try to check in monitoring
- tab 'status', click step by step analysis, what's the status of 'RFC to source system success ?' grey ?
- transaction st22 and sm21, any message ?
- check menu 'environment' - shortdump - in datawarehouse, check for source system also, then transaction rfc, ale management, system log ...

Error when reading master data attribute in transformation

Hi All,
I have 0employee in source DSO and it is mapped to Cube transformation correctly.. There are other objects in cube which are the attribute of 0employee master... I map 0employee to these objects and in transformation i select read from master data then it throws up an error...
bold S:RSTRAN:556 39 0EMPLGROUP 01 Standard Group 0EMPLOYEE
Dont know why this error is popping up ...
Any pointers on this...
Thanks & Regards,
Anup
Edited by: Anup Chaudhari on Feb 20, 2012 1:29 PM
Edited by: Anup Chaudhari on Feb 20, 2012 1:30 PM

Hi,
This is a strange error that everybody faces but you can try this way.
1) select the target object Employee attribute in the transformation
2) assign the source field in the transformation. the source field should be 0EMPID
3) In this source field there is a coulmn called IOASSIGNMENT. Type 0EMPID at that point
4) change the rule type from direct assignment to master data attribute. Now you can select the field 0EMPID.
Regards,
Siva

DTP Error when loading Master data from DSO to InfoProvider

Hi Experts,
My DTP is failing when I am running a DELTA load from DSO to the InfoProvider. The errors are either duplicate records or overlap of Dates etc.
Thanks,
SB.

Hi Gopal,
Here is the info on error message.
" There are duplicates of the data record 1 & with the key '00000000038 &' for characteristic EPROPERTY &. "
Hope this helps in understand the DTP error.
Thanks,
SB.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Can anyone list problems/errors when uploading data using BDC's and BAPI's?

Can anyone list the problems/errors when uploading data using BDC's and BAPI's?

Hi,
If you are actually creating a BDC to load data pls be more specific.
Data format incorrect. Tab delimited/ etc
Dates in wrong formats
Currency incorrect formats
Missing screens
Wrong transaction code
File not found,
Missing Mandatory fields,
Screen resoultion.
You should always use refresh for your Bdcdata table.
Loop at internal table.
refresh Bdcdata.
regards,
sowjanya.

Problems with uploading master data in BI 2004S

Hi all,
I wanna upload master data in FI from R/3 System to BI System. I created its transformation. Then, I migrated it WITH EXPORT option. After that, I created Data Transfer Process (DTP), I didn't change any thing, just "Save and Active". Then I created InfoPackage for it => choose Schedule tab and press Start. Open DTP and choose Execute tab -> press Execute.
1. In the case of successful process (the log showed no errors), How can we check that data is transferred successfully?
2. Case 2: I did all above steps for a data source. But when I opened InfoPackage -> it said "This InfoPackage has been already in Process Chain"... I still continued to execute its DTP but I failed. The log said that the data was duplicated.
What does it mean? And what should I do in this case?
3. Case 3: I have a data souce Account Type with <0ACCT_TYPE_TEXT> (icon dialog). I migrated it but failed. Then, after I refreshed, this datasource moved to the group that had been migrated before (in the end of the tree) but <0ACC_TYPE_TEXT> disappeared.
So, I cannot create DTP or InfoPackage for it to transfer. In this case, Do I have to re-create a DataSource? What should I do?
Thanks in advance.

case 1:
Check there might be duplicate record. as it is a text datasource language may be maintained. U can check in monitor what record is showing error.
case 2:
If u migrate the data source then it is a BI7.0 version.
If u want to recover 3.x datasource then u need to use RSDS .
Then again u can create Data Transaformation and DTP and migrate once again.
then load the data.
Normally if u r working on BI7.0 do all the stuffs(DT, DTP) using 3.X version then do the migration of datasource else if u migrate first and do the transformation then u will have to manual mapping and u may missed and do a lot of mistakes.
Thanks,
Debasish

Lsmw to upload master data

Hi,
if we want to upload master data for example customer master data,vendor master data and material master data.
then which one is the best method lsmw or BDC ?
if we use lsmw then we need to use recording or direct input program.
what will be the volume of data when we used lsmw for master data.
Thanks in advance.
Thanks,
Jigar

Hi,
The basis for deciding which method to upload the master data can be considered on the following:
1. Customer Requirement.
2. Volume of the data.
3. How much effort is required.
4. Whether error handling is to be done explicitly or automatically.
The most preference order as follows:
1. LSMW
Latest tool and less effort/coding is required. It covers all the methods.
- by standard Batch/ Direct input,
- by Batch Input Recording,
- by Buisness Object Method , and
- IDoc ( Intermidiate Document) .
2. BAPI
BAPI is an abbreviation used for Business Application Programming Interface. These are interfaces within the business framework to link SAP components to one another and SAP components with third-party components.
The SAP Business Objects are an essential part of the Business Framework and the prerequisites for interoperability. SAP Business Objects cover a broad range of R/3 business data and processes and can be accessed using BAPIs. The SAP Business Objects and their BAPIs thus provide an object-oriented view of R/3 business functionality.
3. BDC
It can be done in two ways:
a) Session - it handles error implicitly .
Transaction: error handling is explicit.
b) Call transaction is 6 times faster than session .
c) Session can handle multiple transactions while, call transaction can handle one transaction at a time.
d) Session method is used to handle basically very lage amount of data .
What will be the volume of data when we used lsmw for master data.
It depends on the company master data volume in their legacy systems. LSMW can handle huge volume data.
Hope this will help.
Regards,
Ferry Lianto

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Error when uploading master data

Similar Messages

Maybe you are looking for