Error when using windows update to upgrade to build 10061
When I use windows update to upgrade to Build 10061 it goes all the way through downloading but as soon as it gets to the installation it errors out. The error code given is 8024201C. Any help would be appreciated.
Hi Wishing,
What is your current situation?
This issue might be caused by 3rd-party software handles, you may take a try to run Windows 8.1 update assistant and see what it says:
Upgrade Assistant: FAQ
Let us know the results.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created. -
RPC Server not Available error when using Windows Fax & Scan under Windows 7
RPC Server not Available error when using Windows Fax & Scan under Windows 7
Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
"Could not complete scan" error when using Windows Fax and Scan
"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
MotorbikeYou can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Corrupt data error when using Windows backup on Oracle
Our SAP servers include a SDLT internal tape drive that we use for doing a complete system backup. When using Windows Backup we get the following message in the backup log:
WARNING: Portions of "\oracle\T00\sapdata1\protd_2\PROTD.DATA2" cannot be read. The backed up data is corrupt or incomplete.
This file will not restore correctly.
This is occuring on a couple of different systems but the wierd thing is when this happens in occurs on one Oracle drive in one system and the other Oracle drive on another system i.e. the G: drive on our TST sysytem and the E: drive on another. The E: and G: drives contain the main Oracle datafiles.
Has anybody ever encounter something like this and what can I do about it?
Thanks;
Gale S.Especially no backup tool would know about the
fact
that a Oracle block had been changed after it was
copied.
Now I have to contracdict
There are backup tools (e. g. OpenFile Manager from
Legato/EMC), that track the filesystem changes and
makes sure, the backups are consistent in sense of
filesystem blocks. We´re backing up some ORA
databases (non-SAP, 7.3.4 and 8.1.7) for ages now -
and I never saw this kind of corruptions.
Well, these Backup-Tools do perform copies I/O-Consistent. That's different than DB-Block-consistent in the first place. Anyhow due to the fact that the DBMS do have a syncronizing between I/Os and writing out the blocks this leads both to consistent blocks.
I just wonder, how the database would deal with such
"inconsistent" files. Given the fact, you start a
backup at filesystem block 0, the database is being
backed up and a transaction is committed and
something is written to block 100, 200 and 500. The
backup is on block 300. If you now restore the
database, it has the already commited block 500 in
the file but 100 and 200 are not yet written in the
database file. The redo will then find an already
commited transaction on 500. What magic will tell the
engine, that this is due to an online database
backup? I mean, if you set the tablespace to backup,
the engine "knows" the state - but if you just backup
the file, the engine is unaware of that... I´m just
curious how this is handled...
Well the trick here is: we tell the database before we plan to copy the data. When a ONLINE backup is done, the tablespaces are set into BACKUP mode. This changes two things for us:
1. The datafile headers of these tablespaces are not updated anymore although dirty blocks are still written out to these files. Since the control files that keep the SCN (system change number) are updated nevertheless, the database will know at recovery time that these files had been in online backup mode and do need recovery to become consistent again.
2. The UNDO-information is not only written out to the UNDO/ROLLBACK-Tablespace but additionally to the REDOLOGS. So, for the time where the tablespaces are in BACKUP mode, we have all information needed to make a block consistent again - regardless if a transaction had been commited or rolled back - in the redolog. So a full recovery of all changes is possible with
that.
That's basically the "magic" behind this.
If the copy of the datafile is done without this - well, then there's no magician in the world that would been able to get it consistent again. Online Backups with Oracle are only possible with BACKUP mode or RMAN (ok, and possible some 3rd party hacks...).
KR Lars -
Error when using Windows Task Scheduler in C#
I am using Windows Task Scheduler in my Visual C# application. I add the reference to C:\Windows\SysWOW64\taskschd.dll (on a 64-bit system), and Visual Studio creates a COM wrapper Interop.TaskScheduler.dll. Ths works fine on Windows 7. However, when
I run on Windows 8.1, I get the following error:
Unable to cast COM object of type 'System.__ComObject' to interface type 'TaskScheduler.IExecAction'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{4C3D624D-FD6B-49A3-B9B7-09CB3CD3F047}' failed due to the following error:
No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
I noticed that on Windows 7, the above GUID exists in the registry under HKEY_CLASSES_ROOT\Interface, with the value "IExecAction". But on Windows 8.1, there is no such GUID, and no key with value "IExecAction". I use IExecAction
in my code.
When I develop on Windows 8.1, the program compiles, but at runtime I get the above error.Hello tomszms,
Here is a blog related to this issue and the troubleshoot steps of his error is very useful for your case, so please check for it:
http://blogs.msdn.com/b/smondal/archive/2012/10/02/unable-to-cast-com-object-of-type-system-comobject-to-interface-type-microsoft-visualstudio-ole-interop-iserviceprovider.aspx
Please try use the same way to track the logs and then try use the regsvr32
on your Win 8 machine to re-register that dll and see the result.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
When running the Universal Windows Platform (UWP) BackgroundTansfer sample (C# or C++) in a phone emulator (i.e., Debug Target is Emulator 10.0.1.0) the sample builds and deploys successfully, but clicking any button in "Scenario 1 File Download",
"Scenario 3 Completion Notifications" or "Scenario 4 Completion Groups" will result in the following exception:
An exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.ni.dll but was not handled in user code. Additional information: The system cannot find the file specified. (Exception from HRESULT: 0x80070002)
This posting is provided "AS IS" with no warranties, and confers no rights.I am getting the same error even with the references recommended here. This is my code
using (var stream = await Windows.Storage.ApplicationData.Current.LocalFolder.OpenStreamForWriteAsync(
JSONFILENAME,
CreationCollisionOption.OpenIfExists ))
serializer.WriteObject(stream, myCars);
I can read it back as long as I don't stop the app/emulator. When I run the emulator again the file is gone. I tried loading the app to my Windows Phone and the same thing still happens. -
Error when using software update server
Whenever I try to point a non-managed client to use my software update service, I am getting this error;
2007-10-23 16:42:59.054 softwareupdate[8958] Loading CatalogURL http://fileserver.occumed.net:8088
2007-10-23 16:42:59.068 softwareupdate[8958] loader:didFailWithError:NSError "XML parser error:
Encountered unknown tag HTML on line 2
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
" Domain=SUCatalogLoader Code=0 UserInfo={
NSLocalizedDescription = "XML parser error:\n\tEncountered unknown tag HTML on line 2\nOld-style plist parser error:\n\tMalformed data byte group at line 1; invalid hex\n";
NSURL = http://fileserver.occumed.net:8088;
XML parser error:
Encountered unknown tag HTML on line 2
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
Software Update Tool
Copyright 2002-2005 Apple
Any ideas whats causing this?
The software update does not return an error if not using the unix console, it just shows no valid updates.The reason why you are receiving is because you don't have the forward slash after the 8088.
Your current setup: http://fileserver.occmed.net:8088
Correct setup: http://fileserver.occmed.net:8088/
This will solve your problem. -
When using Windows 8 version 64 bit, and installing Adobe Reader I receive error 1500.
Error 1500 using Windows 8 version 64 bit when installing Reader
Is there anything else beside the number 1500?
Try using the offline installer from http://get.adobe.com/reader/enterprise/ -
Windows 7 SP1 not listed using Windows Updates
I have a Vaio VPCEC390X and SP1 for Windows 7 will not upload automatically using windows update. I've uploaded the system updates for my model from the esupport sony site also. What could be preventing this update? I have checded my settings Im getting other updates just not the one for SP1.
When the message came up saying that this version of windows was incompatible... I tried 'cancel'. It moved on. It was in the middle of step 3 of 4 on the upgrade. It appears to be ok now. I'll let you know if I have any more trouble.
-
Burning error when using toast
i am using leopard 10.5.5 and using toast 9.0.2 with the hd plugin.
i am getting an error when trying to burn a dvd, i have created a file in an animation program, taken it into final cut pro, edited what i wanted, then exported it as 1080i50. the file plays no problem in quicktime on my laptop, but i need to put it on DVD. opening up toast, it goes into the prog window, encodes the file but then i get an error, -50, can not burn DVD.
does anyone know of this problem, or maybe has any ideas on what i can do to work out the problem?
cheers
bretBruce Etnyre wrote:
His first sentence states the OP is using 10.5.5 and apparently has not updated the profile.
sure confused me
I occasionally get errors when using Toast to burn DVD’s. I found quitting other applications during the burn eliminated the errors. Not the optimal solution, but it couldn’t hurt to try.
I think he is referring to HD DVDs per his first sentence, but it's not clear to me.
It could be anything from a bad blank to a flaky optical writer to, as you mention, other software running. I usually turn all my apps off when burning DVDs. Mail, Safari, Firefix, etc., although on fast machine like this one it probably does not matter.
On the other hand, when I burn a R/W DVD or CD, I ignore these things and just computer as usual. -
How do I remove an old username from the app store when using the update function
How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
Error when trying to update or download any app
I'm getting an Error when trying to update or download any app from Mac App Store
Every time I try to update xCode to version 6.2 but I get this error :
The server gave an error during download: 503 Service Unavailable.
So I tried to download a random app from the App Store but I got the same error message.
So any advices ?Hello HusseinAlBehary,
Sorry to hear your troubles updating and downloading apps from the Mac App Store. Based on when you were doing that, it looks like the Mac App Store was experiencing difficulties. It is not currently so you should be able to upgrade with out issues now. If you experience this in the future, look at the page below to start you on figuring out if it is something on your end or Apple’s end.
Apple Services, Stores, and iCloud
https://www.apple.com/support/systemstatus/
Regards,
-Norm G. -
I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match
YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
TMI?
GB -
UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)
Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
//Example calling DSE internal function
//UserFunc.uStop("Terminated by user");
key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
OutString = UserFunc.uDESEncrypt(key, Par);
return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
MattHi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...
Maybe you are looking for
-
photos not getting added up to my photostream. It's showing some kinda registry error in my windows. Plz help!!
-
I have an error message 1601 and yet I am referred to error messages in the 1400s. Is this the appropriate article for figuring out why itunes does not recognize the ipod? Apparently, this is preventing my device from loading new music.
-
Allow user to change quiz answers
Hi, I've made a quiz using random multiple choice questions from a question pool and have the option to allow backward movement in the quiz. If a student selects an answer to a question and wants to go back and change it, it's not allowing the origi
-
Can I reset my lost iPod from iTunes?
My iPod touch 4th generation was recently lost/stolen. I didn't have a passcode on it. I was wondering if it was possible to reset it from iTunes if the iPod connects to wifi.
-
The time stamps on my saved files are not correct. They give the time in the time zone where I was previously and where I last restarted the computer. Is this the expected behaviour? The time displayed at top right of the menu bar IS correct - it cha