Error when viewing PO print preview - function mod /SDF/AL_MAP_TRANSID_LOGH
Hi all,
I wanted to use smartform '/SMB40/MMPO_L ' for PO print out.
I configured the driver program '/SMB40/FM06P' and the smartform in the tcode NACE.
But when I hit the print preview button on ME23N. I am getting this error
Function module /SDF/AL_MAP_TRANSID_LOGH does not exist
What is this function module?
what might be the problem?
How can I solve this issue?
Thanks,
Goldie.
Hello,
have u got the solution for this issue?
I am having similar pop up error msg but it is in BW system!
Any thoughts why the system is throwing this error msg?
Raj
Similar Messages
-
Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
However, when I print from Safari or another program, I have no problems
== YesterdayThe only solution to corrupted files is to restore from your back up.
Regards
TD -
Add Print Preview function in FB03
Hi Gurus,
I have a requirement to add the print preview function to view payment voucher in FB03.
The scenario is such that whenever user enter the document number in FB03 or access vendor line item (FBL1N) and double click on the line item, system will direct them to FB03 screen. Therefore whenever user does that, they will be able to see the print preview function to view payment voucher and thus print it as and when required.
Currently they have only the spool to view and print and spool could not keep the items for a long time. Therefore this requirement exists.
Thus are there any ways that I could attach a print preview function to the standard SAP FB03? or how do I provide them the view function as and when they need it in the system. The users do not want to have a customise program to have them enter the document number, company code in order to view. They want the function to exist concurrent to the document number anytime whenever they want it.
Need advice.
rgds
eddie limHi
Many thanks for your assistance.
First of all when user run F110, there will be a payment voucher generated together and this will be stored in the spool but spool can only store the information for a certain period of time. This payment voucher has the document number attached to it. Hence the users requirement is that they would want to view the payment voucher as and when required either from vendor line item (FBL1N) or FB03. Currently, there are no such button in FBL1N or FB03 which allow to view payment voucher.
Therefore how can I attach the payment voucher to those accounting document for the users whenever they run vendor line item or FB03 on an ad hoc basis?
They do not want a customise program to key in the document number and view the payment voucher from there. It is double work for them and as such to attach a print preview function to either FBL1N or FB03.
rgds
eddie lim -
Lightroom encountered an error when reading it's preview cache
I been getting this error for over 2-3 months and thought it would go away with the new version releases, i tried all the standard fixes,deleting the catalog,compacting etc. even moving it to new folder, reinstalled the software twice. The whole nine yards. IMHO, there's a problem with the software, it may be uique with differetent type of machine setup or a corrupt file in the in the catalog and the compacting doesn't fix it.
The error always happens while in the develope and crashed, has to leave the software (sometimes it just hangs the software and you have to kill the task manually). You have at least 10-15 seconds before going back in, otherwise it will still crash, a thread is still occuring from the orginal crash and still completing it's task. That's the error, annoying as heck.
My only hoping is a new version of LR comes out soon (4.0) and it goes away, otherwise, I'm going to find something else-- driving me crazy, I spend about 10-15% of my time each week getting out and back in to make go away, then can go for a day(s) sometimes and no problems. I tried recreating the problem on specific photos where I think it might be corrupt, that doesn't give any clue, there is no pattern to this at all, it happens randomly on new photos and old photos, yet i can go back to those photos again and no problems.
Any NEW ideas would be appreciated (no compact, no new catalogs, new installs, turn off various options cache preview etc. move to new folder and more.....done that etc.).The error is exactly what's it in the title of the post, Lightroom encountered an error when reading from its preview cache and needs to quit. That's it.
I don't know what else to tell you, i wish I had more. This is all over the internet, I followed pretty much all the solutions, delete the catalog or delete the preview folders (tried both). Tinker with the cachee preferences. Most people kill the preview folders and the catlog gets recreated and there problem is resovled, doesn't work for me.
No cloning, totally two different catalogs (not networked etc.) a good question though.
When I am refering to catalog and cache, I strictly talking about LR only, nothing outside of that or in the operating system, just LR files only, here they are:
I have a LR catalog folder called---> C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
you have another folder called: LR_Catalog Previews.lrdata (with many subfolders underneath at)
and I have LR catalog filein C:\Users\Mark\Documents\LightRoom Catalog\LR_Catalog
LR_Catalog.LRCAT
That's it, a file and a folder with many sub-folders. I'll get a screen print with error next, but it's basically what I said earlier in the beginning, you can be in develope or even the library, and error occurs in a message box, you hit ok and the application exits. On average it can happen 6-7 times with an hour and sometimes not at all, working with same the photos. Sometimes it can happen within mintues, sometimes not at all for over 2 hours. There is no specific pattern to it. -
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."Help
PleaseStan Blumberg wrote:
I have deleted the file but the message persists even after restarting the computer....any advice??...I am using LR 5
You don't delete a file, you have to delete a folder. Is that what you did?
If you deleted the folder specified above, and you still get the message, then it's the wrong folder. Use your operating system's search function and find ALL folders on ALL disks whose name ends with Previews.LRDATA, delete each one found, and then try opening Lightroom. -
How to disable Purchase Order Print Preview function in the Portal
We wish to expose some purchase order functions in our SAP Portal 7.0. The problem is that when we run any of the purchase order transactions as SAPGUI for HTML, the Print Preview function displays the full purchase order. This means that any user who wishes to short cut processes can display and then print a purchase order before it has been approved if they use the Portal to display the purchase order.
If the purchase order transaction is run from the normal SAPGUI, the Print Preview function only displays the top of the purchase order and the print function is disabled. Has anyone tackled this problem before and worked out a way of stopping users from using the Print Preview function to display purchase orders in the Portal and then print them?
Regards,
Tom Maggshi,
DATA: w_compop TYPE ssfcompop.
w_compop-tdimmed = ' '. "Print Immediately control parameter should be empty..
Then only print preview pop-up will come..
then call your smartform like this..
CALL FUNCTION fnam
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
TABLES
it_vbdkr = it_tvbdkr[]
it_vbdpr = tvbdpr[]
it_zglentitycode = it_zglentitycode[].
regards
vijay -
FireFox keep saying "unexpected error" when trying to print web pages.
FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
Please email me on what to do to get FireFox to work.
I don't see anything in the FAQ that might help me.Hi,
Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration] -
Lightroom 5.7.1 encountered an error when reading from its preview cache
Lightroom 5.7.1 encountered an error when reading from its preview cache and needs to quit.
Win 7, 64 bit. memory 32 GB
Have repaired and re installed LR 5.7 the 5.7.1,
Still get the same error message.
How can I solve it?Hi, unfortunately it didn't work for me.
Am still stuck in a loop when launching Lightroom.
Have tried launching it in Safe mode, checked my graphics drivers and windows update
Deleted folders from Lightroom 5 Catalog Previews.lrdata and Lightroom 5 Catalog Smart Previews.lrdata (excep Previews and Root_pixels Db files.
Any other suggestions?
Thank you! -
Lightroom encountered and error when reading from it preview cache and needs to quit
A power outage caused my Lightroom 5.2 to shut down without closing. When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error. Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!
Search the forum, this has been answered many times.
-
"Lightroom encountered and error when reading from its preview cache and needs to quit"
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
Your thoughts?
--Kenny Brandon WilsonTalked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
Gokul: Click on start and type %appdata%, then open roaming folder.
Edward: ok
Gokul: Open Adobe folder.
Gokul: Open Lightroom folder.
Gokul: Open Lightroom folder> Preferences.
Edward: ok
Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
Edward: OK
Gokul: Please check if you can launch Lightroom without any error.
Edward: it shows me a welcome screen and is asking me to select my country
Edward: aka, register the software
Gokul: You can skip and launch it.
Edward: LR catalog not found
Gokul: Please select the catalog.
Edward: my original catalog?
Gokul: Yes.
Edward: testing integrity of catalog
Edward: loaded just fine
Gokul: Okay.
Gokul: Please check if you can re-launch it again.
Edward: yes, it worked!
Gokul: Excellent!
Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
Edward: aha....ok
All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month! -
LR encountered an error when reading from its preview cache and needs to quit.
I have the 30 day trial version of Lightroom. I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message. How do I resolve the problem? And how do I reset the 30 day free trial? I would like to have time using the product, before deciding on the annual contract.
"LR encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you.Delete the preview cache from the Lightroom folder in your Pictures folder if you used the default placement. It has the extension .lrdata.
You cannot reset the trial period. -
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
I've tried renaming my catalog.lrcat file. I've copied over my most recent backup of the catalog.lrcat and that didn't work either.On Mac:
PS - to open the previews "folder" (a "package" is just a "special" folder) on Mac, ctrl-click and choose "Show package contents.." - same way you open any other special folder, like .app or .lrplugin..
Rob -
Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message. Says Lightroom will attempt to fix the problem the next time it launches but that is not happening. How do it fix this?
Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT
-
lightroom 5 is not opening it gives me an error message there is an error when reading from its preview cache and needs to quite
it also says it will attempt to to fix the next time it opens it doesn't do anythingCheck this thread. Your Previews Cache files are corrupted.
Re: preview cache?
Maybe you are looking for
-
Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?
Hi, I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output? If yes, should I get any specific DVI-to-HDMI adapter? If yes, will it have sound with it? Thanks.
-
Unable to connect to WPA after updates
I'm trying to connect to a WPA2 AP with hidden ssid via wpa_supplicant (tried NM also, don't say that please). I have two machines: 1) rt61pci driver, wifi works, can connect to open APs, can't connect to WPA2 hidden ssid AP This machine used to be a
-
I have CS6 10.0.6 x64 extended on Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?
-
How can I get my i books from my iPad to sync onto my iPhone
how can I get the downloads on my iPad to sync with my iPhone
-
VS2012 - BTS 2013 : generated Items - consume adapter service does not work
Hi, I have Instaleld VS 2012 and BTS2013..everything is OK. i tried to installed a new project and whene i tried to use generated items / consumeadapterservice, i get this error message: An invalide character was found in text content. do you have