Error when we create the source system file

i am creating the source system file of ECC to BI. how to slove this problam. when i am trying activating this error is getting.
The following errors occurred in the source system: RSAR 374
Result of the destination check: Timeout RSAR 375

Mr. Reddy,
Check out this links.
Error while source system creation/Source system transport
Hope it helps you.
SRS

Similar Messages

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
<b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error when jumping to the OLTP system

Hi Gurus,
Some data loads are failed, when our BI consultant tries to analyse the issue, he getting the error " error when jumping to the OLTP system " " Screen output without connection to user"
We are using BI and ECC 5.0 as back end system.
Please let us know how to resolve the issu.
Thanks in advance
VJ

Hello,
I have changed user to Dialog user but still the the same issue.
Please guide me how to go ahead.
VJ

Error when I create the New material Master (MM01) for New Plant.

Dear experts,
I got the error when I create the New material Master (MM01) for New Plant.
Error: Valuation Area 2800 Not yet productive with Material Ledger.
So Pl send me the solution asap.
Venkata Raju Khottari

Hi,
Have u assinged Plant to Company code?
If u say no, use T.code OX18.
Regards,
Murali
Assign points if it is useful.

Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Error when trying to compound source system

I am receiving the error message R7 405 "Inconsistent Compound with char x and Ref char x" when I try to compound 0SOURSYSTEM to some of my infoobjects.
Has anyone seen this issue and been able to resolve it?
A simple scenario would be to try to compound source system with 0Division. Division has a reference char of 0DIV_HEAD. Both are collected in RSD1 via the free selection of infoobjects. 0Division is changed and both objects are selected and activated. The resulting error R7 405 is then displayed by the system. We are receiving this for multiple objects. I was able to convert Material with all its dependencies.

I get it.
This is what I did. I added source system as compounding IO to reference object, say ZDIVISION in IO editor. I saved it (it was giving me activation error). I then opened the referencing char, say ZDIV_HEAD in IO editor and added source system compounding. It was again giving me activation error, so I just saved it.
I went to RSD1, collected these two IOs and activated. I got an error because the reference IO was in a comm structure which had no source system. I deleted that infosource, and activated both the IOs again in RSD1. It activated just fine. Both IOs are active now.
By the way, the IO editor does allow you to add compounding for a referencing IO (it gives activation error though).
Not sure if this helps.

Error when I create the database

I install the peopletools 8.49 for Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and my operating system is Microsoft Windows Server 2003 Enterprise Edition Server Pack 1, v.1023.
When I have installed the peopletools and the database, I modify the scripts in <PS_HOME>\scripts\nt and then change to <PS_HOME>\setup\PsMpDbInstall and double click setup.exe to run the database configuration wizard. All of the scripts are running correct, but the Data Mover is error. So I run the Data Mover manually. I create Data Mover import scripts and run it. It’s ok. Then I check the logs. I find the follow error:
psadmin.log:
ALTER TABLE SQLPLUS_PRODUCT_PROFILE ADD (LONG_VALUE LONG)
ERROR at line 1:
ORA-00942: table or view does not exist
psdmtx.log:
PSDMTX Error: signon
verifyToolsVer.log:
select TOOLSREL from PSSTATUS *
ERROR at line 1:
ORA-00942: table or view does not exist
sqlnet.log:
Fatal NI connect error 12557, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cs.lab.net)(PORT=1521))(CONNECT_DATA=(SID=PSDB)(CID=(PROGRAM=C:\pt\bin\client\winx86\psdmtx.exe)(HOST=CS)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.5.0 - Production
Time: 19-MAY-2009 15:33:27
Tracing not turned on.
Tns error struct:
ns main err code: 12557
TNS-12557: TNS:protocol adapter not loadable
ns secondary err code: 12560
nt main err code: 527
TNS-00527: Protocol Adapter not loadable
nt secondary err code: 0
nt OS err code: 0
Then I run version application engine program:
C:\Documents and Settings\Administrator>C:\pt\bin\client\winx86\psae.exe -CD PSD
B -CT ORACLE -CO SYSADM -CP SYSADM -R INSTALL -AI VERSION
Message Set Number: 0
Message Number: 0
Message Reason: Invalid User ID and password for signon. (0,0)
Error in sign on
PSDB: database name
SYSADM: peoplesoft owner id
How can I resolve it?

I create the database manually too. The errors are the same. I can login in data mover by SYSADM user or people user and the database and listener is running. However, I run version application engine program:
C:\Documents and Settings\Administrator>C:\pt\bin\client\winx86\psae.exe -CD PSDB -CT ORACLE -CO SYSADM -CP SYSADM -R INSTALL -AI VERSION
Message Set Number: 0
Message Number: 0
Message Reason: Invalid User ID and password for signon. (0,0)
Error in sign on
I change the user to try, it’s the same.
Edited by: hzg on May 21, 2009 9:38 AM

HT3275 an error occurred while creating the back up file. What to do to remedy this

What can be done to remedy the notice" a problem ocurred while creatng backup folder?"

See Pondini’s excellent Information Here...
http://pondini.org/TM/Time_Capsule.html
More Info here > http://pondini.org/TM/Troubleshooting.htm

Error when creating SAP source-system in RSA1

hi,
we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
<b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
Message no. R3225
Diagnosis
In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
System Response
Processing has been terminated and all changes undone.
Procedure
Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
reg, Martin

mr. kapadia,
there is one entry in table rsbasidoc, and it looks like that:
SLOGSYS     D01MAND700
RLOGSYS     D01MAND700
OBJSTAT     ACT
BIDOCTYP    ZSCA017
TSIDOC3X    0
TSPREFIX    CA
SRCTYPE     M
SAPREL      700
TSTPNM      D78358
TIMESTMP    20.070.622.093.042
SBWBCRL     700
RBWBCRL     700
looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
reg, Martin

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

An error occurred in the source system (DB Conect)

Hi,
It message appear while an ODS was loading data fully to a Cube.
Please, can anyone help me to solve this problem?
Thank you very much in advance.
Jorge
Mensaje de error del sistema fuente
Diagnóstico
An error occurred in the source system.
Actividades en el sistema
An error occurred in Extractor .
Check the error message.
Procedimiento
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.

HI,
go to RSA1->Source systems -> Right-click -> check. if the connection is OK then, u will find the message in the status bar saying that, source system connection ok.
otherwise select the source system>context menu>activate.
if its activated then replicate your data source if it is giving error while activating source system, then contact your BASIS Administrator to activate the Source system.
plz assign points
regards
vadlamudi

There is an Error when I save the Indesign file!

There is an Error when I save the Indesign CC file!
Cannot save it after opening for awhile!
It makes me lost all my work!
[expletive deleted] Indesign!
Message was edited by: Peter Spier

Yeah, sure, swearing will help you.
Instead rather give important information, unless you just came here to complain and not wanting to ask for help.
1. What error?
2. Where is the file saved - local HDD or network?
3. Will "Save as..." work?
4. When closing ID and opening again, it should restore the files (data loss due to crash prevention) - will you then be able to save?

Error when we create the source system file

Similar Messages

Maybe you are looking for