Error when writing to the Internal Buffer-runtime error during querydisplay

Hi
          I am working in BW 3.5. I am trying to run a query in BEx Analyzer but I am getting the following Error
Error when writing in the Internal Buffer see OSS note 156957
I tried for the note but I am not getting relevant information.
Please let me know what to do.
Thanks,
Padma

Hi,
please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
It should resolved your issue.
Thanks,
Venkat

Similar Messages

  • 'Unknown Error 0x3' when writing with the internal DVD drive

    I use Toast to burn DVD's and have been getting a lot of harware failures with a '0x3' error code. Burning the same content to an external Firewire DVD drive works perfectly. Anyone else seeing this? I've only had this machine a few months and would hate the think the drive has died already. I have the extended Warranty so no problem there, but I'd rather not have my computer out of service while Apple works on it.
    Anyone serviced their own iMac with Apple supplied replacement parts? I've done my own service on desktops for many years, but I don't know if the iMac internals are such that things like drive replacement can be done easily (i.e. can you just open the case an pop the drive out, or do you need to tear the whole machine apart to get to it?).
     20" Intel iMac (2.0GB RAM, 500GB HD + 1.5TB external, 20" Cineama Display)   Mac OS X (10.4.7)   All tools, no talent!

    Hi,
    please apply the note 1614788. After note implementation, you need to set parameter RSR_HIER_THRESHOLD_EXPORTDB in table RSADMIN via report SAP_RSADMIN_MAINTAIN in transaction SE38.
    If you set this parameter to value 50.000 for example, all hierarchies with more than 50.000 nodes will be buffered in the database instead of using the export/import buffer.
    To find out the current size of a hierarchy, goto the hierarchy maintenance in transaction RSH1 and copy the hierarchie ID from the header data. With this key you can goto transaction SE16 and select table RSRHIEDIR_OLAP (Field HIEID is the hierarchy ID).
    It should resolved your issue.
    Thanks,
    Venkat

  • I/O Error when writing access Log buffer to file. error number: 28

    Hi,
    Oracle OracleAS Web Cache 10.1.2.3.0, Build 10.1.2.3.0 080201 is writing events like this:
    [alert 13215] I/O Error when writing access Log buffer to file. error number: 28
    I've looked for this alert and i've found this description:
    WXE-13215 I/O Error when writing access Log buffer to file. error number: %d
    Severity: alert
    Cause: I/O error happened when OracleAS Web Cache tried to write to the access log file.
    Action: Check the status of access log file. For example, see if the disk is full
    Anybody knows what "error number: 28" stands for? The logs are sended to other server and it seems that the disk size is ok.
    thanks!

    I tested again...it seems LabVIEW doesn't like the way I wrote the measurement files. I attached a set of VIs (ZIP-file) to give you a clue how it was done. When I try to save and read a file containing just plain DBLs from a 1D-Array (see attached file generating VI) it works perfectly well for large file sizes.
    So there might get something messed up by the way LabVIEW saved the measured data. You'll notice, that I (accidentally) left the "prepend array string size" input of "write to binary file" function unwired which means that the size information will be written as a type of header. Maybe this is the reason that it doesn't work as expected...
    Attachments:
    VibrationMeasurement.zip ‏76 KB
    generate_test_bin_data.vi ‏12 KB

  • Open Hub DTP issue (Error 21 when writing to the local workstation)

    Hi,
    I am using an openhub destination to output my csv file. Its a local workstation share folder. Data Provider got around 50000 rows (expecting a 40MB file). When ever I execute the DTP, it run for first data package and fell down with below error message.
    Error 21 when writing to the local workstation
    Error while updating to target XXXXXXX (type Open Hub Destination)
    Operation  could not be carried out for
    Exception CX_RS_FAILED logged
    Exception CX_RS_FAILED logged
    Sometimes the file get created with partial entries, most of the times the file wont even get created. I created new dtps and tried the same. Changed the package size, servers, parallel processes etc, but of no use.
    Thanks Neo

    Hi Neo,
    Did you try to define the logical/physcal file path from tcode FILE? If not can you try to use this option and see if it works.
    Also can you change your DTP settings by reducing the data packet size to see if your facing this error message?
    Thanks
    Abhishek Shanbhogue

  • Error when writing the trace in ST01

    Hi Gurus,
    Good day!
    Please advise on how can I resolve this issue in ST01. I'm getting an error "Error when writing the trace No such file or directory".
    Appreciate your help.
    Cheers,
    Virgilio

    Hi,
    Check this link
    http://help.sap.com/saphelp_nw04/helpdata/EN/ae/ed0ad513d0074e944879f05ef318d5/content.htm
    Regards,
    Renu

  • HT1926 When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple?

    When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??

    Exactly the same problem.  But it gets worse.  iTunes has now disappeared from my list of installed programs so I can't uninstall anyway.  Appalling problem.  This update clearly didn't get proper testing before release.
    In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would.  Of course there have been a lot of updates since then, so it is definitely worth asking the question.  Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
    I certainly hope they get this fixed soon.  I use iTunes mainly for podcasts on my iPod and I can't download anything right now.

  • Help: An error when I initial the planning areas:internal error

    Hi,
      An error when I initial the planning areas, I create time series objects for planning area DP01, system show an error message to me as follow:
      internal error [/SAPAPO/OM_TS_TGRID_CREATE]
      Message no. /SAPAPO/TSM099
    Thanks,
      Thomson

    Hi Thomson,
    I think in planning area you did not only add the time series key figures
    to the planning area but also defined key figure semantics for those
    key figures. This must not be. To see those semantics you can check
    the key figure details in transaction /SAPAPO/MSDP_ADMIN on the
    key figure tab by selecting key figure details. For the time series
    keyfigures, the semantics column is filled with values like 300, 301,
    etc. If you wants to use time series key figures in addition
    to the standard SNP-key figures, the semantics field has to be empty.
    You can compare that with the settings in the other planning area where
    everything is working fine.
    If this is not the case then please refer the below note and execute the consistency reports as in note:
    577038     Data inconsistencies in SNP
    Regards,
    Sunitha.

  • Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

    Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
    Process:         Adobe Premiere Pro CC 2014
    Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier: com.adobe.AdobePremierePro
    Version:         8.1.0 (8.1.0)
    Code Type: X86-64 (Native)
    Parent Process: launchd [2538]
    Responsible:     Adobe Premiere Pro CC 2014
    Date/Time: 2015-01-06 14:04:23.500 -0700
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Crashed Thread: 55  Dispatch queue: com.apple.root.default-priority
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Customer created test export with 777 permissions and set mount parameters to the following:
    mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
      -- Original mount options:
         General mount flags: 0x40 async
         NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
      -- Current mount parameters:
         General mount flags: 0x4000058 async,nodev,nosuid multilabel
         NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
    The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
    478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
    479         V3 CREATE Reply (Call In 478)
    484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
    485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
    V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT  -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster.  Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

    That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard.  FAT32 only allows for file sizes up to 2 gigs.  And as soon as it reaches that...I would get that error.  I don't know if that is why you are getting that error...but it would be easy to check.  1) are you generating a file that is over 2 gigs?  2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

  • Error while writing to the database (PTRV_HEAD/PTRV_PERIO/Cluster TE)

    Hi All,
    At the time of creating a travel request, I am getting the following error :
    Error while writing to the database (PTRV_HEAD/PTRV_PERIO/Cluster TE)
    Please advise how to resolve this issue.
    Regards,
    Rahul

    such problem occor when u have not defined the number range
    Set Up Trip Number Ranges
    if the problems remaines after defining number range...keep check all transaction there may two three more numbers ranges has to define..
    this prblem is only due to number ranges not defined by you.

  • Error when sending message: 500 Internal Server Error

    Hi
    IE is not accepting any messages,
    when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
    following things what i have noticed.
    1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the  IE admin) URL is  "http://<host>:8000/sap/xi/engine?type=entry"
    2. SICF all the XI serivess are up and running, i am able to test these service.
    3. The http port is active ( SMICM )
    Pls note the error is  500 Internal Server Error  
    regards
    Nisar

    I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
    This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
    1 Check Table Space is enough. ---i had installed server recently & very few interface running.
    2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
    3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
    Try restart the java stack(XI Server) and follwing services.
    com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
    com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
    basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
    regards
    Nisar

  • Errors when writing metadata to files on Windows Server

    Good day!
    I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
    My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
    I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
    The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
    Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
    I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
    It looks to me like a timing related issue.
    Any ideas?
    (After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
    Any ideas?
    Yuval

    I Yuval
    I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
    Do you have solution to this? Or are you stuck as I am?
    Cheers, Chris

  • Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

    We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
    The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
    Any help would be appreciated.
    Thanks!
    Rich Oliver

    Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue.  I think it might be a timing issue with how lightroom interact with a slower write delay using network shares.  I suggest you also chime into this thread:  Lightroom 5 can't write metadata to DNG files   I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

  • Error when writing to interface table for HR

    We recently did a client copy from Production to our User Testing client. User was trying to enter time via transaction CAT2 but received the following message when attempting to save the timesheet:
    "Error when writing to interface table for HR"
    Does anyone have advice on how to resolve this issue?
    Thanks as always!

    Hi,
    We have the same problem.
    We tried to add many records to HR via a job but it result with en error message LR036 (Error when writing to interface table for HR)
    Did you find a solution since your problem appear ?

  • Error: In language EN, the internal unit of measure DA is not maintained.

    hi
    i am doing subcontracting operation and when i try to convert the PR into p.o in co02 the system gives this error
    In language EN, the internal unit of measure DA is not maintained.
    how can i solve this error...

    Hi,
    There are couple of things..
    1. PR to PO Creation is not with T.Code: CO02.
    2. It seems you are working on Multi Global environment.
    Ask your Basis Team to do the Language imports for UOM.
    Regards,
    Siva

  • Itunes 9.2.1.5 "Error when writing file C:\program files\apple software....

    Got an error message when installing itues 9.2.1.5 "Error when writing file C:\program files\apple software update\softwareupdate.exe you do not have admin right to read/write the menu." "寫入檔案時發生錯誤 C:\program files\apple software update\softwareupdate.exe 你沒有權限存取目錄"
    There is no "apple software update" folder in my C:\program files\
    I tried to uninstalled all apple related software, restart the computer and reinstall the itunes, I still get this error message.
    It appears that the installation of quicktime was successful.

    After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

Maybe you are looking for