Error: while accessing an adaptive rfc 2 model

Hi All,
When i select Adaptive rfc 2 model and then search for the BAPI/FM , you find the one with green ones and also the yellow ones .I selected the Fm that shows with yellow triangle icon and when
i do that i get an error :
Error while creating model classes, operation aborted.
Can any one help me out?
Regards,
Edited by: Deepa Tekumalla on May 14, 2009 4:16 PM

Hi,
Are you facing the issue for all function modules?
Yellow icon is for not-released function modules and Green icon is for released function modules.
But, the function module can be called irrespective of whether there is a green or yellow icon.
Try releasing the function module at R/3 side.
Regards,
Vaibhav

Similar Messages

  • Error while importing a Adaptive RFC Model

    Experts,
    I am trying to import an Adaptive RFC Model. Before importing I need to speciy the connection parameters in the import wizard. I am using the single server method to connect and have specified all the parameters correctly. I have not specified a SAP router as I am using a test system. when I click next on the Model import wizard I get an error.
    The trace shows-
    [code]ConnectionFailed Exception : com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=test833, GWSERV=sapgw00, ASHOST=test833, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host 10.3.82.177, service 3300)
    TIME        Fri Jun 29 08:54:18 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi_r.cpp
    LINE        8715
    DETAIL      NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUN
         at com.sap.ide.jcb.core.service.connection.internal.ConnectionManager.connect(ConnectionManager.java:220)
         at com.sap.ide.jcb.core.service.connection.internal.ConnectionManager.connectToSingleServer(ConnectionManager.java:206)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.internalConnectToServer(SAPLogonPage.java:1769)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.access$2300(SAPLogonPage.java:46)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage$9.run(SAPLogonPage.java:1730)
         at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
         at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:98)
         at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.block(ModalContext.java:136)
         at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:261)
         at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:758)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.connectToServer(SAPLogonPage.java:1699)
         at com.sap.ide.jcb.core.wizardpages.SAPLogonPage.performFinish(SAPLogonPage.java:1805)
         at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelWizard.initializeReimporter(ModelWizard.java:1410)
         at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelWizard.performPostSapLogonPageForReimport(ModelWizard.java:1433)
         at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:85)
         at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
         at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
         at org.eclipse.jface.window.Window.open(Window.java:563)
         at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.reimportModel(ModelEditorCallback.java:218)
         at com.sap.ide.webdynpro.service.modeleditor.ModelService.reImportModel(ModelService.java:207)
         at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.reImportModel(ServiceWithUI.java:120)
         at com.sap.ide.webdynpro.tsmodel.application.actions.ReimportModelAction.run(ReimportModelAction.java:11)
         at com.sap.ide.webdynpro.projectbrowser.actions.PBReimportModelAction.run(PBReimportModelAction.java:77)
         at com.sap.ide.webdynpro.projectbrowser.actions.PBDevelopmentObjectAction.runInternal(PBDevelopmentObjectAction.java:80)
         at com.sap.ide.webdynpro.projectbrowser.actions.PBDevelopmentObjectAction.run(PBDevelopmentObjectAction.java:61)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=test833, GWSERV=sapgw00, ASHOST=test833, SYSNR=00
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host 10.3.82.177, service 3300)
    TIME        Fri Jun 29 08:54:18 2007
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi_r.cpp
    LINE        8715
    DETAIL      NiPConnect2
    SYSTEM CALL SiPeekPendConn
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUN
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
         at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1125)
         at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
         at com.sap.ide.jcb.core.service.connection.internal.ConnectionManager.connect(ConnectionManager.java:216)[/code]
    Can someone tell me problem..
    Thanks in advance,
    Vineeth

    In service file if entry is not there... give the enty like
    <b>sapgw<Inst.No>       33<Inst.No>/tcp
    sapgw<Inst.No>s      48<Inst.No>/tcp</b>
    where <Inst.No> = System Number of your R/3 system(00 or 01...)
    In host file....
    ip of the server                            name of the server....

  • Error while creating a Adaptive RFC Model

    Hi all,
    I am trying to create a Model using a Adaptive RFC Model, I assign a Model name and the logical system names, enter the details in SAP Logon Information for the Single server,here it gives me a Gateway error. What could be the issue here?
    NB: In the Host Name , I tried with both the Host name of the r/3 server and also with the SAProuter string ( as we have the server at other place) ,still it doesnt work. and I am able to login to the R/3 system from the SAPLogon GUI from my desktop normally.
    Is there any issue of the firewall related to this, if so whats the port number that should be opened so that i can connect to the r/3 system get the list of BAPIs present there into my Webdynpro application .
    Need help on this
    Regards,
    Vijay

    Hi Lohi n Gopi ,
    I have checked out with the your given suggestion of trying with the host name as well as  IP address and also typing all the details,without copy pasting the details . In both the cases it gave the " Connect to gateway failed " error mesg.
    But one intersting thing here that i observered when trying with hostname, IP address, or SAProuter string is as follows .
    <b>with IP address</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="ipaddress",GWSERV=sapgw10,ASHOST="ipaddress",SYSNR=10
    LOCATION CPIC(TCP/IP) on local host
    ERROR      patner not reached(host "ipaddress",service=3310)</i>
    <b>with SAProuterString</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="SAProuterString",GWSERV=sapgw10,ASHOST="SAProuterString",SYSNR=10
    LOCATION SAPRouter on " some HostName"
    ERROR      hostname unknown</i>
    <b>with HostName</b>
    <i>Connect to SAP gateway failed
    Connect_PM GWHOST="hostname",GWSERV=sapgw10,ASHOST="hostname",SYSNR=10
    LOCATION CPIC(TCP/IP) on local host
    ERROR      hostname "hostname " unknown</i>
    Is there any firewall port blocking issue here ?if so , whats the port that needs to be opened ?
    Appreciate your help.
    Thnks,
    NR

  • Login failed error while importing an adaptive RFC model

    Hi there,
    I am trying to import a adaptive RFC model for a BAPI from a 46D system, to which I have connected using VPN from my WAS J2EE server. I have given the login details as Single server(Not load balancing), and given the user login details. However, I am not able to proceed further because it gives me the error 'Name or password is incorrect, please re-enter'. This is strange because I am giving the correct name and password, and I am able to login to this system through SAP GUI using same logon credentials.
    I am confused as to what it is expecting to move forward. I have tried changing case of the user name, restarting my WAS etc. The client is correct, and the login language is EN.
    Could anybody have any clues or have you faced a similar problem?
    thanks in advance,
    LM

    I have had the same problem.
    I think whoever programmed the logon routine at that point should be fired immediately and banned from programming for life! Logging on is a very basic and well-understood task, and programmed gozillions of times since 1940s. Common sense and unwritten rules of programming dictate simply if you make something case-sensitive, then you should accept an input in its original form (i.e. password in smalls, or whatever) but not change it to uppercase and then work case-sensitively. Either this, or you program everything case-insensitively.
    Fire that programmer or give him to us gollumvoice

  • Adaptive RFC model connectivity to SAP R/3 4.6 B

    We are developing a new webdynpro application which uses the backend R/3 version is 4.6B using Adaptive RFC model.
    We are able to connect to Web As systems without any issues but getting error messages while creating the Adaptive RFC model to R/3 4.6 B system as backend.
    Appreicate your help.
    Message was edited by: Udaya Chada

    Hi ,
    I think SLD,s/w Catalog and Creating Logical Systems were Configured,
    Go through the Following Steps Like,
    -- General Data, Enter the Client of the System and Client No. (JCo Connection is Pointing to)
    --J2EE Cluster, Select the J2EE Cluster you wish the JCo destination to be assigned
    -- Select the Destination Type, Either Application/Dictionary data
    -- Appl.Server, You may only select Servers/Logon Groups From the Drop down list that have first been defined as technical Systems in SLD.
    -- Message Server, Application Data JCo destination is connected must have atleast one logon group.( if this is not done ,use SMLG transaction code to create in SAP System)
    --Security, If you have selected connection Type as Application Data , then in the Security Screen you would appear Authentication Techniques and select a appropriate one .
    if you have selected connection type as a Dictionary meta data then provide User Name and Password
    If this is useful to you ,don't forget to award Points
    --Venkat

  • Why SLD for Adaptive RFC Model?

    Hi,
    Is it necessary to configure the settings in SLD in order to run an adaptive RFC Model or does one have alternatives?
    Because, while defining an adaptive RFC Model in NW-Dev-Studio, one does explicitly enter the SAP Log on information.
    Regards
    Meesum

    Hi,
    SLD is required to run the RFC application.
    At design time there is no dependency on SLD and we are not going to specify SLD details during the model import.
    Runtime will pickup the connection info from ContentAdminstrator where we will point to SLD.
    Regards, VIP

  • Error while using Adaptive RFC model

    I am  using adaptive RFC model to consume a function module from BI system. The function module expects a Boolean input. While executing the function module we need to give u2018Xu2019 for that input. When I consumed the function module in the webynpro java project , used it and give the input as u2018trueu2019 on runnig the application it gives the following error: u201Ccom.sap.conn.jco.ConversionException: (122) JCO_ERROR_CONVERSION: Cannot convert a value from type java.lang.Object to CHAR at field I_READ_ATTRu201D
    There is corresponding dictionary type created called u2018BOOLE_Du2019 but I could not access the dictionary type in the controller java file.
    Is there a way to rectify the same or any workaround condition?
    With regards,
    Sougato.

    Hi saurabh,
    I need to give the value from webdynpro. Hers is the sample code.
    rssem_Cha_Values_Get_Input.setI_Read_Attr();
    // It expects a boolean value but if i pass a value to the method the obove error is show.
    Where as there is a simple type "Boole_d" generated when i consumed the RFC in the webdynpro.
    but i couldn't access this simple type in the code.
    With regards,
    Sougato.

  • Error while creating adaptive RFC model

    Dear All,
    I am trying to create Adaptive RFC model by  which i can fetch data from R/3 trough BAPI and display on the webDynpro UI.
    I am getting error
    Exception: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "640.0.55" but required at least version "640.0.76".)
    Kindly suggest.
    Thanks
    Ashish

    Hi,
    Check this link....
    com.sap.mw.jco.JCO$Exception (104) RFC_ERROR_SYSTEM_FAILURE

  • Error in Import Adaptive RFC Model

    Hi SDN,
    I am trying to develop an application using Import Adaptive RFC Model, while creating a model i could not able to connect to the backend system after giving the single server parameters. When i click on the next button a pop up is displayed with an error message *"User Name or Password wrong" *.
    But i could able to login to R/3 with the same userid and password from SAP logon pad.
    Really i am at Six and Seven's to trace out this error. Please suggest me how to overcome this error and create the model succesfully.
    Regards
    Basha

    Hi Praveen & Chaitanya
    Thanks for your quick response and informative threads.
    Actually in order to import an adaptive rfc model
    I have right clicked the model node to create a model and given the model name,package name,model data and metadata names and clicked next button. Then in the next screen
    Tab Strip -> Single Server:
    Host name :
    System Number :
    client details:
    Tab Strip -> Load balancing:
    System :
    Message Server:
    System Name:
    Group:
    (in Tcode: SLMG i have added the group public also)
    client details:
    After entering the required details either in Single Server or Load balancing and clicked the next button  I could not able estabilish a connection to the backend R/3 and get the list of Bapi's or RFc's. Instead i am getting a pop up message "User Name or Password Wrong". I could not able to proceed from here.
    But with the same above parameters i could able to logon to R/3 from SAP Logon Pad. I have tried by giving the user name in Cap's and small letters but no use.
    As i was strucked at the intial step while creating the model but not during the execution of the program, as far as my knowledge is concerned i think we no need to worry on SLD or JCO connections during the creation of the model. Please correct me if i am wrong and suggest me to rectify the error.
    Regards
    Basha

  • Reimporting of Adaptive RFC model

    Hi all, I have added two fields in the BAPI and i have reimported the Adaptive RFC model in Web Dynpro.
    After running the application and accessing the new fields, i am getting this exception.
    java.lang.ArrayIndexOutOfBoundsException
         at com.sap.mw.jco.JCO$MetaData.getType(JCO.java:10161)
    What could be the reason?

    Hi,
    As the error states MetaData.getType it seems that the new changes are not yet reflected in the J2EE server. You need to restart your engine once. You can search this forum for a workaround  by Valery which doesnot need a restart.
    Regards
    Ayyapparaj

  • Adaptive RFC Model - disconnectIfAlive()

    Hi,
    In my Web Dynpro application, I am using Adaptive RFC model and executing the RFC as below
    ZRfc_Test_Input input = new ZRfc_Test_Input();
    // set input
    input.setParam1("xxx");
    input.setParam2("xxx");
    input.execute();
    My application works fine for couple of days and suddenly I get an error that
    "com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:Could not create JCOClientConnection for logical System: WD_TEST_MODELDATA_DEST - Model: class com.test.TestModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!"
    Our basis guys are unable to figure out why the SLD is misbehaving suddenly. If we restart the SLD, everything will be fine for next couple of days.
    I just want to make sure that it is not happening due to my application or due to the way the RFCs are being executed.
    After I execute my model, do I have to explicity disconnect the connection using below statement?
    <b>input.modelInstance().disconnectIfAlive();</b>
    Do I have to do this even when I am using Adaptive RFC model?
    Default min and max number of connections are used while creating JCO destinations.
    Appreciate your input.
    Thanks
    Kumar

    Hi Siva,
    >>> It is always better to close the connection after executing the RFC<<<
    Thanks for the response. I am sorry for being adamant, I agree that it would be nice to disconnect but IS IT MANDATORY? If the pool size is increased appropriately, doesn't web dynpro runtime takecare and disconnect the connections after the execution.
    In SAP tutorials and help.sap.com (at least the ones I have gone through), it is never mentioned any where that one MUST close the connections EXPLICITLY after the execution. All these days I am under the impression that it is not needed for Adaptive RFC models. I may be wrong.
    Could you please confirm if we should close the connections explicity?
    Thanks
    Kumar

  • Dynamic JCo Connection with Adaptive RFC Model 2

    Hi gurus,
    I'm trying to dinamically change a model data connector inside my web dynpro. I'm using an Adaptive RFC Model 2 to communicate with the R/3 backend. I've found that is possible to change the connector modifiyng the code inside the web dynpro. In detail I've found this example:
    IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
    I put this code into wdDoInit method but I get the following error:
    "<comp_name>.wdDoInit failed to create or init instance of model 'model_name' in scope NO_SCOPE with instanceId 'null'"
    Furthermore I've used the deprecated Adaptive RFC Model and when I instantiate a model, ModelName m=new ModelName(), I see that the methods m.setJcoClient(client) and m.setSystemName(systemName) are visible, while when I try to do the same with Adaptive RFC Model 2, with my model m, the methods before there aren't.
    So this is my question: is it possible to change data connector dinamically with Adaptive RFC Model 2?
    Thanks a lot

    Dear Lukinho,
    You may try this ;
    try {
    IWDJCOClientConnection clientCon =  WDSystemLandscape.getJCOClientConnection("<name of the JCO connection>");
    String clientName      = clientCon.getClientName();
    String lang          = clientCon.getLanguage();
    String passowrd          = clientCon.getPassword();
    String sysID          = clientCon.getSystemIdentifier();
    String user          = clientCon.getUser();
    //etc...
    } catch (WDSystemLandscapeException e1) {
    // TODO Auto-generated catch block
    e1.printStackTrace();
    I got this code from the thread   [Multiple Client Logon in JCO   |Re: Multiple Client Logon in JCO;
    Also have a look at this thread
    [JCo Destination   |Re: JCo Destination;
    Hope it helps!!
    Warm Regards
    Upendra Agrawal

  • Using an Adaptive RFC Model from JSP

    I'm trying to use an Adaptive RFC Model I created for use in our Web Dynpros from a Portal Application project. I've created 2 DCs:
    1. A Web Dynpro DC, only containing the imported Adaptive RFC Model. The model has been added to the public parts.
    2. A Portal Application DC, with the model DC added as a DC usage (along with the other required DCs)
    Now, everything appears to work from inside NWDS. The dot operator works while editing my JSPDynPage class, and everything builds fine, but when I deploy and test in the portal, I get "package not found" errors on the actual JSP. I assume this is because the JSP is compiled at run-time. How do I expose these classes to the JSP compiler?
    It's seems like using the same method to call BAPIs in Web Dynpros and Java iViews would be a good practice following SAP's "reusable code" policy, so there must be a way to do it...

    Jonathan,
    Adaptive RFC Model works correctly only when running inside WebDynpro container. JSP runs outside container (in regular J2EE WebApplication container).
    The error you receive is due to missing run-time references to container classes.
    Actually, what you are trying to do is dead end, sorry.
    Use SAP Enterprise Connector instead of Adaptive RFC model. Generated connector classes works from any environment. Also they are sooo similar to Adaptive RFC that you'll even not mention a difference.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • Error while using DB Adapter in BPEL process

    Hi All,
    I am getting error while using DB Adapter in BPEL process
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
    I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
    I am not able to solve this.
    Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • LDAP users Faicng Error While Accessing the ESS Iviews in Portal

    Hi,
    My Portal is SAP EP 7.0 SP20 And ECC 6.0 SP16.
    UME users able to access the ESS MSS Iviews.But only one LDAP User only access ESS/MSS Iviews Other getting the Below error.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.     
    Please contact your system administrator     
    Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE     
    Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
                    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
                    at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:205)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
                    at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
                    at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
                    at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
                    at com.sap.pcuigp.xssutils.navi.FcNavigation.onInit(FcNavigation.java:314)
                    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigation.onInit(InternalFcNavigation.java:358)
                    at com.sap.pcuigp.xssutils.navi.FcNavigationInterface.onInit(FcNavigationInterface.java:145)
                    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface.onInit(InternalFcNavigationInterface.java:142)
                    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface$External.onInit(InternalFcNavigationInterface.java:278)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
                    at com.sap.pcuigp.xssutils.roadmap.VcRoadmap.onInit(VcRoadmap.java:188)
                    at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmap.onInit(InternalVcRoadmap.java:162)
                    at com.sap.pcuigp.xssutils.roadmap.VcRoadmapInterface.onInit(VcRoadmapInterface.java:153)
                    at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface.onInit(InternalVcRoadmapInterface.java:144)
                    at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface$External.onInit(InternalVcRoadmapInterface.java:220)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
                    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
                    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
                    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
                    at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
                    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
                    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
                    at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
                    at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
                    at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
                    at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193)
                    at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
                    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
                    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
                    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
                    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
                    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
                    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
                    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
                    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
                    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
                    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
                    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
                    at com.sap.pcuigp.xssutils.xssmenu.model.MenuModel.hrxss_Ser_Getmenudata(MenuModel.java:171)
                    at com.sap.pcuigp.xssutils.xssmenu.model.Hrxss_Ser_Getmenudata_Input.doExecute(Hrxss_Ser_Getmenudata_Input.java:137)
                    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
                    ... 76 more
    Thanks & Regrads,
    Subba Rao

    Hi,
    Now every user facing the same error while accessing ESS Iviews from Portal.
    in ST22 Dump is created.
    What happened?                                                                                |
    Error in the ABAP Application Program
    The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program
    "CL_XSS_CAT_BUFFER=============CP " in include
    "CL_XSS_CAT_BUFFER=============CM00C " in
    line 50:
    ""L_CATSDB" and "L_CATSDBCOMM" are not mutually convertible. In Unicode"
    " programs, "L_CATSDB" must have the same structure layout as "L_CATSDB"
    "COMM", independent of the length of a Unicode character."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
    terminated because it has
    |    come across a statement that unfortunately cannot be executed.
    What we need to resolve the above issue.
    Thanks & Regards,
    Subba Rao

Maybe you are looking for

  • Robo HTML 9 will not open our project from Source Control after initial start.

    We have a project in version control that we have been using forever, since 2003 or so and many versions of RH.  Now that we have upgraded to 9, this project will open the first time in version control and work normally.  Once you close the project a

  • Ho wto view deleted items in a sales order

    is there a way to view deleted items in sales order.? is there a change log that we can view? how can we see the change  log   of any document? thanks s. krishnan

  • TS1702 iBooks will not download at this time

    It is trying to update, but will not download. It is not paused, and it cannot be deleted. It is shaded--lighter in color, and I can't open it from the home screen, but it will open a PDF from my email, etc. very frustrating. I am working on an iPad

  • G50-70 line in middle of LCD

    Hi,I have Lenovo laptop G50-70 and I have a problem that there is sometime one or more line in middle of the LCD and its removed by pressing screen from the bottom lightly. My question is that what component is needed to be changed in the LCD so this

  • Library cannot be read created by a newer version of itunes

    My itunes updates went haywire.  So, I uninstalled itunes.  Then read somewhere to also uninstall software update, mobile device support, bonjour, and application support.  I did all, rebooted and reinstalled Itunes.  Now I get a message that says Li