Error while accessing container element _ALERT_LOGICAL_SYSTEM
Hi,
Getting below error in SLG1 T.Code, I, am getting E-Mail but without any ALERT ID, MESSAGE ID and Interface name pls suggest for the same to solve.
"Error while accessing container element ALERTLOGICAL_SYSTEM" ERROR IN SLG1
Rgds,
MFH
Did you checked this thread: Alerts problem and log
Regards,
Abhishek.
Similar Messages
-
Error while using container element _WF_PARFOREACH_INDEX in workflow
Hi All,
I am using internal container element WFPARFOREACH_INDEX in internal table so that i can use it as index to read table row one by one..but in binding i am getting error "Container element '_WF_PARFOREACH_INDEX' does not exist" in form of an example.
Can someone tell me that how to get rid of this error in binding? I am using this element variable to achieve parallel branching in workflow.
Regards,
SumitHi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal -
Error while creating container Element in WF
Hi,
I have created a container element with field vbeln, and specified an initial value. Created mail step and activated it. I have given the mail subject and content as "value given : &vbeln&". When I try to test this I couldn't find the container element in " Input Data" tab of the Test Data and getting the message as "Contnr elem. VBELN is for read purposes only. No values are assigned to it."
Could anyone suggest me to correct this, because I am new to WF.
Thanks,
AAHi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal -
InvalidSecurity Error while accessing Webservice
Hi,
I am getting an "*InvalidSecurity*" error while accessing webservice.
Below is the error, which I got while invoking the webservice :
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault
xmlns:ns0="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<faultcode>ns0:InvalidSecurity</faultcode>
<faultstring>InvalidSecurity : error in processing the WS-Security security header</faultstring>
<faultactor/>
</env:Fault>
</env:Body>
</env:Envelope>
Thanks
Abheek
Edited by: 1005832 on May 14, 2013 6:16 AMThe error was generated on the endpoint and indicates that the SOAP request message had incorrect WS-Security information in its headers. The SOAP response message you included doesn't contain specific information about what is wrong (we wouldn't want to reveal too much to hackers, of course!).
Without seeing the SOAP request message and the WS-SecurityPolicy that the endpoint requires, it's impossible to tell what's wrong.
Other important information:
- what version of WLS are you running?
- is the endpoint a WLS JAX-WS or a WLS JAX-RPC web service?
- is WS-Security configured using native WLS WS-Security (e.g. @Policy) or using OWSM WS-Security (i.e. @SecurityPolicy)?
- what specific policy is being used to enforce security at the endpoint (the advertised WSDL for the endpoint should contain this) -
Error while accessing Oracle E-Business Suite 11i from Linux/firefox
error while accessing Oracle E-Business Suite 11i from Linux/firefox
OS: SUSE Linux Desktop 11(SLED11)
Web browser: firefox 3.x
Java versions:
# rpm -qa |grep java
java-1_6_0-sun-plugin-1.6.0.u18-0.1.1
java-1_6_0-sun-1.6.0.u18-0.1.1
# java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Server VM (build 16.0-b13, mixed mode)
when I access the url firefox says
"Additional plugins are required to display all the media on this page"
then I clicked on "Install Missing Plugin" button
then I got the following message
No Suitable Plugins were found
Unknown Plugin (application/x-java-applet;jpi-version=1.4.1)
please help/suggest
RegardsHi user;
Its not certified to login EBS from linux client
Please check:
Linux-cleint (ebs) certification
pluggins
Hope it helps
Regard
Helios -
Error while accessing discver report
Hi,
I am getting error while accessing a shared report from my colleague.
1)Item "Project Overview Project Type" used by the workbook is missing. Would you like to continue
2)Item dependency "not found in the EUL. Attempt to open workbook failed.
Could you please give my the workaround for this.
Thankshi,
the link is:
Discoverer
Regards
Cosimo -
Error while accessing secure store
Hi Team,
We are on EP 7.0 on SQL server 2005 . Iam facing one problem , in sometimemy IRJ pOrtal site stops giving error " Java iView Runtime " .At this time what happens that in my usr/sap drive , the sap folder is not shown as shared its share goes away and that time when i connect to visual admin tool the authentication fails and that time config tool gives error
#1.5#00188B417A01007E0160B338000008FC00045DE876A4C303#1229152911187#com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl##com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl#Guest#2####f168def0c8c411dd9a2100188b417a01#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Plain###ManagedConnectionFactoryImpl.createManagedConnection(): SQLException occured while creating ManagedConnection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
musaprd
sapmnt
PWC
SYS
global
security
data
SecStore.properties" does not exist although it should..#
#1.5#00188B417A010085015AAAF5000008FC00045DE876A4C207#1229152911187#com.sap.sql.connect.OpenSQLDataSourceImpl##com.sap.sql.connect.OpenSQLDataSourceImpl#Guest#2####09e36ed0c8c711dd93b200188b417a01#SAPEngine_Application_Thread[impl:3]_39##0#0#Error#1#/System/Database/sql/connect#Java#com.sap.sql_0019##Exception of type com.sap.sql.log.OpenSQLException caught: Error while accessing secure store: File
When i check in this path SecStore.properties is there , also i have checked the permissions .....................please revert the reason of this error .
Main part of this all is that after taking a reboot everything becomes fine , this happens every few days .
Please revert to this .
Regards,
SomyaHi,
This error crops up when the the folder usr/sap folder sharing is lost . We have recently faced this problem this is Windows OS level problem you can ask your OS admin. Applying a security patch will do.
Regards,
Vamshi. -
Error while accessing secure store: File "SecStore.properties" does not exi
Hi ,
I have a java desktop application, and i am trying to get a connection from a datasource deployed on one SAP AS Java, I can get the datasource succsfullly but when i try to get a connection from the DS, it throughs this exception, I put the secstore..properties file in the classpath even after that it is not happy,
any solution/hint/light please!!!!
com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "SecStore.properties" does not exist although it should..
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
at com.sap.customcode.ConflictingActionFixture.(ConflictingActionFixture.java:53)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at fit.FixtureClass.newInstance(Unknown Source)
at fit.FixtureLoader.instantiateFixture(Unknown Source)
at fit.FixtureLoader.instantiateFirstValidFixtureClass(Unknown Source)
at fit.FixtureLoader.disgraceThenLoad(Unknown Source)
at fit.Fixture.loadFixture(Unknown Source)
at fit.Fixture.getLinkedFixtureWithArgs(Unknown Source)
at fit.Fixture.doTables(Unknown Source)
at fit.FitServer.process(Unknown Source)
at fit.FitServer.run(Unknown Source)
at fit.FitServer.main(Unknown Source)
Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "SecStore.properties" does not exist although it should.
at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
... 18 more
caused bythe SecStore.key file was not there, I changed the passwd and checked the 'Encryption' on, after that my sever instance is not starting.
Any idea?
-Puneet -
Error while accessing table from procedure but no error from anonymous plsq
Hi All,
I am getting a strange error while accessing a table from a different schema.
In that concerned schema OWBSYS, i executed the following:
grant Select on wb_rt_audit to ods;In Ods schema i executed:
CREATE OR REPLACE SYNONYM wb_rt_audit FOR OWBSYS.wb_rt_audit;In ODS schema, when i execute:
create or replace
procedure pp_test as
lv_owb_reject number := 0;
lv_filename_1 varchar2(200):= 'asda';
begin
SELECT MAX(aud.rta_iid) into lv_owb_reject
FROM wb_rt_audit aud
WHERE aud.rta_lob_name LIKE Upper(lv_filename_1)
end;
/I get the error:
Warning: execution completed with warning
procedure Compiled.
ORA-00942 - TABLE OR VIEW DOES NOT EXISTHowever, when i execute as an anonymous plsql the same code:
declare
lv_owb_reject number := 0;
lv_filename_1 varchar2(200):= 'asda';
begin
SELECT MAX(aud.rta_iid) lv_owb_reject
FROM wb_rt_audit aud
WHERE aud.rta_lob_name LIKE Upper(lv_filename_1)
end;
anonymous block completedthere is no issue.
Can someone help me understand what I might be missing:
Edited by: Chaitanya on Feb 28, 2012 12:31 AMCheck if have some other steps.
SQL>conn scott1/tiger
Connected.
SQL>create table wb_rt_audit (rta_iid number);
Table created.
SQL>insert into wb_rt_audit values (100);
1 row created.
SQL>insert into wb_rt_audit values (200);
1 row created.
SQL>commit;
Commit complete.
SQL>grant select on wb_rt_audit to scott2;
Grant succeeded.
SQL>conn scott2/tiger
Connected.
SQL>create synonym wb_rt_audit for scott1.wb_rt_audit;
Synonym created.
SQL>create or replace procedure pp_test as
l_number number(10);
begin
SELECT MAX(rta_iid) into l_number
FROM wb_rt_audit;
end pp_test;
Procedure created. -
Access Denied Error while accessing "Site Settings Access requests and invitations"
Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, PalHello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari -
Error while activating query element.
Dear All
Can any one tell this error .
When iam transporting the queries to BI production there is an errror in Transportation log that error while activating query element.
But the querysis fine in Bi quality.
Error : Error while activating "6899QYGVHJPGYUBLKA9SPHORZ".Hi
Might be that query element was deleted(not used n was used before in dev) while creating cross check once in your query.
First check what is that element which is not transported?
use table RSZELTDIR to find out weather its a Var or CKF or RKF etc...
then check for the same in the query in QA weather its active and ported fine to QA if not try to collect the element and transport to QA in a separate request.
Regards
KP -
Error while accessing public holiday calendar
Friends,
Well when creating a work schedule for the year 2008 (practice mode - at home) i am getting the below message..
I checked all the configurations and no where i mention about 2009. Any tips and suggestions.
Error while accessing public holiday calendar
The function module HOLIDAY_CHECK_AND_GET)INFO has generated an errorfriends the problem still exists..
i created a new calender, new dws, pws, bws.. but again the same error comes in play.
Friends,
Well when creating a work schedule for the year 2008 (practice mode - at home) i am getting the below message..
I checked all the configurations and no where i mention about 2009. Any tips and suggestions.
Error while accessing public holiday calendar on 20090101
The function module HOLIDAY_CHECK_AND_GET)INFO has generated an error -
Error while accessing public holiday calendar on 20120101
Dear All,
When I'm posting PL(Personnel Leave) against 31.12.2011 it is working fine but If I'm posting a Sick Leave against 31.12.2011 or CB the error is coming like "Error while accessing public holiday calendar on 20120101".
Please suggest what to do.Dear All,
When I'm posting PL(Personnel Leave) against 31.12.2011
it is working fine but If I'm posting a Sick Leave against 31.12.2011 or
CB the error is coming like "Error while accessing public holiday calendar on 20120101".
Please suggest what to do.
the error clearly saying that you dont have holiday calendar for 01.01.2012,, so please change it using PT02 to avoid the error.
then you check what exactly system is doing.
you have to create a wsr with one month extra validity than the exact periods required to avoid the future errors as you are getting now.
system always takes one month extra validity it is standard functionality.
regards,
mohammed -
Error while accessing public holiday calendar on 20100101
Dear Gurus.
When i was created Work Schedule TC-PT01
Error Showing
"Error while accessing public holiday calendar on 20100101"
Message no. P2518
Diagnosis
The function module HOLIDAY_CHECK_AND_GET_INFO has generated an error.
Please Advised
Regards
MHPOHi
As Surisetti told that, that public holiday might not created in that year. So check the same in SCAL and again re-generate the work schedule.
Thanks & Regards
Bharathi -
"Error while accessing porting layer for ORACLE database via getSessionId()
Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
... 90 moreActually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
... 90 more
Maybe you are looking for
-
Letter of credit in import - customization and user steps
Hi we want to use foreign trade module to track letter of credit in import. we want to track LC status with limits and validity dates. but in cockpit (ENLO) we are not getting vendor selection. it is only customer selection available. please let us k
-
Script label: Set and get it?
Hi How can I set and get the script label of a frame in my plugin? Thanks for the help. Best regards Hans
-
Manual Reorder point planning stock is not showing in MD04
HI, Would any one help me when i plan for reorder point planing the details furnished below. Mrp type: V1 Lot size :HB ROP : 30 Max stock level :1000 in Material master settings.But when i run the MRP using MD03 system is not showing available sto
-
What is Apple doing about the "Unable to download" problems?
So, forgive me if these questions have been asked before. But I am new to Apple, just bought an iPhone about 2 months ago. I love my iPhone, but once you start getting into the world of the App store is where the problems seem to start flooding in. S
-
My Retina Macbook Pro died due to a hardware error. During the diagnosis I was asked by Apple support personnel to format and reinstall OSX, which I did but did not fix the issue. The mainboard has since been replaced and I am trying to restore the T