Error while Activating all the objects?

Hi Ravi,
two suggestions:
1) Delete and import new without automatic generating (a-d)
2) Fill in dummy values in a-d; then activate change list, then delete a-d
Regards Mario

Hi,
The follwing are the standard adapter created:
<i>a. GeneratedReceiverChannel_HTTP
b. GeneratedReceiverChannel_IDOC
c. GeneratedReceiverChannel_RFC
d. GeneratedReceiverChannel_XI</i>
If you are not using the above adapters and have not updated them with allt he paramters. You should delete them and then change the activating list.
Regards
Vijaya

Similar Messages

Error while activation of ODS Object.

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

don't post same issue twice. Bhanu working on your thread.
check this ...
Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Error while activating all inactive infoobjects in DEV

Hai
Im trying to activate all inactive infoobject by using program RSDG_IBOJ_ACTIVATE. But it says the following error
<b>System error in lock management
Message no. AD025
Diagnosis
A system error has occurred in the lock management function.
The system was unable to determine whether a lock entry existed for the selected object.
System Response
The selected object could not be locked.
Only display mode can be used.
Procedure
Make a note of the error code and inform your system administrator.</b>
why it is like this
how can i activate all inactive infoobjects in development server.
kumar

Hi,
It seems objects are locked in transport request. Check the 'object directory entry' for the object and find out the transport request/task under which objects are locked. Remove the objects from TR or release the request and then try to activate.
Hope it helps.
Regards,
Aditya

Error while activating ABAP proxy object

Hello,
I can see all the interfaces of PI7.0 in my ECC6.0 system.
I am able to create abap proxy object of a interface.
But when I try to activate that I am getting error as
"RFC system error for destination GTADIR_SERVER".
Pl can you suggest. appreciate quick help in this.
thanks in advance,
Sharada

Hi,
For more details take a look at note: [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
To get rid of this annoying error you have to implement the corresponding support package.
Regards,
Jakub

Middleware error while Generating all Required Objects(SMOGTOTAL)

Dear Experts,
I am trying to establish Middleware setup between CRM2007 and ECC 6.0.
When i am trying to Generate all Required Objects in CRM by using T.code SMOGTOTAL
when i checked Status of Generation Job by using the Tcode GENSTATUS we are getting an error saying
"/1CRMGC/CGCUST_TG_WRITE_DTC:The data object "<FS_DTC>" does not have a component called "GROUPNO"."
http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=SMOGTOTALerror.jpg
see the above link for detail error with screen shot
Could you please tell me what could be the problem.
Thanks & Regards
V.Srinivas

Hi
Reason:
Based on the generation it will be decided to add the field
GROUPNO to the generated database table. If the table has been generated once, the generation will step over it each time afterwards.
That means, after doing changes regarding that, the generation will not
create the table again.
=> In the first generation run the error has occurred (I don't know why).
So in all other generation runs afterwards it has not been corrected.
Then you have to removed the generated table and run the generator
DATA_COLLECTOR_TABLE of the generator group "Data Collection Service".
Afterwards, the table will be created with the field GROUPNO
Hope this will solve your prob.
Regards
Rao

Error while activating Data Store Object

Hi Guru's,
When I try to activate a data store object i get the error message :
     The creation of the export DataSource failed
     No authorization to logon as trusted sys tem (Trusted RC=2).
     No authorization to logon as trusted sys tem (Trusted RC=2).
     Error when creating the export DataSource and dependent      Program ID 4SYPYCOPQ94IXEGA3739L803Z retrieved for DataStore object ZODS_PRA

Hi,
you are facing a issue with your source system 'myself', check and repair it. Also check if the communication user (normally ALEREMOTE) has all permissions needed.
kind regards
Siggi

Error While activating 0Material(BI7)

Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arun

Dear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun

Error while activation of mapping

Hi experts,
i am getting folowing error while activation of the mapping object. Checked the cache and updated it .
there are no locks by any user also
Version management was unable to execute the last action because a temporary internal lock has been set. Repeat the action
please help if you faced similar issue.
Regards,
srinivas

Hi,
Did you have a chance to look at this thread?
Internal lock version management : Unable to copy objects
Regards,
Ravi

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Access dynamic attributes BPM; error while activating the process in sxi

hi everybody,
I have to access dynamic attributs in a BPM condition. I thought I could achive this when I click the radiobutton "contextobject" in the condition editor.
When using the value-help button on the contextobject a huge list of objects is shown for selection.
Strange to me is that also the radionbutton "interface-variable" is checked. I can not uncheck this radiobutton. But this makes the error while activating:
"Containerelement 'IDOC_'MyContainerelement'{XSDSIMPLE::xsd:string;SHeaderSUBJECT:ht' does not exist".
Has anybody expirience using the dynamic attributes/contextobjekts in BPM?
Thanks, Regards Mario

Hi all,
it seems to be impossible to access the attributes:
Technical Context Object in ccBPM
Regards Mario

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating the copy of the standard module

Hi,
I wanted to create a copy of the module material_read_all and so I copied the entire function group.
Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
The same thing is happening with other modules also which I am trying to copy.
Can anyone please help me with this.
For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
It is very very urgent.
Thanks in advance
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

Hi,
I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while Activating all the objects?

Similar Messages

Maybe you are looking for