Error while activating BI statistics Process Chain

Hi,
I have faced the problem below. Please advise.
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
T

hi
go to table RSLDPIOSH enter the infopackage technical name you have mentionned.
take note of the OLTPSOURCE name
then go to rsds replicate and activate.
After that take the technical names of the process chains go to business content installation and reactivate theses chains (with option only necessary objects)
This will solve you issue
The reason of your error is the following, some master data datasources from the bi statistics business content is delivered in 3.x and some other with 7 therefore you have a mix up with the dataflows.
bye
Boujema

Similar Messages

Error while activating data in process chain

Hi All,
Am getting following error msgs in process chain while activating the data store object variant
1.Cannot activate request 0000015195(REQU_78CEI406HFCMG85RWNSKW6HW4) of DataStore object RC2SCD10
2.Activation of M records from DataStore object RC2SCD10 terminated.
Any help how to resolve this error.
Regards
Sirisha.
Edited by: sirisha gupta on Dec 29, 2008 10:16 AM

hello,
firstly see if the DSO and the transfomration, DTP are all active.
or
This can be due to the incorrect data record in ods
find that record in PSA correct that one and then try to run the load fro PSA to Data target.
or
Uncheck "SID's Generation upon activation" in DSO's settings.
or
you can also try by changing the "Parallel Processing" to "Serial Processing".
In the maintenance screen of DSO, select "Requests" tab:
Click on the "Activate" button at the bottom
Click on the "Activate in Parallel" button
Change the "Number of Processes" to "1" for Serial Processing
Save the setting
You should see the "Activate in Parallel" button with a cross icon now.
Check SAP Notes: 1118205 & 947481
refer:
DataStore object Activation
reg,
dhanya

Error while Transporting changes in Process chain

Hi All,
I have added a Hierarchy InfoPackage in Process chain and added this InfoObject in Save hierarchy and Attribute change Run Process types.
My transport Request is showing only three entries each for
save hierarchy , attribute change run and one for Process Chain.
Now when I transport this changes to Process chain to Acceptance its showing Error message in Acceptance as
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Process variant LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 does not exist in version A
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
InfoPackage   no longer exists in object version A in table RSLDPIO
Results of check for process LOADING ZPAK_4AY55YMC1H454OQWJUBNJCYE9 in chain ZMDH_HTS:
Variant 'ZPAK_4AY55YMC1H454OQWJUBNJCYE9' of process type 'LOADING' not found in A version
Errors occurred during post-handling RS_AFTER_IMPORT for RSPC L
The errors affect the following components:
   BW-WHM (Warehouse Management)
My question is , Why the Transport request is not transporting the InfoPackage.
Is there any solution for this?????
Thanks in Advance
Best Regards
Pratap Sone

Hi Pratap,
       The infopackage has not yet been assigned to a package in all probabilty. Change the package and then transport the IP and then transpost the process chain request.
Regards.
Edited by: Ansel D'Souza on Sep 8, 2008 7:31 AM

Error while Activating a process chain

Hi,
I have just modified the existing process chain with the new info package for loading into ODS and then delta update into the Info Cube.
when i am clicking on the option schedule and activate.
Its giving error as :
"InfoPackage ZPAK_49RJW545FSO2MB3NF1MIZ9NJ9 is
generated; NOT able to be used as loading variant"
This is a IP, which is used for delta update from ODS to cube.
I have checked the IP, its fine like i can do the delta through this pacakge manually.
Please help, points will be rewarded....

Dear himanshu arora ,
Go and check whether the Info Package exist ,
You can check in Rsa1 and give IP name and find it.
If your IP is not there please create it,
If tehre please check the all parameter associated with it.
Also go through these
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Process chain creation - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
Data Load errors and Process chains
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
ope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope it helps
Regards
Bala

Access dynamic attributes BPM; error while activating the process in sxi

hi everybody,
I have to access dynamic attributs in a BPM condition. I thought I could achive this when I click the radiobutton "contextobject" in the condition editor.
When using the value-help button on the contextobject a huge list of objects is shown for selection.
Strange to me is that also the radionbutton "interface-variable" is checked. I can not uncheck this radiobutton. But this makes the error while activating:
"Containerelement 'IDOC_'MyContainerelement'{XSDSIMPLE::xsd:string;SHeaderSUBJECT:ht' does not exist".
Has anybody expirience using the dynamic attributes/contextobjekts in BPM?
Thanks, Regards Mario

Hi all,
it seems to be impossible to access the attributes:
Technical Context Object in ccBPM
Regards Mario

Error while activating DTP in BI 7.0

I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.

Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK

Error while activating multiple requests in ODS.

Hi All,
I get a "ORA-12801: unable to extend temp segment" error while activating an ODS. The problem is I selected 7 requests for activation and my Basis guy tells me he cannot add any more files to the temp tablespace.
I guess the solution would be to re-activate one request at a time. However now the dependency has been enforced between the requests and I cannot activate a single without selecting the other requests.
I even, subsequently, selected "Do not condense option..." AND the "Process Request serially" options. I get the same error.
Is there a ABAP report that can turn off this inter request dependency ?
Thanks.
Dorothy.

Thank you for the quick reply !
Dinesh: I looked at the note. It applies to oracle systems < 9.2.0.6. We are at 9.2.0.6. The paramter COMPNOMERGE is missing in RSADMIN table. The note however is right on the money for the problem I am experiencing.
Bhanu: I applied your suggestion. The test yielded no errors.

Error while Activating ODS data

Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LS

hi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted.

Error while activating MSMP BC set

Hello,
I am getting this error while activating MSMP BCSETS
@5C@ GRC_MSMP_CONFIGURATION V_GRFNMWCNESCTYP Entry SAP_GRAC_SPM_AUDIT_REVIEW does not exist in GRFNMWCNPRCS (check entry) 001SAP_GRAC_SPM_AUDIT_REVIEW AGENT @35@
Thanks,
Prasant

Hi,
I have seen that error when activating the BC-set also. But iI recall that I have nto had any bad affect from it and was able to configure and get GRC AC 10.0 working fine.
From what I could gather and understand, that error comes up as some of those entries are activated with blank entries, which makes sense as you would not have activated certain MSMP processes yet.
I suggest carrying on activating the BC sets and configuring the tool and see how things go. Hopefully you wont have any issues.
All the best.

Error while activating Trnasfer rules

I am getting the following error, while activating Infosource. Can you please help me identifying the solution
Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
Diagnosis
"ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or ...

Hi,
Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
1. Drop the Source System
2. Re-Create the Source System.
3. For other than PC Files, "Replicate the DataSources" in the Source System.
4. Try mapping the transfer rules / structure and activate it.
Also check the SAP Note no :147195
Hope this works.
Regards
Pavan Prakhya

Error while activating 0FIGL_O02 ODS

Hi ,
It showing error while activating 0FIGL_O02 ODS .I have already allowed all special character "ALL_CAPITAL,.<>?/:;"{}[]||=-)(*&^%$#@!~`"'-_,ALL_CAPITAL_PLUS_HEX",but it's still showing error in particular field 0DOC_HD_TXT .
Errror:Value 'AMITBHANDARKAR ' (hex. '41004D00490054004200480041004E004400410052004B0041
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
What is the error in this name.

Hi rajesh ,
While activation and creating the SIDs the system will perform the sanity check which will ensure to throgh th error if u trying to load some lower cse letter to IO which doent have the u lowercase check box as checked. You can edit the IO then and also proceed with saveen suggested by processing all capital.
Thanks,
Deepak

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error while activating DTP : database returned a value containing an error

Hi ,
I am getting an error as "The database returned a value containing an error"
while activating the DTP. Can neone suggest any solution for this error .
The system is also not allowing to delete the DTP and giving the same error as above one .

Are you receiving a similar error as below from the log:
Creation of PSA /BIC/B0001995 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4DGGKC0NCCP394FEOOSQC68Y3
If yes then look into SAP Note 1145673 - Extracting from InfoProviders with navigation attributes. Application of this note should resolve the issue.

Error while activating queue XBTI*

Hi All,
When I triggered the message i have seen the message in Green Color in MONI.
there by i went to SMQ2 and have seen the message that is strucked in the queue XBTI0001.
After that i have deleted the queues from SMQ2 and De-registered the queues and Registered the queues again. in SXMB_ADM
There by i Activated the Queues in the same screen.
then i got the Error as Error while activating queue XBTI
What could be the problem with this activation
REgards

Hi Prateek,
That activation and all is working now,
but the problem is iam trying to restart the successfully processed messages in MONI through
this Blog
Michal Krawczyk's Blog
The specified item was not found.
Every thing has been followed as explained in the Blog.
I took the message ID of the Successfuly processed message from MONI and when i execute the report.
Each and every time The message is comming to MONI with GREEN Status .
Then if i goto SMQ2 , ther i can see the queu with the description saying that SYSFail
and if i manually trying to release the Queue means it is saying Running and immediately turning into the same SYSFail state
The queue is not at all getting Free.
This is the problem
Regards

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating BI statistics Process Chain

Similar Messages

Maybe you are looking for