Error while activating Business Content
Hi!
I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
"InfoObject 0KN_USE is not available in version A"
I've marked the infoobject 0KN_USE to be installed..
Any ideas of how to proceed?
BR
Bjørn
Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version
Similar Messages
-
OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content
Hi
Error occured while installing business content
ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
Please help me how to resolve the issue
Regards
ASRHi,
Check in SDN... becasue there are n number of resons for that..
/thread/1056689 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
Thanks
Reddy -
Error while activating BI Content infocube - 0IMFA_1(IM: Assigned Plan Bud)
Dear All,
While I am trying to activate the Business Content cube 0IMFA_1(IM: Assigned Plan Budget (Operative) ) with Collection Mode 'Automatic' and Grouping ' In dataflow bef and afterwords', I am getting the following error -
" Object 0IMPLAN (Currency Translation Type,CTRT) could not be collected for object 1308CQ25VCD0H9UCVDTKXM7BB (Query,ELEM)
Message no. RSO296
Diagnosis
You have collected objects in the BI Metadata Repository. Associated objects for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM have also been collected. Object 0IMPLAN of type Currency Translation Type,CTRT was among these objects.
However, this object 0IMPLAN of type Currency Translation Type,CTRT is not available in the metadata repository.
System Response
Object 0IMPLAN of type Currency Translation Type,CTRT is ignored in further collections. The links for object 1308CQ25VCD0H9UCVDTKXM7BB of type Query,ELEM are incomplete. This may result in you not being able to activate this object.
Procedure
If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example. "
I am unable even to find this object.
Kindly let me know how to solve this issue.
Many Thanks in Advance,
With Warm Regards,
VineethThe log says, infoobject 0IMPLAN is not available in Metadata repository.
To make sure, RSA1--> BI Content --> Object types --> under InfoObject (middle window), double click 'Select Objects' and search for infoobject '0IMPLAN'. (in ur system its not available).
What u have to do is:
Either collect object by selecting Grouping ' In dataflow before' , so that u can insatll all backend objects and do the data loads.
Then, install frontend object,by selecting Grouping ' In dataflow afterwords'
OR
Since u have selected Grouping ' In dataflow bef and afterwords'...
After the collection is over, from right most window, select 'Query elements' --> right click --> Donot install any below
Do the same for BEx web template, Web Items, Querey Views, workbooks etc -
Error when activating Business Content
Hi Ladies/Gents
I get this error when activating BC: "Element 4EHBH4SLF21UQ1UFOHVN4SZVJ is missing in version D"
I have successfully activated HR: Personnel Admin Data Targets and ETL structures. I also loaded master data to all I/O's and transaction data to the Cubes. I am now activating the queries and when I activate just the first query I get this error. I have searched everywhere for this element that is missing but can not find it. The query that I am trying to install is: "Number of entries". Note that some of the other queries were installed successfully.
Thanks!Hi,
This element is not available in "Number of entries" query. Try to check in query designer where this element is there in query or not.
Also try to reinstall this query from Business content
Regards
Sangita -
Error while installing Business Content SD Cubes
Hello BW Guru's,
I am installing the business content for the sales overview infocube with the grouping option data flow before & later sometime it says that backgorund programm was been modified.
I checked it in st22 its showing an dump with the status msg LOAD_PROGRAM_LOST error.
What could be the problem? how to resolve this issue?
Please through some inputs on this issue....
Points Asssured.
Urs,
RK.Hi,
The LOAD_PROGRAM_LOST error occurs when there are two
or more versions of a given program loaded into the buffer at any given time. This happens when the program is changed by one user while it is still in use by another user.
When a user gets to the program that is having this problem and R/3 attempts to load the generated version from the buffer, it sees that the version is not the most current and tries to swap it out for the most current, but the load was lost from the pxa buffer, hence the dump of LOAD_PROGRAM_LOST.
To correct the error you need to run tranx SAMT & regenerate the program(s) that are listed in the dump. You can then do a $SYNC in the OK code field in the affected applciation server, but the other application servers should not be running. After the $SYNC, the other app servers can be brought up and the
buffers should then be in sync.
Hope this helps,
Regards
CSM Reddy -
Error in Activating Business Content
Hi all,
When trying to activating the technical content infosources from business content , I am getting the error "DataSource 0TCTAGGRST_TEXT from source system BWDCLNT200 could not be activated" , I have checked the source system everything seems to fine.
ThanksHi,
did you goto sbiw in BW to activate the BCT datasources and the application hierarchy first? If not, this should be the first step.
regards
Siggi -
Can we get Transformation rules while activating Business content
Hi Gurus,
I am trying to install business content for the cube 0SD_C05 in BI 7.0. I have selected in dataflow before and afterwards, but I am getting that as Bw 3.X flow like update rules and tranfer rules. Is there any option that I can get the business content installed in BI 7.0 flow, like I need the transformation rules and all.Please advise.
Kind Regards,
RaghuHi,
While activating the BI content it will ask for the Datasource type to be extracted.There you need to specify in 7.0
Now as you have extracted,you can migrate the same.
Go the datasource>rt clk>migrate>with export>after migration>replicate the DS>activate and create transfor mation...
Hope this helps
Cheers,
Shana -
Error in Activating Business Content in SPP
When we tried to Activate the business content for SAP SPP(using RSA1), We received the ABAP runtime error - OBJECTS_OBJREF_NOT_ASSIGNED. The error message is as follows.
Error in the ABAP Application Program The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Any suggestions how to rectify this?Thanks for the update. It helped. We could transfer and istall the required infoobjects, infosources and infoareas.
We could also transfer the update rules, but the tansferred and installed 'update rule' is being shown as 'inactive, not executable'. Any idea how to fix this?
Thanks,
Prashanth -
Errors while installing Business Content
Hi,
It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
Now when I am trying to install I am getting these errors
Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1
Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
InfoPackage no longer exists in object version A in table RSLDPIO
There many errors of this type.
How to solve the problem. Please help me.
Thanks in advance.
JaswanthaHi Jaswantha,
Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
This is as per my observations so far according to SAP Best Practices.
Pls. try this and get back.
Hope it helps
Regards
PPMM -
Error while installing business content.
Hi Guys,
I am trying to install busineness content for 0BPARTNER. while i am installing i am getting the below error.
InfoObject 0CUST_CLA is used in transfer rules (M) of characteristic 0BPARTNER
Please help me to take the action to correct this error.
thanks in advance
peter bHi,
Please check 0CUST_CLA this infoobject is activated or not if not pls active that.
http://help.sap.com/saphelp_nw70/helpdata/en/a2/2af638350d5654e10000000a11402f/frameset.htm
Regards,
Madhu -
Error while Activating Tech Content in SPRO
Hi All, I am trying to install Tech Content & Admin Cockpit. I am following the recommended steps(OSS 934848). When I run the RSTCC_ACTIVATE_ADMIN_COCKPIT, it errors out & gives following message:
E:RS:062 0TCTBWOBJCT_TEXT BWU-010 A
We are on SP12 & BI content 7.03 sp5.
kindly help!
Regards
PKHi,
Try to simulate the program in SPRO before executing.
First Try out in the given order, one by one
1. Activate SAPI Data source
2. Replicate data sources only
3. Replicate data sources along with repair missing Info packages.
4. activate techinical content.
Try this activities in simulation mode.
if u find any errors like data source is not available or inconstancies in infopackages etc
U need to delete the inconsistant objects manually or u can also manually install some of data sources which throws error messages.
Go through the note 1074229, 1039381
Regards,
Srinivas. -
Error While activating business process in sxi_cache
Hello,
I get following warning in TX: sxi_cache, when I try to deploy a integration process.
Conversion From '[NN.]' to '[XC.ZXI_PROXY_VV2_STATUS_ABS_0001]' Can Cause Data-Dependent Errors
Any ideas what's the cause for this warning?
Regards ChristianHello,
I've checked the process in integration directory and repository. Result: No error and no warnings.
If I go to TX: SXI_CACHE -> Integration Process -> Select Process -> Repeat Activation -> Deployment
I get following warning:
Conversion From '[NN.]' to '[XC.ZXI_PROXY_MI_RECEIVE_CONT_0001]' Can Cause Data-Dependent Errors
I don't understand that warning.
Please advise.
Best reagards
Christian -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul... -
Hi,
When I execute Incremental or Full Crawl I get 17000 error and only 1 success.
The error is:
Error while crawling LOB contents. ( Access denied by Business Data Connectivity. )
I went to Central Admin > Security > Specify Web application Policy > Search for the service account for crawl and it's "svc_SPSearch"
I went to Central Admin > Application Management > Manage Service Application > BDC Service > I select all the affected external sources > then Set Object Permission in ribbon > Added "svc_SPSearch" with execute rights > then
kick incremental crawl...
After this I still get 17000 error, 1 success.. Still an error.
I am not sure how the crawler's trust to FAST infrastructure works.
Your response is appreciated. Thanks!
-FranI have the same issue.
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
Regards
Maybe you are looking for
-
TS1389 How can I transfer songs from one ipod to another?
How can I transfer songs from ipod to another?
-
I cannot video chat keeps telling me "There was a communication error
during your chat. ichat encountered errors while communicating with participants in this chat. Your can send details about the problems to Apple to help improve future versions of iChat" We are both using AIM and used to be able to communicate via iS
-
SDO_Relate and SDO_filter with SDO_Join
Hi all, Could someone please help me in finding the difference with the below query I am comparing SDO_Relate and SDO_filter with SDO_join. Query using SDO_Relate and SDO_filter SELECT count(spa1.id) FROM temp_tab tmp_tab, spatial_tab spa1, spatial_t
-
Trouble with 10g after Installing Grid Control
Main problem: after installing Grid Control and rebooting, I can no longer access my databases. I have 10g installed on a fairly decent Windows XP machine. It was running okay, but I had two Oracle database instance processes running at 200mb of RAM
-
Application Server cannot render arrow line style?
I am using MapBuilder(10.1.3.1) to create a line style with arrow. It rended perfect in MapBuilder. The xml style is below: <?xml version="1.0" standalone="yes"?> <svg width="1in" height="1in"> <desc/> <g class="line" style="fill:#000000;stroke-width