Error while activating cube contains non cumulative key figures

Hi all,
when i am trying to activate a cube which contains non cumulative key figure it is showing out the following error:
DDIC Object TABL /BIC/LZATTR1NON has not been activated
Table /BIC/LZATTR1NON could not be activated
Please let me know if any one come across with such error
Help are appreciated

Before activating an infocube with non-cumulative keyfigures, the system
design forces the user to enter at least once the screen: maintain
non-cumulative values (validity table). If that step has been performed, activation will work fine.
In the meantime, please do this step explicitly, at least once, when
configuring such an infocube, then you should not have any problem.
Please follow the same process while activating the infocube
Goto Infocube ->Goto Change mode->Menu ->Extra-> goto the screen:
maintain non-cumulative values once.
Walter Oliveira.

Similar Messages

Error when activating Cube with Non-cumulative KF

Hi all,
I'm trying to re-activate an InfoCube but now with non-cumulative KF and I'm getting the error message "Object YYYYY could not be activated".
Please help!
Best regards,
Thiago Modro

hi,
have you included the neccessary time characteristics
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Ramesh

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

How to create a non-cumulative key figure & How to make a info cube as so

Hi Experts,
How to create a non-cumulative key figure & How to make an info cube as non-cumulative cube?
Can any one kindly provide me the steps we need to performe?
Thanks in Advance,
Raj

Hi Azael,
In the How to Papers, you will find a Guide on how to take a Sanpshot view of the Stocks(How To Handle Inventory Management Scenarios in BW). Basically if you implement the Guide, you will have another cube called ICSNAP1, which will contain stock quantities /values at the end of each month. You will therefore have to take stock at the end of the last month from that cube and add up the relevant receipts and issues to arrive at the current Stock or Stock as on a particular date.
Hope this helps!
Regards
Sriram

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. This cube is defined by me to test the non-cumulative key figure.
In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Regarding Non-Cumulated Key figures

Dear All,
I wanted to create Multiprovider which includes infocube having Non-cumulative key figures .When I am including that Non-cumulative key figure in the Multiprovider , I am getting an error "Inconsistencies were found when checking MultiProvider ZMULTIPTP"
detail fo this error is
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hello,
See this Validity table for non-cumulatives in a self defined cube
Thanks
Chandran

How to display Non Cumulative key figure data

Hi,
I want to check if there is any data for a non-cumulative key figure. While i am trying to display the data from cube or Multi provider, it is not showing this field. is there any way to check the data for this field other than using reports.
Regards,
Vishnu

Hi,
Take Eg: Quantity of valuated stock - 0VALSTCKQTY it is combination of
Quantity Received into Valuated Stock- 0RECVALSTCK and
Quantity Issued from Valuated Stock- 0ISSVALSTCK
In report you can see only 0VALSTCKQTY Keyfigure.
And the above Two Keyfigures are filling by Routines using Process Keys.
This is for 0IC_C03 and data you can check in MB5B Tcode in ECC.
Check;
Note 745788 - Non-cumulative mgmnt in BW: Verifying and correcting data
Thanks
Reddy

Include non-cumulative key figure in InfoSpoke

Hi Experts,
I am trying to create InfoSpoke for AR Line Item Cube(0FIAR_C03) with all infoObjects.
This includes non-cumulative key figures such as
0DSCT_DAYS1 (Days for first cash discount)
0DSCT_PCT1 (Percentage for first cash discount)
However, InfoSpoke run failed and following messages is displayed.
Error in SQL Statement: SAPSQL_ILLEGAL_AGGREGATE NOP
Does the infoSpoke not support non-cumulative key figures?
It worked fine when I remove all the non-cumulative key figures from the InfoSpoke.
*I certainly set 1 for 0RECORDTP(Record Type) in the selection tab as SAP Help instructed
Thank you for your answers in advance.

Try OSS Note Number: 850428.

Non Cumulative Key Figures Simple

Please Help me with this.
I have the measurement Amount "0meas_value" non cumulative key figure and
aggregation properties Sum and Last value and other key figure is 0meas_chg
cUMULATIVE KEY FIGURE. aggregation properties Sum and summation. Now my question if I map the field from R3 Datasource (MEASVALUE) to CUMULATIVE key figure 0meas_chg, will it me a mess??? , Since when i try to put "0meas_value" non cumulative key figure in infosource it gives the error that you cannot put the non cumulative keyfigure in infosource. Please tell how can i then map to non cumulative key figure.?? and if I do not map what will be the problem??
Technical name: 0MEAS_VALUE (Non Cumulative)
Use
This key figure contains the measurement amount of a real estate object on a given key date. The key figure is used for analyzing changes to the real estate portfolio.
and
Technical name: 0MEAS_CHG (Cumulative)
Use
This key figure contains the change to a measurement on a given key date. The key figure is used for analyzing changes to the real estate portfolio.
Technical Data
Aggregation
SUM
Exception Aggregation
SUMMATION
Cumulative/Non-Cumulative Value
Cumulative value
Thanks
Soniya

This kind of issue is difficult to analyze.
Basic approach would be:
1. make sure your BIA revision is the latest.
2. check Tcd: RSDDBIAMON2 and make sure there is no red light
3. rebuild the BIA Index and try again.
Regards,
Patricia

Where is it save Non-Cumulative Key Figures

Hi Gurus,
Someone knows, what is the table where is it saves Non-Cumulative Key Figures. Specially i like to know, about the inventorys (Total Stock).

Hi,
What praveen said it is correct, when u r creating the non cumulative kf we can see the inflow and outflow in aggrigation tab there we r giving both things and in cube level activating in top we will store the settable their we should mention on which basis do u want inflow and outflow should be there like either calday or calmanth or if it is material number wise we can give.
thanks
k.sathish

Non-Cumulative Key figure with inflow & outflow

I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.

Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy

Snapshot scenario or non cumulative key figure in inventory management

Hi
We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100 000 stock movement lines per day (we are retailer!).
Is there somebody to give me advice about it?
Tanks a lot
Anne

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Bad performance with non-cumulative key figures

Hi All,
I have a cube with 8 non cumulative key figures based on fiscper.
I am not sure how the performance for reporting with non-cumulatives can be improved.
Thanks
Karen

Performance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
For actual stock, the more you compress the better it is.
Regards,
Fred

Trouble with Non Cumulative Key Figures

Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.

As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps.

InfoProvider with non-cumulative key figures

what does infoprovider with non-cumulative key figures...
noncumulative key figures..
looking for reply

it's property of the KF... nothing do with Cubes or ODS.
Name itself telling non-Cumulative KF. We can't cumulate this KF. Suppose take the Case Sales Amount and No of Employees. Sales Amount can be cumulated over Time. But No Employees can't be cumulated. Same is the Case with Stock as well.
Nagesh Ganisetti.

Error while activating cube contains non cumulative key figures

Similar Messages

Maybe you are looking for