Error While activating Cube
Hello All,
I have designed a cube containing cummulative and non cummulative key figures.
When i checked it it shows that "Cube is consistent".
But while activating this cube i am getting following Errors:
1) Table /BIC/L* could not be activated.
2) Enhancement Category for table Missing.
3) Specify a primary key for the table /BIC/L*.
Please let me know if some extra settings need to be done if we include non Cummulative KFs in the cube.
Reagrds,
Pratighya.
Hi,
for enhancement category check the following links
Warning Enhancement category for table missing
Error Message: Enhancement category for table missing
Enhancement category for table missing error
check the above ones clear it if the problem still persists let me know
Regards,
MADhu
Similar Messages
-
Error while activating cube contains non cumulative key figures
Hi all,
when i am trying to activate a cube which contains non cumulative key figure it is showing out the following error:
DDIC Object TABL /BIC/LZATTR1NON has not been activated
Table /BIC/LZATTR1NON could not be activated
Please let me know if any one come across with such error
Help are appreciatedBefore activating an infocube with non-cumulative keyfigures, the system
design forces the user to enter at least once the screen: maintain
non-cumulative values (validity table). If that step has been performed, activation will work fine.
In the meantime, please do this step explicitly, at least once, when
configuring such an infocube, then you should not have any problem.
Please follow the same process while activating the infocube
Goto Infocube ->Goto Change mode->Menu ->Extra-> goto the screen:
maintain non-cumulative values once.
Walter Oliveira. -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Run Time error while activating the cube 0pp_c03
Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
RohitHi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa. -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while activating Infocube
Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED Error/warning in dict. activator, detailed log --> Detail
GREEN Activate table /BIC/DDPCW14DFD1
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN A table called /BIC/DDPCW14DFD1 exists in the database
RED No active nametab exists for /BIC/DDPCW14DFD1
RED Termination due to inconsistencies
RED Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN Error number in DD_DECIDE (9)
YELLO Flag: 'Incorrect enhancement category' could not be updated
GREEN Table /BIC/DDPCW14DFD1 was not activated
GREEN Activate table /BIC/DDPCW14DFD2
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
MohnishCan i know in which environment are you working? BW 3.5 OR BI 7?
-
Error while activating DTP in BI 7.0
I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul... -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.
Maybe you are looking for
-
Node names of siblings in xslt
I have following xslt code <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="*"> <root> <xsl:for-each select="*/*">
-
Problems updating iPOD with iTunes.
My library has 4800 songs and iTune starts the update process normally. At some point through the process, the ststus bar will say "Ok to disconnect iPod" and nothing has been transfered. I also noticed that bottom of of the screen indicated the disk
-
I've been having problems deploying a TestStand project. When the installer gets created, the filenames in the destination end up getting truncated. Everything is fine during the analysis, but after a build, it's garbled. It even is reflected in t
-
Hi Gurus, I want to change menu bar "Detailed Navigation" in BI Admin Cockpit - System administrator -> Monitoring. Could you explain to me how to find the technical name of this Web Template?
-
Is it possible to upgrade Metadata Repository running on 9.0.1.5.0 database to 9.2.0.4.0 without installing new 9.2.0.4.0 database and running Metadata Repository Creation Assistant?