Error while activating DataStore Object

Hi Experts,
I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
"DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
Below is the dump:
Error in the ABAP Application Program
The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN================CP " in include
"CL_RSTRAN_TRFN================CU " in
line 159:
"Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
Message was edited by: SAP BI

Are you using transformations/DTP to load the DSO??
I am not sure if this helps
Note 961556 - DataStore (activation): Columns are initialized without rule
Note 974833 - DataStore (activation): Columns initialized without rule
Hope it Helps
Chetan
@CP..

Similar Messages

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Error while activating the object from change list in IR

Hi Friends,
I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
Regards,
Suresh.

Hi Suresh,
have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
Best Regards
Sven

Error while activating ODS Object

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Error while activating info objects.

Hi,
After activating the data in ECC rsa5 and replicating it in BW rsa1, when i am trying to activate the infoobjects in object types i get the following error.
*DataSource 0RF_ARTHIER_ACT does not exist in source system DVMCLNT110 of version A *
kindly help me.
thanks.
- rohit mulay

Hi Rohit,
you can activate the datasource by using 'RSDS_DATASOURCE_ACTIVATE_ALL'program
Please follow bellow steps:
1.Goto SE38>give the Program>click on Execute.
2. Give the technical name of Datasource and Execute.
Note: there is one check box, first execute with that checkbox checked and see, if that didnt work, uncheck the checkbox and execute, hope this should solve your problem.
3. Replicate the Datasouce in BI side.
4. Activate the relavent Objects indevedulally.
Regareds,
Suman

Error while activating Data object in DOE workbench

Hi all,
I created a Data Object and when I try to activate that DO it is showing an error as below.
Mobile Java client attributes not maintained.
Please give some clue to resolve this.
Thanks and Regards,
Rajesh.A

Hi Rajesh,
I believe you had created an SWCV that is enabled for Backward Compatibility 'Uses NW04/NW04s MI application' and created a Data Object in this SWCV. Ideally, when the SWCV is enabled for Backward Compatibility, the Data Objects should be created by importing the text file as Data Objects from a MI 7.0 server. Since you have not done that way, you are getting this error.
I would suggest that you create a new SWCV and do not check the option 'Uses NW04/NW04s MI application'. Now create the Data Object again and try to activate it and you should be able to activate it.
Best regards,
Vinodh

Error while activating any object

Hi Everyone,
I m have strange problem with bi sever.
When ever i try to activate any object in system goes in debugging mode.
Can any one tell y dis happening.
did i activated some setting ???
/sachinkumar.

Hi,
I think Some one Swithced on Break Point.
In Debugging mode take that program name and go to SE38 Click on Brek Point icon it will remove break point.
Please let me know whether it works or not.
Regards,
Shivu.

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while activating DataStore Object

Similar Messages

Maybe you are looking for