Error while activating DTP in BI 7.0
I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.
Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK
Similar Messages
-
Error while activating DTP : database returned a value containing an error
Hi ,
I am getting an error as "The database returned a value containing an error"
while activating the DTP. Can neone suggest any solution for this error .
The system is also not allowing to delete the DTP and giving the same error as above one .Are you receiving a similar error as below from the log:
Creation of PSA /BIC/B0001995 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4DGGKC0NCCP394FEOOSQC68Y3
If yes then look into SAP Note 1145673 - Extracting from InfoProviders with navigation attributes. Application of this note should resolve the issue. -
Hi,
I am trying to activate a DTP in Q.
But it shows me Error Message no. RSO404 which says that an active version already exists.
But when I see the DTP, the execute option is greyed out and it is inactive.
How do I remove the already active version ?
Is there any function module which can automatically make the previous verions inactive and make the latest version active.
Infact, same error message appears even when I try to create a new DTP and activate it.
Kindly help.I tried to create another full DTP but it showed the same error.
You can create multiple Full DTP's.
You can delete a Full DTP even after loading data with the same.
Jr - can u elaborate that I cant delete a DTP unless the target contents are deleted.
You cannot create multiple Delta DTP's.
Once you load data using a Delta DTP you just cannot delete the Delta DTP as it maintains the delta pointer based on requests. It can only be deleted after deleting all data loaded by it in the target.
Meanwhile, this issue is fixed. Actually one of my teammate was able to activate it at the very first attempt.
Executing an inactive DTP will activate it in the process before the loading job kicks off.
Did you try to activate ? May be you have no auth....did you friend executed it...or may be he has auth.
We are on SP13 as well. -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while Activating the Standard DSO
Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya. -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A -
Error While activating 0Material(BI7)
Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arunDear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun -
Error while activating Infocube
Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED Error/warning in dict. activator, detailed log --> Detail
GREEN Activate table /BIC/DDPCW14DFD1
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN A table called /BIC/DDPCW14DFD1 exists in the database
RED No active nametab exists for /BIC/DDPCW14DFD1
RED Termination due to inconsistencies
RED Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN Error number in DD_DECIDE (9)
YELLO Flag: 'Incorrect enhancement category' could not be updated
GREEN Table /BIC/DDPCW14DFD1 was not activated
GREEN Activate table /BIC/DDPCW14DFD2
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
MohnishCan i know in which environment are you working? BW 3.5 OR BI 7?
-
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM -
Hi gurus,
Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
1.An error occurred while executing a transformation rule:
The exact error message is:
The argument 'EA' cannot be interpreted as a number
The error was triggered at the following point in the program
GP4D35STLXQI3SHIVNQC2FSJ7MB 791
2.The data record was filtered out because data records with the same key
have already been filtered out in the current step for other reasons and
the current update is non-commutative (for example, MOVE). This means
that data records cannot be exchanged on the basis of the semantic key.
Please guide me accordingly.
Regards
Amar.Hi
While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
(Choose Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
Hope it helps and clear
Maybe you are looking for
-
I've read through several discussions and I've seen a lot of similar issues but none that were quite like mine. Every time I plug my 3rd gen. iPod nano in it shows it connected on the iPod screen and iTunes opens up but the device does not show up i
-
Missing messages in JMS sender adapter
Hello All, We are in the testing phase of one of the our implementation porject, In which we have used JMS to IDOC scenario for WMS interfaces. But unfortunately we are not receiving all the messages in SAP PI from JMS queue. We have checked with JM
-
Can not sign in. please check your network connection and try again
Since I updated my software to 7 on my iPhone 5 today, I can not sign in to iMessage of Facetime?? I get an error message that says "could not sign in. please check your network connection and try again". My network connection is fine on every oth
-
My phone is not accepting password
All of a suddent my imessages and facetime arent working? Says its waiting for authorization. I keep putting in password and it isnt accepting it?
-
I'm having a strange problem with some sliced images I created and exported from FW to DW. Now, I am not seeing this problem in any of my browsers, but my client is, on one of her machines (IE7.0, WInXP). My IE7 displays this fine, so I am at a loss.