Error while activating expression Functional call

Hi All,
I created a functional call expression..I mainteined target function name and result object as well..The syntax check doesn't return any error messages.But when I try to activate it , I get an error message
ZCALL_FUNCTION_1 (Expression) : No active version found for time stamp 20.111.018.120.507 (Details) Display Longtext.
I activated all the subobjects..But I still I get the above mentioned error.. Could anyone please suggest me the solution..
Regards,
Raghu.

Hi ,
Please implement note 1639477.
Thanks and Regards,
Rama.

Similar Messages

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error while Activating Activate Global Funds Management Functions (PSM-FM)

Hi,
I am getting the below error while activating Activate Global Funds Management Functions (PSM-FM) in Funds Management.
Aktivierung des Haushaltsmanagements ist nicht erlaubt
Message no. ZZ003
Kindly help me in fix this issue....
Thanks
Kishore

Hi,
Thanks for your reply. But can you clarify me why we need to delete the row Z_LEAVE in SE11 for FMISPS table. Because here ABAPER is objecting to do this as they feel there may be some impact if we delete this.
Kindly clarify me
Thanks
Kishore

Error while activating function module

Hi,
I copied a standard SAP function module L_TO_CREATE_DN.
When i activated the function group it throws an error saying that " Field "I_COMMIT_WORK" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement".
All the global data has been copied properly in the TOP include but still while activating the function group we are getting the above said error.
If anyone has encountered same kind of issue.......Please guide.
Thanks and regards,
Ramesh

I was also facing the same issue, when I tried copying just 1 or 2 FM's from that FG L03B.
Finally, I copied the whole function group, including all FM's into Z FG, and FM's, and it got activated w/o any hitches. Looks like there is lot of dependency between the includes and FM's code.
Regards
Deepthi

HT203175 While trying to use my iTunes library it will suddenly stop working with the erro message Runtime error R6025 pure virtual function call. HELP!!!

While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call.
Help???

Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
STRANGE! Let me know if this works for you to!

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
 data: l_d_length like sy-index,
 l_d_char type c,
 l_d_index type sy-index,
 l oopx like sy-tabix.
 data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
 clear : result.
 call function 'CONVERSION_EXIT_ALPHA_INPUT'
 exporting
 input = tran_strucutre-XYZ -> object name in ur structure
 importing
 output = result.
 l_d_length = strlen( result ).
 do l_d_length times.
 l_d_index = sy-index - 1.
 l_d_char = result+l_d_index(1).
 call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
 exporting
 i_chavl = l_d_char
 i_iobjnm = xinfobj
 I_S_COB_PRO =
 I_T_COB_PRO_CMP =
 exceptions
 chavl_not_allowed = 1
 others = 2
 if sy-subrc <> 0.
 result+l_d_index(1) = ' '.
 endif.
 enddo.
Regards;
Jitendra

Error while activating Infocube

Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED     Error/warning in dict. activator, detailed log --> Detail
GREEN     Activate table /BIC/DDPCW14DFD1
YELLO     Enhancement category for table missing
YELLO     Enhancement category for include or subtype missing
GREEN     A table called /BIC/DDPCW14DFD1 exists in the database
RED     No active nametab exists for /BIC/DDPCW14DFD1
RED     Termination due to inconsistencies
RED     Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN     Error number in DD_DECIDE (9)
YELLO     Flag: 'Incorrect enhancement category' could not be updated
GREEN     Table /BIC/DDPCW14DFD1 was not activated
GREEN     Activate table /BIC/DDPCW14DFD2
YELLO     Enhancement category for table missing
YELLO     Enhancement category for include or subtype missing
GREEN     Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
Mohnish

Can i know in which environment are you working? BW 3.5 OR BI 7?

Error while Activating Inventory record in WM

Hi All,
I am getting an error while activating Inventory record using LI02N ,The Inventory record has been created using LICC Cycle Inventory at Quant Level.The error detrails are as below:
Message Text:
Function code cannot be selected
Technical Data
Message type__________ A (Cancel)
Message class_________ BL (Application Log)
Message number________ 001
Message variable 1____ Function code cannot be selected
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 4 (Additional information)
Sort criterion________
Number________________
Thanks you all in Advance.
Regards,
NVK

I am encountering a similar error whils tryng to create or display WM Physical Inventory documents.
Tx: LX16 - Error Message no. BL001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Tx: LI01N and LI03N u2013 Error Message no. L4001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Errors when trying to create or display PIs, but can run reports on u201CWH1u201D and configuration looks ok?
I cannot find anthing n SAP OSS for WM.
Any assistance would be appreciated.

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Hexadecimal Error while activating DSO

Hello Experts,
I'm getting following error while activating DSO. I tried ALL_CAPITAL, ALL_CAPITAL_HEXADECIMAL in RSKC. still i'm facing this problem anyone can suggest anything. Iam using BW3.x flow
Value "CC-5012 TRYPSIN/EDTA SOLUTION 100ML" (HEX 430043002D0035003000310032000A00540052005900500053) of characteristic 0CRM_ITDESC contains an error at position 8
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 8 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem.
Thanks
Ajay.D

Hi Ajay,
There are invalid characters at the specified position. Now you ahve 2 options:
1. Either edit the PSA manually and replace this invalid character
2. Use the Funvtion Module 'RSKC_CHAVL_CHECK' . Pass the data to it & get the invalid char replace it with space. This can be called in the filed level routine if the effected info object is identified .
Check out these threads:
Re: Problem with Characters that have a hexadecimal display between HEX00
Re: Invalid Characters issue
Regards
Raj

Captivate 8 - Runtime Error R6025 - Pure Virtual Function Call

My teammates and I have Captivate 8 installed recently and while working on a big project for a client, some of our files got corrupted. We couldn't open them and we'd get a Runtime Error R6025 - Pure Virtual Function Call. Some members of the team could still open those CP8 files but eventually, everyone got the error and we couldn't open the files anymore, even if they were backed up several times.
Anyone have the same problem? We are suddenly having regrets purchasing all those Captivate 8 licenses. Captivate 6 never gave us this problem and it really had to happen with a big project for a client.

Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
STRANGE! Let me know if this works for you to!

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while activating expression Functional call

Similar Messages

Maybe you are looking for