Error while activating field exit
hi all
while activating field exit iam getting error
like system is not configuted for field exit
solution is Set the abap/fieldexit parameter to YES in the system profile and restart your SAP system
then in which tcode i can set the parameter
thanks in advance
1)Login to R/3
2)Tcode RZ10
3)Select instance profile
4)click extended maintenance
5)change
6)Add parameter
7)Abap/fieldexit -> save and activate the changes.
Then restart you r/3 system.
Similar Messages
-
Error in activating Field exits
Hi...
At the time of activating field exits data element , I am getting the message as " System is not configured for
field exits " . In a default profile I also set the parameter abap/fieldexit = YES & restarts sap logon too.
Plz.. give me the solution ASAP
Thanks in advance
DeepaHi Deepa,
refer to this link
Field Exits
re: field exits
hope it helps..
Regareds! -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while activating transformation in BI 7.0
HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
SheelaHi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
Error while activating Transactional data source
I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth. -
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
Error while activating 0FIGL_O02 ODS
Hi ,
It showing error while activating 0FIGL_O02 ODS .I have already allowed all special character "ALL_CAPITAL,.<>?/:;"{}[]||=-)(*&^%$#@!~`"'-_,ALL_CAPITAL_PLUS_HEX",but it's still showing error in particular field 0DOC_HD_TXT .
Errror:Value 'AMITBHANDARKAR ' (hex. '41004D00490054004200480041004E004400410052004B0041
Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
What is the error in this name.Hi rajesh ,
While activation and creating the SIDs the system will perform the sanity check which will ensure to throgh th error if u trying to load some lower cse letter to IO which doent have the u lowercase check box as checked. You can edit the IO then and also proceed with saveen suggested by processing all capital.
Thanks,
Deepak -
Error while activating transforamtion
Hi,
Facing error while activating the transformation
Error is
: No source parameter is used.
No target field is assigned.
We are getting the data from the flat file, i had tried assiging the fields in the transformation.
but those are the amount fileds. source is comming as 17 in length but in bi it is taking 9 as length.
I had made infoobject assignment in the tranformation but it is showing the same error.
With regards,
VamsiHi Vamsi,
In the datasource,fields tab please check if the format field in set to external.
Try creating the transformation again after assigning the source field.
Hope this answered you.
-Vikram -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek -
Dear Friends,
When i try to activate my field exit using program RSMODPRF, the following message appears.....
System is not configured for field exits (see long text)
Message no. ENHANCEMENT032
Diagnosis
The system is configured wrong. Field exit maintenance will have no effect.
System Response
The profile parameter abap/fieldexit is set to YES during screen generation. A screen load is generated that allows you to branch to field exits.
This parameter may only be set in the customer system.
Note: If the parameter has been set, you must check that, for each field, the system branches to the correct corresponding function module during screen generation. For performance reasons, you should not set this parameter during generation unless field exits have actually been created for your system.
Procedure
Set the abap/fieldexit parameter to YES in the system profile and restart your SAP system.
How to solve this problem....
Thanks & Regards,
SudheerHi,
go thourgh the documentation of the program RSMODPRF..
Short text
Field Exits for Data Elements
Description
Maintenance transaction for creating and activating field exits
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirements
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Questions and answers on field exits
1. A field exit was created with the CMOD and activated, but it does not get executed when the screen is called.
Since the field exit is not executed until DCI, some action must occur in the screen (e.g. press Return, saving....).
Set the abap/fieldexit profile parameter to YES and start the system again.
After the FIELD_EXIT... function module has been activated and the field exit has been activated, the transaction in whose screen the field exit is to be executed must be terminated. The screen is not generated until it is called.
Do not work on different application servers, otherwise there may be a delay before the field exit becomes active.
The profile parameter must be set either on all application servers or on none.
If the field exit is to be active in certain screens only, then you should check whether you have selected the correct program and the correct screen number (Careful with SUBSCREENS Do not rely on the F1 information for the field!
2. How does setting abap/fieldexit affect the performance?
If a screen is generated and the profile parameter is set, then the system checks in 2 tables (TDDIR, TDDIRS) to see whether a field exit has to be generated for the field. In practice the screen load after a Put is not generated until the screen is called. The user will not experience a noticeable delay, since screen generation is extremely fast.
3. Can the contents of other screen fields be read in a field exit?
In principle all fields can be copied to global variables in the TOP or the function group. However, since the order in which the field exits are called is not guaranteed, this possibility should not be used.
4. How does the field exit work in step-loop fields?
After data input to DCI the field exit will be called as many times as fields are visible on the step-loop. The SY-STEPL system variable is incremented each time. If a new value is assigned to be field, then it will be visible in the module between LOOP. ENDLOOP. This module will also be called as many times as there are visible step-loop lines.
5. Can field exits be debugged?
No. Field exits have to be tested in isolation in the development environment. To analyze problems that occur only in the screen environment, the relevant variables can be written to the file system using TRANSFER... and can be analyzed there.
6. What should one do if the field contents are not getting transported to ABAP/4?
Check whether you have assigned a value to the OUTPUT field.
7. When does the field exit get called in the case that there is a conversion exit attached to the data element?
The field exit will be called after the conversion exit. This means that the INPUT field contains the data in the same form as that in which the ABAP/4 program also gets them.
rEGARDS -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi
Maybe you are looking for
-
Is there a way to snap cut/edited portions together on the same track rather than manually having to drag them together? To elaborate, if I have a 3 minute track of raw audio and I edit out the middle 30 seconds of it I am left with two tracks with
-
Device Connected But Not Showing Up In Network Map
Network Magic Version: 5.5.9195.0 Connection: Cable Modem: Linksys WRT54GS2 Firmware: 1.0.02 build 007, Jan 21, 2010 Problem Device: Blu-ray, wireless Operating System: Windows 7 Home Premium, Service Pack 1 Anti-virus/Firewall/Spyware: Micros
-
SAP HR-- In form 16 , i am not able take print out for all pages..
Hi, In SAP HR module , i have totally 5 pages, i need to take the printout for all pages.. but i am getting only 1 pages.pls could u solve this problem Regards senthil
-
Text subscripts/superscripts, headers and footers
Actually I am a newcomer to Keynote. There are difficulties how to write in a text subscripts or superscripts. I am a physicist and need this feature frequently. I should be also grateful to get some help how to write headers or footers (i.e. for num
-
I can't find the way to change the build settings for both architectures in xcode 4.0.2