Error while activating function module
Hi,
I copied a standard SAP function module L_TO_CREATE_DN.
When i activated the function group it throws an error saying that " Field "I_COMMIT_WORK" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement".
All the global data has been copied properly in the TOP include but still while activating the function group we are getting the above said error.
If anyone has encountered same kind of issue.......Please guide.
Thanks and regards,
Ramesh
I was also facing the same issue, when I tried copying just 1 or 2 FM's from that FG L03B.
Finally, I copied the whole function group, including all FM's into Z FG, and FM's, and it got activated w/o any hitches. Looks like there is lot of dependency between the includes and FM's code.
Regards
Deepthi
Similar Messages
-
Error while activation Function module for generic data extraction
Hi,
I have created a generic data source ZMATERIAL in which i have selected the Extraction by Function module. I copied the function module RSAX_BIW_GET_DATA_SIMPL to ZMATERIAL_FM, but when i activate this module it gives me error
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
The main program of the function "Z_BWGENDATAMATERIAL" does not begin with "FUNCTION-POOL".
Please help me in this.Hi Dipika,
I think a similar issue is discussed
Refer this thread
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
Compiling INCLUDE progam
question related to includes
question related to includes
Hope these helps
Regards
Karthik -
Type error while calling function module with in FOX formula
Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA I_CALDAY TYPE 0CALDAY.
DATA N_CALDAY TYPE 0CALDAY.
DATA KYF TYPE KEYFIGURE_NAME.
FOREACH I_CALDAY, KYF.
CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
EXPORTING
DAY_IN = I_CALDAY
IMPORTING
LAST_DAY_OF_MONTH = N_CALDAY.
{KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PMHi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu -
ERROR WHILE ACTIVATING FUNTIONAL MODULE
HI everybody,
i have created one functional module
code is correct
but at last while activating i am getting error like
'REPORT OR PROGRAM STATEMENT MISSING OR PROGRAM TYPE IS
I(INCLUDE).
COULD U PLZ SUGGEST ME HOW TO SOLVE THIS ERROR
REGARDS
HRIDHAYANJILI.Hello,
Go to the main program of the Funtion module. and do activate. Select all the deactivated programs related to Function group and then press activate.
Regards,
Naimesh -
Error while transporting Function module.
Hi guys,
A z fun. Module was already created by some user on client 150.I changed,Activated it on client 180 ,but when I transport it to production I get the follow Error when I checked in "SMTS" .Please guide.
Generation of programs and screens
Transport request___: SA3K9A14WH
System______________: SMP
tp path : tp
Version and Release: 305.12.19 46D
Generation of programs and screens for transport request SA3K9A14WH
Only generates programs with LOAD versions
Start on 27.10.09 at 04:20:54
Ended on 27.10.09 at 04:20:54
No. of programs /Min/Avg/Max (sec): 1 0 0 0
Generation of programs and screens
End date and time : 20091027042054
Ended with return code: ===> 8 <===
Selection for import 2009.10.27 04:20:33 (0) Successfully completed
Import 2009.10.27 04:20:38 (0) Successfully completed
Check versions 2009.10.27 04:20:42 (0) Successfully completed
Generation of programs and screens 2009.10.27 04:20:54 (8) Ended with errors
ment System
Checks at operating system level 2009.10.27 13:18:14 (0) Successfully completed
Export 2009.10.27 13:18:33 (0) Successfully completed
unknown
Selection for import 2009.10.27 13:18:33 (0) Successfully completedGuys I did that ,but still get the following eror.Now I can open the function module but when Executed gets error No.2
Error NO1 :In Transport Request
SA3K9A14WN RFC Wty (G-ERP)
SMP Production System
Selection for import 2009.10.27 06:09:40 (0) Successfully completed
Import 2009.10.27 06:09:47 (0) Successfully completed
Check versions 2009.10.27 06:09:52 (0) Successfully completed
Generation of programs and screens 2009.10.27 06:10:04 (8) Ended with errors.
*Error NO2 :In "SE37"
Error generating the test frame -
Error while creating Function module extracter
Hello Guru's
I am getting error while FM extracter creating.
Have created FM and Extract structure and while creating datasource using these where i am getting error as given below
1> ZV_ZFRT_INVOICES(Datasource): TABLES-paramter E_T_DATA for extractor Z_ZFRGT_INVOICES(FM) is missing
2>(DS)ZV_ZFRT_INVOICES: Field ZEILE of the provider structure is missing in extract str. ZVZFRT_INVOICES(Extract structre)
3>(DS )ZV_ZFRT_INVOICES: Field EBELP of the provider structure is missing in extract str. ZVZFRT_INVOICESExtract structre)
Please some one can help me to get out of the issue.HI Aryan,
No need to create FM on your own. You can copy the FM from Function Group RSAX.
The procedure to create FM extractor is as follows:
1) Create an extract structure.
2) Go to SE80. Select Function Group RSAX , right click and then copy.
3) Give your own name to the function group to copy.
4) Select one appropriate FM from the list of FMs provided. eg FM RSAX_BIW_GET_DATA_SIMPLE.
5)Specify the name of new FM you want to create.
6) Go to SE37 and open the FM you have created by copying from Function Group RSAX.
7) no need to change the import tab.
8) On tables tab, for paramerter name E_T_DATA under asociate name specify the name of extract structure you hav created.
9) Under source code tab make the changes in the source code only to customise it to your requirement. eg: declare the database table you are using, make changes where datasource is in picture, etc.
I have created a generic DataSource with the help of above procedure.. I hope you will find it helpful...
Regards,
Geetanjali -
Error while executing Function Module UNIT_CONVERSION_WITH_FACTOR.
Hi experts:
I'm trying to use the UNIT_CONVERSION_WITH_FACTOR Function Module on
BW but an error message appears, I searched for Notes on the SAP
Marketplace but only found a single note that describes the same
situation that we're experiencing (SAP Note 1333415), the thing is that
such a note is applicable for SAP BASIS version 702 but I'm using SAP
BASIS version 700.
Steps for Reconstruction
- On transaction SE37 call the u201CUNIT_CONVERSION_WITH_FACTORu201D Function
Module.
- Click on the u201CTest/Executeu201D button (or press the F8 key).
- Enter the following values:
o ADD_CONST = 0
o DENOMINATOR = 1
o INPUT = 20
o NUMERATOR = 1568
- Click on the u201CExecuteu201D button (or press the F8 key).
- The Exception u201CTYPE_INVALIDu201D is reached and the following message
appears: u201CUse a number field for field OUTPUTu201D.
I also tried to use this Function Module on R/3 and the result was the same.
Do you have any suggestion to fix this error?
Thanks in advance for your help,
Francisco Milán.Hi Francisco,
Check with SAP Note No. 854978.
Hope this would help you.
Rgds,
Mohit -
Error while calling function module to start form
Hello Experts .
First i make my data selection. Then i will get the name of the generated function module. Then i call FP Job open. up to here all is ok. But when i call the generated function module. There comes the popup error message. The text on this popup is SAP <SystemID>:System message, Workprocess restarts. Session deleted" (or similar, I only get the german text "PBI: SAP-Systemnachricht: Workprozess druchgestartet (Modus abgebrochen)).
I dont know why.
Can anybody help?
Regards
Chris-> Executing Test Report FP_TEST_00 works correct. i see a pdf.
->Excecuting Test Report FP_CHECK_DESTINATION_SERVICE works correct
FP_JOB_CLOSE is not called in my report.
-> Executing Testreport:FP_TEST_IA_01 I get the error message:'
ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200.101).' -
Error while using Function module SPELL_AMOUNT with arabic language AR
Hi ,
When i am trying to convert the number to words, using function module SPELL_AMOUNT with arabic language(AR),following abend message is coming and FM is getting abended.
Entry AR 0 1 in table T015Z does not have a delimiter (
Can you please provide me how to overcome this error?
Thanks & Regards
Seshagiri.Hi Santosh,
Thanks for quick inputs.
And amount is not having any delimitors.
I have checked in table T015Z and it has entries with AR as SPRAS.
All entries are having ':' at the beginning of the arabic words,and there is no single entry with ';'.
All entries with EN as SPRAS are having delimiters ';' at the end of the words.
Numbers are correctly converted to words in english,but abending in arabic.
Any idea please.
Thanks & Regards
Seshagiri. -
Error while activating the function module
hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthikhii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta -
Error while Activating Activate Global Funds Management Functions (PSM-FM)
Hi,
I am getting the below error while activating Activate Global Funds Management Functions (PSM-FM) in Funds Management.
Aktivierung des Haushaltsmanagements ist nicht erlaubt
Message no. ZZ003
Kindly help me in fix this issue....
Thanks
KishoreHi,
Thanks for your reply. But can you clarify me why we need to delete the row Z_LEAVE in SE11 for FMISPS table. Because here ABAPER is objecting to do this as they feel there may be some impact if we delete this.
Kindly clarify me
Thanks
Kishore -
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
Error - While activation of Data in DSO
Hi Experts,
I'm facing following error message when tried to activate the data in DSO - The data went through fine in PSA and when triggered DTP to load data in DSO; the monitor showed green but when activated in DSO it's giving following error message. I transfered the global settings but facing the same following error message:
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause.
Procedure for System Administration
Any idea that why it's generating this error message while activating data in DSO. I checked those records in error stack and seems to be a date issue but I checked the factory calendar and check the validity and that's fine and is within the factory calendar data range.
Thanks in advance - you response will be really appreciated.hi,
as you said the global settings were done,
try the global settings once again then delete the PSA(if records were less) nd load from source and then load to target.
this may solve if all settings were fine.
if records were huge in PSA, try correcting the records in error stack after allowing the good records to the target.
Ramesh -
Error 6 in function module RSS_PROGRAM_GENERATE
Hi friends,
While testing the extraction of a hierarchy data source (0CMMT_ITEM_FMCI_PU_HIER) from RSA3, I encountered the above error. I looked into some notes and it was not of much help for me. Please let me know if someone have come across this error and know the solution.
Thanks and Regards
Subray HegdeHi,
look at oss note 705212:
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message <b>RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".</b>The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
/manfred -
Error while Activating Inventory record in WM
Hi All,
I am getting an error while activating Inventory record using LI02N ,The Inventory record has been created using LICC Cycle Inventory at Quant Level.The error detrails are as below:
Message Text:
Function code cannot be selected
Technical Data
Message type__________ A (Cancel)
Message class_________ BL (Application Log)
Message number________ 001
Message variable 1____ Function code cannot be selected
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 4 (Additional information)
Sort criterion________
Number________________
Thanks you all in Advance.
Regards,
NVKI am encountering a similar error whils tryng to create or display WM Physical Inventory documents.
Tx: LX16 - Error Message no. BL001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Tx: LI01N and LI03N u2013 Error Message no. L4001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Errors when trying to create or display PIs, but can run reports on u201CWH1u201D and configuration looks ok?
I cannot find anthing n SAP OSS for WM.
Any assistance would be appreciated.
Maybe you are looking for
-
I can connect to my WebDB host (RedHat 6.1, Oracle 8.1.5 and WebDB 2.2) only from my localhost. If I try to connect from a remote machine, my web browser tells me that may server is busy or down. Why? Thanks
-
Output not printing correctly for BI Publisher report.
Hi All, We have a BI Publisher report which is printing correctly on one printer but not on another printer. The top and right side of the output are getting truncated. Printer type for both the printer is same that is "--PASTA Universal Printer Type
-
Is there a CUCM API which can be used to see what calls are in progress?
Hello All, I am trying to build a basic monitoring application which will display a list of calls in progress along with endpoint information such as IP address etc Is there a CUCM API which can be used to see what calls are in progress? Thanks Matt
-
Who wants to be a Millionaire ??? CODE???
hi i'm tryin to make a basic game who wants to be a millionaire...i got the following..layout of the textfield textarea etc.. but i cant seem to use the vectors to store the questions from a txt file then transfer it over to the textarea box or radio
-
Problems for wlserver on win2kpro with sun jdk1.3.1
"I make evaluation for my company for BEA Weblogic Server 5.1 for Win2kPro with SP10 and with SUN jdk1.3.1 all is ok when I setup wlconfig -JAVA_HOME=C:\jdk1.3.1 but when I start wlserver I receive :