Error while activating in DSO, FIGL, only some months

Dear Colleagues!
I have an activation problem in an ODS, three differnt months loaded isolatedreturns with error when I activate. The error only occurs in June, July and august of 2004. 2005, 2006, 2003, 2002, 2001 and the rest of 2004 loads and activates fine!
Error messages:
Error when assigning SID: Action VAL_SID_CONVERT table 0ORG_DOC_YR
SYST: Period 001 is not valid in financial year variant K1Process 000108 returned with errors
Activation of M records from DataStore object ZFIGL_O2 terminated
Do you have any suggestions what this can be, or suggestions on what I can do to fins out more about this? And why it failes for these three months and not the rest of the years?
Regards Silje

Hi Ravi!
How do I check the fiscal year variant? By the way it is only for 2004 (june, july, august). The other years transfers and activates ok.
In my transformation 0FISCVARNT is filled out by the R/3 field FISCVAR. I can try to set it to contant value K1 and load again to see if it will activate.
Thank you!
Silje

Similar Messages

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

Error while activating 0FIAR_O03 DSO from Business content

Hi,
While I am activating 0FIAR_O03 DSO from Business content, getting an error "You do not have authorization for InfoSource 80FIAP_O03".
Thanks,
RAJ

Hi raj,
The error message clearly tells that you are not authorized...some of the authorization object is missing from ur profile...check the missing Auth object and get it add to ur ID.
do the following... try to activate the DSO once again ... you will get the message again
now enter transaction SU53 -- and click ok -- it will display the missing auth object from ur profile.
if it does not display any thing try to run the authorization trace using ST01 transaction ... to get the missing auth object.
Regards
KP

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Error while activating PM Business Content DSO 0PM_DS01

I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
Abhishek

Hi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar

Invalid character error while activating data in DSO.

Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoop

Hi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
 data: l_d_length like sy-index,
 l_d_char type c,
 l_d_index type sy-index,
 l oopx like sy-tabix.
 data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
 clear : result.
 call function 'CONVERSION_EXIT_ALPHA_INPUT'
 exporting
 input = tran_strucutre-XYZ -> object name in ur structure
 importing
 output = result.
 l_d_length = strlen( result ).
 do l_d_length times.
 l_d_index = sy-index - 1.
 l_d_char = result+l_d_index(1).
 call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
 exporting
 i_chavl = l_d_char
 i_iobjnm = xinfobj
 I_S_COB_PRO =
 I_T_COB_PRO_CMP =
 exceptions
 chavl_not_allowed = 1
 others = 2
 if sy-subrc <> 0.
 result+l_d_index(1) = ' '.
 endif.
 enddo.
Regards;
Jitendra

Hexadecimal Error while activating DSO

Hello Experts,
I'm getting following error while activating DSO. I tried ALL_CAPITAL, ALL_CAPITAL_HEXADECIMAL in RSKC. still i'm facing this problem anyone can suggest anything. Iam using BW3.x flow
Value "CC-5012 TRYPSIN/EDTA SOLUTION 100ML" (HEX 430043002D0035003000310032000A00540052005900500053) of characteristic 0CRM_ITDESC contains an error at position 8
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 8 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem.
Thanks
Ajay.D

Hi Ajay,
There are invalid characters at the specified position. Now you ahve 2 options:
1. Either edit the PSA manually and replace this invalid character
2. Use the Funvtion Module 'RSKC_CHAVL_CHECK' . Pass the data to it & get the invalid char replace it with space. This can be called in the filed level routine if the effected info object is identified .
Check out these threads:
Re: Problem with Characters that have a hexadecimal display between HEX00
Re: Invalid Characters issue
Regards
Raj

Error while activating DSO ....date is not possible....

Hi all,
While activating the DSO ,I am getting the following error: Value '20022009' of characteristic 0DATE is not possible
In FEB 20/02/2009 is possible ...but why system giveing this message...?
Any suggessions...on this..
Thanks....Bk
Edited by: BK BI on Feb 24, 2009 9:39 AM

Hi BK,
Looks like in your case 20 is being considered as month which is obviously invalid hence no SID could be generated for 0calday and hence the DSO fails when activation.
Now as Daya and anil mention you could change the date to format yyyymmdd and try reloading the file.
The general principle would be go to menu settings ---> status and check the logged on date ...the format being shown to you is the format you can try loading in.
Or go to System --- > User profile -
> Own data --->defaults tab .... check the data format there and enter the value in that format in your file..
Hope it helps,
Regards,
Sunmit.

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

Error during activation of DSO - Activation of M records from DataStore obj

Hi All,
Below is the error i am getting while activating the DSO, Even though similar post on this topic, solution not mentioned, any solution greatly appreciable.
When -
During Activation of DSO
State of DSO -
Request become "RED", It is available for reporting, some records in Active table, some in new table and some in new table.
Job Log -
Error when inserting the data record for data package
Process 000105 returned with errors
Error when inserting the data record for data package
Process 000106 returned with errors
Process 000107 returned with errors
Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0
Log for activation request ODSR_4GXKRYHMY97R9U62M6U52XXXY data package 000001...000001
Errors occured when carrying out activation
Analyze errors and activate again, if necessary
Activation of M records from DataStore object Z_DSPO terminated
Report RSODSACT1 ended with errors
Job cancelled after system exception ERROR_MESSAGE
Detail log -
Error when inserting the data record for data package 106
Message no. RSODSO_PROCESSING002
Diagnosis
Failed to store data records persistently. Possible causes are:
You tried to save a record that is already stored in the database.
This error only occurs with DataStore objects with option "Unique Data Records".
A unique index was created for the table of active data.
You can check this in the Data Warehousing Workbench by choosing "Display" for the DataStore object and opening the "Indexes" folder.
There is a technical problem on the database.
Thanks,

HI PT,
I am also getting the same error like i have loaded the data into DSO and tried to activate the init request but it has become red and checked in log found that there are some SID Generation errors so please give me the step by step solution.
SID Generation
Data Package 000056
Data Package 000064.
Thanks in advance,
Jay

Error while activating in 3.1H

Hi Guys,
I have an issue, I am copying a standard program for payment advice RFFOD__V into a Z-program ZRFOF__V and is working fine.
Now I have got another copy of RFFOD__V i.e. ZRFOD_B from a portugal system and now when I am try to copy the program ZRFOD_B from Portugal system to my system, I am getting some errors while activating stating that some data elements are not defined. The same data elements are used in the standard program RFFOD__V and is activating correctly, it is also working fine with ZRFOF__V, the problem only lies with ZRFOD_B.
Please note that I am using 3.1H system. Also please let me know how do you activate multiple programs together (i.e. a program and certain includes in 3.1H system).
Awaiting for your reply,
Thanks and Regards.
Mohammed.

Mohammed:
It's been a while since I used 3.1H, but when you go to activate your program, doesn't it give you a list of all inactive objects? If so, can't you highlight the program and all related includes and click on the green check mark to activate all programs at the same time?
.. Craig

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating in DSO, FIGL, only some months

Similar Messages

Maybe you are looking for