Error while activating Inbound Delivery Notification

Hi,
I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
What's missing?
I help will be rewarded.
Thanks,
Amit

Thanks Virendra,
You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
In EWM system - I had assigned the number range in following place:
Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit  along with the number transferred from ERP system. Hence it was giving error.
As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
It created Inbound Delivery successfully.
Thanks all of you for helping on it.
Cheers,
Amit

Similar Messages

  • Error while creating inbound delivery

    Hi All,
    I get an error while creating inbound delivery from ASN
    "Error during conversion of unit of measure: UoM is missing -> ST BOR131
    Please help solve this issue.
    Thanks in advance
    Regards,
    Thiru

    hi,
    please maintain the uom  for tour material.
    or
    reffer this link
    Alternate Unit of Measure Conversion Rule Error
    /thread/2000551 [original link is broken]
    Thanking you.

  • Error while doing inbound delivery

    HI,
    In our process we do GR by using mvt type 561 initial stock upload and then against the material documents , create inbound delivery( PGR).. While doing PGR we are facing the error as follows,
    STORAGE UNIT XXXXXXXXX IS WITHOUT APPENDANT HU
    Could any one tell what is the problem?
    Regards,
    abi

    Hi ,
    Pls refer path Delivery Issue in PGI
    Thanx....

  • Error while posting Inbound Delivery

    I am trying to post inbound delivery and getting error that there is no item avaialble on the Purchase order. Please help.
    Thanks in advance.

    Hi,
    Check Confirmation Control Key of resp. purchase order.
    Also check for the said inbound delivery, have you created shipment for this?
    If no, create with respect to Inbound delivery using transaction VT01N and then do GR agianst Inbound delivery.
    Please check and revert.
    Thanks
    Hrishi
    Edited by: Hrishi on May 30, 2011 10:53 AM

  • Error while activating Queue XBTR* in Manage Queues in TCODE sxmb_adm

    Hello Experts,
    SAP PI is sending the data to ECC through inbound proxy in PI SXMB_MONI it is showing Black colur flag as it is through but in R3 SXMB_MONI messages  are in green colur flag showing it is in scheduled state.Data is in quues in SMQ2.
    While i try to activate queues in SXMB_ADM it throwing as Error while activating Queue XBTR*
    XBTR Queue is in SMQ2.
    Regards
    Naresh

    Hello Naresh,
    Check if the queue XBTR* is already registered in your SAP R3 server.
    You have to do it first, if not already done.
    Regards,
    Subhajit

  • Error while activating r/3 souce system

    hello guys ,
      encounterd an error while activating the r/3 source system ...
    rsa1> source system> r/3 ( activate)
    errors :  " entry in inbound table is not found"
              "entry in outbound table is not found "
    as a result r/3 source system is not activated .
    so kindly reply to the above query..
    thanks
    kk

    Hi Krishna,
    The connection to R/3 is not correctly set.
    The partner profiles are not available in this case. You can check this in T-code WE20 in R/3 under type LS.
    Please recreate the source system in BW from RSA1.
    Reagrds,
    Amol

  • Error while activating IDN in EWM

    Hi
    Can anyone please help me with the following error? I am trying to activate an Inbound Delivery Notification in SCM5.0 and getting the error 'Application Error'. there is no message longtext or help available. I have configured the inbound delivery document and item type determination as follows. can anyone please help if the settings are correct? what i need to do to get rid of the error?
    Doc type determination
    Doc cat.----Doc.TypeItem cat.Item typeDoc cat.----Doc type
    blank--blankblankblalnkPDI--
    INB
    Item type determination
    Doc cat.-----Doc type---Item type grp--hier.typeItem type--Item cat.--
    Item type
    PDI--blankblankblankblankDLV--
    IDLV
    Thanks in advance!

    Hi Sharad,
    Thank you for the reply. There is no application log available in SLG1. I have configured the number range intervals for all documents in Warehouse, including the Inbound Deliveries. Can you think of anything else which might be causing the issue? does the Document and Item type determination seem okay? Please let me know.
    Thanks & Happy Holidays!

  • Error while invoking bean "delivery": Waiting for response has timed out.

    Hello,
    I am running a process that currently catches an exception from a partnerlink. When the exception is caught I send an email and the process exits. When I submit a request from the BPEL console, I have to wait until the JTA timeout before the page returns. However, the instance completes successfully and I receive the email before the timeout happens. This is what I see in the logs. When I look at the audit and activity flow, all of the activities were timestamped prior to the exception being thrown. Has anyone seen this behavior or know what is going on. Is there a problem sending email in a catch or catchAll block?
    <2009-04-19 22:33:41,859> <ERROR> <iCareTest.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
    com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
    Thanks in advance
    Jim

    There is no issue the reason why it times out is because you don't have a reply back to the client in your catch all.
    If you look at your process you will see that the defaul reply is in the main scope. When the catch all is invoked this reply is by passed, therefore no reply is sent.
    PLease a reply in your catch all back to the client and it will work.
    cheers
    James

  • While doing inbound delivery using VL31N

    While doing inbound delivery using the T-code VL31N , am getting the error message " Factory calendar  is not recognised "
    Guys Please help me out

    Hello ,
    while doing the PO in the item detail  confirmations tab i have selected the inbound delivery ECC and saved .After that i tried to create the inbound delivery for the PO at that time am getting the message 'factory calender is not recognised " .
    I have checked in the factory calender which is assigned to controlling area is"  K4 "
    Please help me out

  • Create Warehouse Request for Inbound Delivery Notification

    Dear Experts,
    I have created Inbound Delivery in  ECC and Inbound Delivery Notification has been created in SAP EWM.
    Kindly suggest me how and where can I create Warehouse Request for Inbound Delivery Notification.
    I donot see any transaction or link to create Warehouse Request for the Inbound Delivery.
    I am new to EWM.  Please suggest.
    Regards,
    Shetty

    Hi,
    After the Inbound delivery has been distributed to the EWM environment the Inbound delivery notification (IDN) is created. So far so good but after the IDN has been created you will have to activate it manually if it didn't automatically. In order to activate it please go to transaction /n/SCWM/IDN - Maintain Inbound Delivery Notification and execute it for all of the IDNs that are not activated. Then you activate it and it creates the ID.
    After the ID has been created, if the system (Post Processing Framework) didn't create the tasks relevant for receipt than you have to go into the ID and choose Inbound Delivery - Follow-On Functions - Warehouse Tasks and create and save the warehouse tasks relevant for receipt.
    All the best,
    Claudiu Maxim

  • Error while activating a routine  "no object list"

    hi
    I am getting a error while activating a routine Rv50c601
    "There is no object list for INCLUDEs"  Please suggest on the error and resoulution
    regards
    Nishant

    Try running program RV80HGEN.
    Regards,
    Naiimesh Patel

  • Error while activating transformation  ----   Message no. RSTRAN510

    Hi,
    while I am Extrating Data From Flat File I encountered this Error.
    I am working on <b>ECC 6.0 , BI 7.0.</b>
    I am trying this one in IDES, it is newly installed server.
    For Flat File Extraction I follwed the Steps
    1) I created Data source -
    let us assume I have created a Flat File with 3 fields
    SNO SNAME MARKS
    File is located in workstation
    Data source created successfull , I have checked in preview.
    2) I have created 2 key Figures, 1 characteristic
    3) I have created Infocube
    <b>here I have some doubt</b>
    while I am creating Infocube, the look and Feel is very different to 3.XX
    when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
    when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
    I created Like this
    select
    Info Area -
    > create Info cube   -
    given name of the cube and create (F5).
    the Info cube window displayed on the Right side
    Then I did like this
    select
    key Figures -
    > Info object Direct Input   
    Then I inserted my two key figures SNO,MARKS
    --- continue (F5)
    Dimension 1 -
    >  Info object Direct Input    
    I inserted the 1 char  SNAME
    --- continue (F5)
    Then I saved the Info cube
    Info cube saved successfull and activated successfull
    <b>Is it Right way For create InfoCube ?</b>
    4) I created Transfomation for the Data source
    Data source -
    > create Transfomation
    I have given
    Object Type  : InfoCube
    Name           :YSTU    - i selected which I already created.
    It automaticall taken these parameters
    Obejct Type     : DataSource
    Data source     : YSTU
    source system :PC_FILE
    create Transformation (Enter)
    I got the Error
    <b>Cannot generate proposal</b>
    <b>Message no. RSTRAN017</b>
    Then I try to activate, I got the Error.
    <b>Error while activating transformation</b>
    <b>Message no. RSTRAN510</b>
    Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
    I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
    I did mistake any where.
    Help me to Find the solution...
    sure you can get the points
    Thanks
    prasanna

    Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
    and i created Info Package too for the Data source , created successfully.
    I am struck on Final step  <b>creating DTP</b>
    when I am creating DTP
    Data Transfer Proc  : here I need to give the Dtp name ex: YDTP
    DTP Type               : Standard (Can be sheduled)
    Target of DTP
    <b>Object Type</b>       : Info cube
    <b>Name </b>               : YSTU  (This is my Cube Name)
    Source of DTP
    <b>Object Type</b>     : Data source  (It automatically Taken)
    <b>Data source</b>     : This is Disabled
    <b>Source system</b>:  This is Disabled
    continue (Enter)
    I got the message ?
    <b>Specify Name of source</b>
    and courser is in <b>Data Transfer Proc </b>
    Thanks
    prasanna

  • Error while activating Transformations

    Hi gurus,
    Iam facing a problem while activating Transformations.
    Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL  Data type is Amount, currency is fixed INR.
    But iam getting following errors while activating transformations.
    1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
    2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
    3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
    Regards
    Amar.

    Hi,
    Map it with required Unit filed from your Source .
    Mayank

  • Error while Activating / running Bex queries/reports

    Hello
    I have following ERRORs while activating / running BEx reports/queries.
    1. While Activating BEx reports, I keel getting following ERRORS
    Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
    Error when activating element BX7FOOKQB4588RROCBTC2YVZN
    BEx transport request 'BIDK901352' is not available or not suitable
    2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
    3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
    4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ? 
    Thanks, Sorry I have asked multiple questions, in jst one thread.
    BI

    Goto SE03 -->Search for Objects in Requests/Tasks  option , select the object type and execute it will give all the transports it has collected before ..
    Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
    Thanks,
    Ravi

  • Error while activating transformation

    Hi Experts,
    I need to activate a transformation between a cube and DSO.
    But I am getting an error message while activating the Transformation the messages are as followed.
    1. Error when writing routines
       Message Number. RSAA561
    2. Error while activating transformation
        Message Number. RSTRAN510
    3. Error activating transformation.
       Message number. RSO404
    I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
    Regards
    Shubh Karan

    Might be a problem with the time conversion routines. delete the transformationa nd try again.
    Good luck,
    vijay

Maybe you are looking for

  • Since dowloading latest version of Itunes, I can't sync podcasts to Iphone.

    Music works fine but not podcasts. In the past I would have to disconnect then reconnect phone at least twice for a podcast to sync, but now this doesn't work. I can't even find the tab that you check to download podcasts or music. There's a drop dow

  • Sum within a self-contained parent-child table

    I have two tables - a "key" table containing a multi-layer parent-child relationship, and an "amount" table containing the keys for the leaf nodes in the key table as well as numeric values (e.g. amounts). I want a query that returns each row in the

  • Distributing client/server forms app

    Hi I am distributing a client/server forms/reports app that calls stored database procedures. Does anyone have information on best-practice for version-control/distribution of upgrades etc? What is a good model to follow? At the moment I am using CVS

  • Business Server Page (BSP) error - CX_FQDN

    Hi All, I configured FDQN and Maintain SICF services in Solution Manager and still I am getting the following error:- Any help will be appreciated. Business Server Page (BSP) error What happened? Calling the BSP page was terminated due to an error. S

  • How do I add New York font?

    After the death of my G5 iMac running Tiger, I acquired an Intel iMac running Snow Leopard. A font often used in documents was New York. Now, when I open iWork documents recovered from the G5 I get the message saying some warnings occurred and do I w