Error While activating master data

Dear All,
I am getting an error while updating the master data.
Attributefrom characteristic A0SUBBRD not (actively) available
Attribute A4INNOCAT from characteristic A0BRD not (actively) available
Attribute A0BRD from characteristic A1MATR3 not (actively) available
Help me about to solve this issue
Thank you

Hi,
You are getting this error bcoz the mentioned info objects in the log are not active in the BW system.
make sure the characteristics are active and available in BW system before updating master data.
In which system are you facing this issue 9 DEV or QA or PROD)?
Have you collected all the objects while transporting? Try to retransport the objects it will work fine.
Regards
KP

Similar Messages

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1

Hi all,
Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
After creating an Integration model and while activating the same am getting the following error,
" System: SCMCLNT800 User: SMART03 06/17/2006 13:32:14
Function: /SAPAPO/CIF_LOC_INBOUND
Text:Error in address data for location DC2000/ECC800 "
Could anyone provide me how to fix this?.
Regards
Bharanidharan

Hi Veera,
Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
Regards
Bharanidharan

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Strange error while loading master data

Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.

Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps...

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Error while loading master data attribute

Hi Guru's
I am getting below mention error while loading master data attribute.
0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
Please sugggest how to resolve ?
Regards
Karan

Hi,
I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor.
Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
If need use Conversion exits in transfer rules.
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
or
ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
    INPUT         = 0MANU_MATNR
IMPORTING
   OUTPUT        =   Result .
Thanks
Reddy
Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Error while uploading master data attributes thru flat file

while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a new

This just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet. The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version.
The best way to correct this error is to reload RSA1. Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench.
Brian

Error while Activating ODS data

Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LS

hi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted.

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error While activating master data

Similar Messages

Maybe you are looking for