Error while activating new GL in ECC 5.0
Guru's
While i click in New GL activation i got Error & its wont allow me to get activate.
http://www.badongo.com/pic/479468
Please advise
regards,
kaush
The "display and maintained with restrictions" is an attribute of the table/view in se11, in order to change it to "display and maintained allowed without restrictions" you need to do a repair.
Similar Messages
-
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating Infocube
Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED Error/warning in dict. activator, detailed log --> Detail
GREEN Activate table /BIC/DDPCW14DFD1
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN A table called /BIC/DDPCW14DFD1 exists in the database
RED No active nametab exists for /BIC/DDPCW14DFD1
RED Termination due to inconsistencies
RED Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN Error number in DD_DECIDE (9)
YELLO Flag: 'Incorrect enhancement category' could not be updated
GREEN Table /BIC/DDPCW14DFD1 was not activated
GREEN Activate table /BIC/DDPCW14DFD2
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
MohnishCan i know in which environment are you working? BW 3.5 OR BI 7?
-
Error while deploying new RPD in obiee 11g
Hi ,
Getting the below error , while activating changes , after deploying a new RPD through EM :
Message SEVERE: Element Type: JEE_SERVER, Element Id: 01HW447397:bi_server1, Operation Result: UNEXPECTED_ERROR, Detail Message: Exception occured during setting configuration values.
Supplemental Detail Underlying cause of exception was:
oracle.bi.management.exceptions.ConfigMBeanRTException
Failed to generate edit filename for: C:\WINDOWS\ODBC.INI; java.io.IOException: Access is denied
Report on underlying changes made is:
INFO: Element Type: JEE_SERVER, Element Id: 01HW447397:bi_server1, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINE: Element Type: ORACLE_INSTANCE, Element Id: 01hw447397:instance5, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINE: Element Type: BI_INSTANCE_DEPLOYMENT, Element Id: 01hw447397:instance5:coreapplication, Operation Result: APPLYING_CONFIGURATION_CHANGES, Detail Message: null
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obis1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: RepositoryName set to value: PaintDesign_BI0008.rpd (was: DipTest_BI0005.rpd)
FINE: Element Type: BI_INSTANCE_DEPLOYMENT, Element Id: 01hw447397:instance5:coreapplication, Operation Result: APPLYING_ENDPOINT_CHANGES, Detail Message: null
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_sawbridge, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: sawservers set to value: 01hw447397:9710 (was: )
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obips1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: JavaHostProxyHost set to value: 01hw447397 (was: )
FINER: Element Type: SYSTEM_COMPONENT, Element Id: 01HW447397:coreapplication_obips1, Operation Result: MODIFIED_ATTRIBUTE, Detail Message: Attribute: JavaHostProxyPort set to value: 9810 (was: )
FYI , I succesfully checked in the RPD , tried restarting all BI services and re-login into EM . But the error still exists .Thanks for your replies !!
In any of the RPD deployments I'm getting the same error , not for some particular RPD .
FYI , yesterday (before this issue) I had a issue with starting presentation services , so as adviced in forum I replaced the files sawguidstate and sawguidstate.atrin the location:
<Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
with the same files from a backup or from another working OBIEE 11g (11.1.5)instance.
plese refer : Re: Unable to start presentation services , in OBIEE 11g
Is this causing the deployment issue ? -
SOAP Framework error while activating interactive form in SFP
hi everyone,
I am new to adobe forms, I got an error while activating interactive form
SOAP Framework error: SOAP Runtime Exception: CSOAPExceptionTransport: HTTP response contains unexpected content-type(100,101).
I am unable to trace this error, can anyone plz let me understand for what reason this error occurs.
Thanks in advance.
- AdityaIts an issue with ADS installation or configuration. Let your BASIS team know about this error with screen print. We had same issue and BASIS fixed it.
Raja -
Error while activating Queue XBTR* in Manage Queues in TCODE sxmb_adm
Hello Experts,
SAP PI is sending the data to ECC through inbound proxy in PI SXMB_MONI it is showing Black colur flag as it is through but in R3 SXMB_MONI messages are in green colur flag showing it is in scheduled state.Data is in quues in SMQ2.
While i try to activate queues in SXMB_ADM it throwing as Error while activating Queue XBTR*
XBTR Queue is in SMQ2.
Regards
NareshHello Naresh,
Check if the queue XBTR* is already registered in your SAP R3 server.
You have to do it first, if not already done.
Regards,
Subhajit -
SAP HANA: Error while activating Graphical Calculation Views
Hello,
I am receiving the below error while activating a Graphical Calculation View.
I am getting this error lately. Not sure what is causing this because the calculation views worked just fine before.
It is failing at the Repository Activation step with the Activation ID 2146.
It says - Repository: Revalidation failed for at least one object.
MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="sflight/GC_AGENCY_REVENUE" schema="_SYS_BIC"><dataSources><tableDataSource name="SBOOK" schema="SFLIGHT" table="SBOOK"><attributes><allAttribute /></attributes></tableDataSource><tableDataSource name="STRAVELAG" schema="SFLIGHT" table="STRAVELAG"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><join name="Join_1" type="inner"><viewAttributes><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="MANDT" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="AGENCYNUM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="FORCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="LOCCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="NAME" /></viewAttributes><inputs><input name="SBOOK"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="FORCURAM" target="FORCURAM"/><mapping source="LOCCURAM" target="LOCCURAM"/></input><input name="STRAVELAG"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="NAME" target="NAME"/></input></inputs><joinAttributes><joinAttribute excludeFlag="false" name="MANDT" /><joinAttribute excludeFlag="false" name="AGENCYNUM" /></joinAttributes></join><aggregation name="finalAggregation" defaultViewFlag="true"><inputs><input name="Join_1"><mapping source="NAME" target="NAME"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="MANDT" target="MANDT"/><mapping source="LOCCURAM" target="LOCCURAM"/><mapping source="FORCURAM" target="FORCURAM"/></input></inputs><viewAttributes><viewAttribute name="NAME"/><viewAttribute name="AGENCYNUM"/><viewAttribute name="MANDT"/></viewAttributes><keyfigures><keyfigure name="LOCCURAM" aggregationType="sum"/><keyfigure name="FORCURAM" aggregationType="sum"/><keyfigure name="row.count" datatype="int" isVisible="false" aggregationType="count"/></keyfigures><calculationNodeHints countStarAttribute="row.count"/></aggregation></calculationViews></calculationScenario></cubeSchema>nVersion: 33n
I am using the SFLIGHT schema which is provided by SAP.
Any pointer is appreciated.Hi Murali
I met the exactly same issue when I try to activate a graphical calculation views.
I created a new user in HANA db, then create a simple graphical calculation view(just from one table from this user). It doesn't work. All attribute views work fine. There's no related column view under _sys_bic.
HANA database version is 1.00.31 runs on HP DL580 512GB. And here's the error message -
"MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="co-pc-river/CALC_TEST1" schema="_SYS_BIC"><dataSources><tableDataSource name="JEST" schema="GLR" table="JEST"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><projection name="finalProjection" defaultViewFlag="true"><inputs><input name="JEST"><mapping source="MANDT" target="MANDT"/><mapping source="OBJNR" target="OBJNR"/><mapping source="STAT" target="STAT"/><mapping source="INACT" target="INACT"/></input></inputs><viewAttributes><viewAttribute name="MANDT"/><viewAttribute name="OBJNR"/><viewAttribute name="STAT"/><viewAttribute name="INACT"/></viewAttributes></projection></calculationViews></calculationScenario></cubeSchema>nVersion: 64n"
Best Regards
Mao Mingqi -
ERROR WHILE ACTIVATING THE DATASOURCE
Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDRHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Error while activating ODS Object (urgent)
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki. -
Getting Runtime Error while Activating Characteristics in BW sandbox system
Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AMHi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards. -
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while creating new user in Oracle 11i EBS
I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
- This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
- This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
- This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
1344802
1363919
1472974
1351004
1377615
You will need to apply the following patches for 11.5.2:
1377615 -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay
Maybe you are looking for
-
Error while selecting transaction type 650 during ABAA.
Hi Experts, We are facing an issue with transaction type 650 while executing unplanned depreciation posting for a certain company code not for all. The error message no. AA380. But it is working fine for other company codes. It has been observed that
-
Fuzzy iTunes cover art scroll bar
Just recently got my Black Macbook Core 2 Duo with 2 Gig Ram and a 160 Gig HD. After I installed my music library into iTunes, the left-right scroll bar in cover art display has become quite fuzzy. A quit and restart solves it temporarily, but it als
-
Hi, How can we output easily a message to the console when running a function?
-
Exporting Timeline from Speedgrade
I am working with Premiere Pro and Speedgrade CC. I find using the direct-link is fine but a bit limiting in terms of the full potential of Speedgrade. The direct-link from Premiere Pro also seems to slow up my system and grading becomes very clunky
-
Hey is there any way to have small desktop icons without downloaded or moved icons getting caught underneath the dock? setting the grid's margins or something like that, 3rd party app possibly?? Amazing how Apple could overlook this annoying behavior