Error while Activating ODS data
Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LS
hi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted.
Similar Messages
-
Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki. -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Error while activating ODS Object (urgent)
Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki. -
Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hariHi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks -
Error While Activating ODS in BW
Hai Experts
While Activating the ODS the following errors are occurs
The creation of the export DataSource failed
RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
I am using IDES BW 3.1C.
Kindly suggest me a solution.
Balaji VK
09342501065
Error when activating ODS Object SALEODShi,
also take a look this
Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met -
Error While Activating the Data Source in RSA5 T-Code
Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar. -
Error while activating Transactional data source
I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth. -
Getting Error while activating ODS
Hi Friends,
I have created ODS, while trying to activate, i am getting the following error.
<b>Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325</b>
do u have any idea, to solve this problem
points for sure.....
Thanks in Advance
VijayaHi Vijaya,
How did you maintain the assignment ? check again, the ID is filled ?
click 'suggest source system id' and save ?
similar problems were solved with that, try to check if you miss something
Transfer Rule mapping for sourcesyestem
Error while loading master data from R/3
Red error "No source system ID exists for source system (logical system) A"
Hope this helps.
Cheers
Raj -
COMPUTE_INT_PLUS_OVERFLOW error while activating ODS
Hi SDN,
There is 'COMPUTE_INT_PLUS_OVERFLOWu2019 short dump while activating ODS obj in BW 3.1 Version. Will you plz hlp me on this.
Thank youHello,
Download the correction from the SAP Note 1031750 P34:Dump COMPUTE_INT_PLUS_OVERFLOW in CHECK_LAST_STATUPD
Also see SAP Note 658481 BW 2.0B/3.0B(34/16) ALPHA converter for ODS objects - INT
Thanks
Chandran -
Error while activating ODS is not caught in the back ground job..
Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumarHi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly -
Error while activating ODS Object
Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
RajRaj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti. -
Error while activating the data source.
Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.MHi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps.. -
Error While activating master data
Dear All,
I am getting an error while updating the master data.
Attributefrom characteristic A0SUBBRD not (actively) available
Attribute A4INNOCAT from characteristic A0BRD not (actively) available
Attribute A0BRD from characteristic A1MATR3 not (actively) available
Help me about to solve this issue
Thank youHi,
You are getting this error bcoz the mentioned info objects in the log are not active in the BW system.
make sure the characteristics are active and available in BW system before updating master data.
In which system are you facing this issue 9 DEV or QA or PROD)?
Have you collected all the objects while transporting? Try to retransport the objects it will work fine.
Regards
KP -
Error while Activating ODS 0FIGL_O02
Dear All.
i load the data from R/3 into my ODS 0FIGL_O02 it loads succesfull in PSA and then into ODS with green light, but when i try to activate the request it gives me following error.
Value 'As Per Nabeel' (hex. '41007300200050006500720020004E0061006200650065006C') of characteristic 0DOC_HD_TXT contains invalid cha.
Now where is the invalid character in the value, on top of that i am not able to find that record by search in Document Header Field in New Data Table and also in PSA i am trying like this.
in Document Header Text i provide the value As Per Nabeel, and also Nabeel but not able to found the record so i can see what is the problem.
what i can see the error log is the Data Package number is there any way to found the detail for this record.
How to found this record in PSA or in New Data table as per the value specified.
in RSKC i have given the following value ALL_CAPITAL_PLUS_HEX.
Please guide me to resolve the following issue.
thanks and best regards,Hello,
It is better to use rutine to aviod invalid characters: just replace YOUR_FIELD
DATA: l_user_allowed_char TYPE rsallowedchar,
l_all_allowed_char(140) TYPE c,
l_result_str_len TYPE i,
l_str_increment TYPE i.
CONSTANTS c_sap_allowed_char(58) TYPE c VALUE
' !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
IF l_all_allowed_char IS INITIAL.
SELECT SINGLE * FROM rsallowedchar
INTO l_user_allowed_char
WHERE allowkey = 'S'.
CONCATENATE c_sap_allowed_char
l_user_allowed_char-allowchar
INTO l_all_allowed_char.
ENDIF.
RESULT = TRAN_STRUCTURE-YOUR_FIELD.
TRANSLATE RESULT TO UPPER CASE.
l_result_str_len = STRLEN( RESULT ).
l_str_increment = 0.
WHILE l_str_increment <> l_result_str_len.
IF NOT RESULT+l_str_increment(1) CO l_all_allowed_char.
RESULT+l_str_increment(1) = ' '.
ENDIF.
ADD 1 TO l_str_increment.
ENDWHILE.
BR
Ondrej
Maybe you are looking for
-
Macbook Pro runs slow after upgrade
I have just upgraded to Mountain Lion 10.8.3 (from 10.6.8) on my 2011 i7 Macbook Pro. My computer now runs slower than ever. Boot up takes forever. Shut down takes for ever. I get constant beach ball. I am shocked at how horrible this OS is and thoug
-
Error KI235 - Account requires an assignment to a CO object
Hi gurus, I just wanted to ask re: thjs issue of ours wherein we can't release a billing document to accounting (VFX3) and system issues error message - KI235 (account assignment missing). In OKB9, the profit center assignments have already been set.
-
Good Morning Everyone, I seem to have constant IP Profile problems where I have to keep contacting the Broadband Helpdesk to get the IP Reset every few weeks. It seems to do it if the weather is bad (like over the past couple of days) or if i watch
-
Dear friends, Please mail to me how to solve the issue of material blocks? That is when different users are creating orders, deliveries and invoices for a single material at a time, the material is getiing blocked. Then I am releasing the material. P
-
Help in user exit...urgent
hi friends, i have to find user exit for the following purpose in FI module.... While making the Down payment to vendor via T.code F-48, we have to validate the field BKPF- XBLNR. The entry in this field should be either PO number or Service entry s