Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Similar Messages

  • Error while activating ODS Object (urgent)

    Hi Gurus,
    I am getting an error while activating ods object.
    Error/warning in dict. activator, detailed log  --> Detail.
    Row type /BIC/AGLCATODS00 is not active or does not exist.
    Table type /BIC/WAGLCATODS00 could not be activated.
    Table /BIC/AGLCATODS50 could not be activated.
    Table is not yet classified.
    Return code..............: 8.     
    DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
    Error when activating ODS Object GLCATODS.
    If any one have come across this issue please help me out in resolving this issue.
    I will reward points.
    Urs,
    Raki.

    Hi venkat,
    There are only 3 info objects which  i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
    Is this issue is related to any authorization concerned?
    Urs,
    Raki.

  • Error while activating ODS Object

    Hi,
    I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
    -Value '20060 ' of characteristic 0CALQUARTER is     not  plausible
    -Error when assigning SID (details in long text)
    -Activation of data records from ODS object ZODS_02 terminated
    -Error getting SID for ODS object ZODS_02
    I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
    Regards,
    Raj

    Raj,
       you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
    you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
    Possibilites:
    1. updtae rules
    2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
    3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Error while Activating ODS data

    Hi Experts,
    I am getting following error while Activating ODS Request.
    Job started                                                         
    Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
    Activation is running: Data target ZINV_MAT, from 7,883 to 7,883    
    Data to be activated successfully checked against archiving objects 
    SQL: 10/17/2005 21:04:17 lsingh                                      
    ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE                             
    STATISTICS                                                          
    SQL-END: 10/17/2005 21:04:17 00:00:00                               
    SQL: 10/17/2005 21:04:17 GOELA                                      
    BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>                    
    'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',                          
    ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL                      
    INDEXED COLUMNS SIZE 75', DEGREE => 1 ,                             
    GRANULARITY => 'ALL', CASCADE => TRUE ); END;                       
    SQL-END: 10/17/2005 21:04:17 00:00:00                               
    ABAP/4 processor: DBIF_RSQL_INVALID_RSQL                            
    Job cancelled                                                       
    It's giving DBIF_RSQL_INVALID_RSQL error.
    I am loading full upload to the ODS first time.
    Any answer will be greatly appreciated.
    Regards,
    LS

    hi LS,
    yes contact basis is the right way
    try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted.

  • Error while activating ods

    Hi all,
    i have the following errors turning up while activating ods.
    1. creation of export data source failed
    2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
    3. error when activating ods object
    Can anyone let me know how to rectify it.
    regds
    hari

    Hi,
    The problem is with ur Source Sys connection..
    Above problems will be solved by restoring Source System Connection...  Ask your Basis team to restore SS.
    Thanks

  • Error While Activating ODS in BW

    Hai Experts
    While Activating the ODS the following errors are occurs
    The creation of the export DataSource failed
    RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
    Error when creating the export DataSource and dependent Objects
    I am using IDES BW 3.1C.
    Kindly suggest me a solution.
    Balaji VK
    09342501065
    Error when activating ODS Object SALEODS

    hi,
    also take a look this
    Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met

  • COMPUTE_INT_PLUS_OVERFLOW error while activating ODS

    Hi SDN,
    There is 'COMPUTE_INT_PLUS_OVERFLOWu2019 short dump while activating ODS obj in BW 3.1 Version. Will you plz hlp me on this.
    Thank you

    Hello,
    Download the correction from the SAP Note 1031750 P34:Dump COMPUTE_INT_PLUS_OVERFLOW in CHECK_LAST_STATUPD
    Also see SAP Note 658481 BW 2.0B/3.0B(34/16) ALPHA converter for ODS objects - INT
    Thanks
    Chandran

  • Error while activating the object from change list in IR

    Hi Friends,
    I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
    Regards,
    Suresh.

    Hi Suresh,
    have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
    Best Regards
    Sven

  • Error while activating ODS is not caught in the back ground job..

    Hi All,
    We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
    My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
    Thanks for reading.
    Umamaheswar kumar

    Hi Uma,
    A few hints for running and schedule and monitoring process chains:
    - always schedule the process chain in tcode RSPC
    - check the log in RSPC for error messages, or
    - check BW monitor for the ODS concerned (tcode RSMO, tab Details)
    if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
    either in RSPC - log or RSMO.
    hope it helps.
    Regards,
    Lilly

  • Getting Error while activating ODS

    Hi Friends,
    I have created ODS, while trying to activate, i am getting the following error.
    <b>Transfer structure prefix for source system T90CLNT090 is not defined
    Message no. RSAR325</b>
    do u have any idea, to solve this problem
    points for sure.....
    Thanks in Advance
    Vijaya

    Hi Vijaya,
    How did you maintain the assignment ? check again, the ID is filled ?
    click 'suggest source system id' and save ?
    similar problems were solved with that, try to check if you miss something
    Transfer Rule mapping for sourcesyestem
    Error while loading master data from R/3
    Red error "No source system ID exists for source system (logical system) A"
    Hope this helps.
    Cheers
    Raj

  • Error while activating DataStore Object

    Hi Experts,
    I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
    "DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
    My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
    Below is the dump:
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program
      "CL_RSTRAN_TRFN================CP " in include
      "CL_RSTRAN_TRFN================CU " in
    line 159:
    "Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
    Message was edited by: SAP BI

    Are you using transformations/DTP to load the DSO??
    I am not sure if this helps
    Note 961556 - DataStore (activation): Columns are initialized without rule
    Note 974833 - DataStore (activation): Columns initialized without rule
    Hope it Helps
    Chetan
    @CP..

  • Error while activating info objects.

    Hi,
    After activating the data in ECC rsa5 and replicating it in BW rsa1, when i am trying to activate the infoobjects in object types i get the following error.
    *DataSource 0RF_ARTHIER_ACT does not exist in source system DVMCLNT110 of version A     *
    kindly help me.
    thanks.
    - rohit mulay

    Hi Rohit,
    you can activate the datasource by using 'RSDS_DATASOURCE_ACTIVATE_ALL'program
    Please follow bellow steps:
    1.Goto SE38>give the Program>click on Execute.
    2. Give the technical name of Datasource and Execute.
    Note: there is one check box, first execute with that checkbox checked and see, if that didnt work, uncheck the checkbox and execute, hope this should solve your problem.
    3. Replicate the Datasouce in BI side.
    4. Activate the relavent Objects indevedulally.
    Regareds,
    Suman

  • Error while Activating ODS 0FIGL_O02

    Dear All.
    i load the data from R/3 into my ODS 0FIGL_O02 it loads succesfull in PSA and then into ODS with green light, but when i try to activate the request it gives me following error.
    Value 'As Per Nabeel' (hex. '41007300200050006500720020004E0061006200650065006C') of characteristic 0DOC_HD_TXT contains invalid cha.
    Now where is the invalid character in the value, on top of that i am not able to find that record by search in Document Header Field in New Data Table and also in PSA i am trying like this.
    in Document Header Text i provide the value As Per Nabeel, and also Nabeel but not able to found the record so i can see what is the problem.
    what i can see the error log is the Data Package number is there any way to found the detail for this record.
    How to found this record in PSA or in New Data table as per the value specified.
    in RSKC i have given the following value ALL_CAPITAL_PLUS_HEX.
    Please guide me to resolve the following issue.
    thanks and best regards,

    Hello,
    It is better to use rutine to aviod invalid characters: just replace YOUR_FIELD
      DATA: l_user_allowed_char TYPE rsallowedchar,
      l_all_allowed_char(140) TYPE c,
      l_result_str_len TYPE i,
      l_str_increment TYPE i.
      CONSTANTS c_sap_allowed_char(58) TYPE c VALUE
      ' !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
      IF l_all_allowed_char IS INITIAL.
        SELECT SINGLE * FROM rsallowedchar
        INTO l_user_allowed_char
        WHERE allowkey = 'S'.
        CONCATENATE c_sap_allowed_char
        l_user_allowed_char-allowchar
        INTO l_all_allowed_char.
      ENDIF.
      RESULT = TRAN_STRUCTURE-YOUR_FIELD.
      TRANSLATE RESULT TO UPPER CASE.
      l_result_str_len = STRLEN( RESULT ).
      l_str_increment = 0.
      WHILE l_str_increment <> l_result_str_len.
        IF NOT RESULT+l_str_increment(1) CO l_all_allowed_char.
          RESULT+l_str_increment(1) = ' '.
        ENDIF.
        ADD 1 TO l_str_increment.
      ENDWHILE.
    BR
    Ondrej

  • Error while activating Data object in DOE workbench

    Hi all,
    I created a Data Object and when I try to activate  that DO it is showing an error as below.
    Mobile Java client attributes not maintained.
    Please give some clue to resolve this.
    Thanks and Regards,
    Rajesh.A

    Hi Rajesh,
    I believe you had created an SWCV that is enabled for Backward Compatibility 'Uses NW04/NW04s MI application' and created a Data Object in this SWCV. Ideally, when the SWCV is enabled for Backward Compatibility, the Data Objects should be created by importing the text file as Data Objects from a MI 7.0 server. Since you have not done that way, you are getting this error.
    I would suggest that you create a new SWCV and do not check the option 'Uses NW04/NW04s MI application'. Now create the Data Object again and try to activate it and you should be able to activate it.
    Best regards,
    Vinodh

  • Error while activating any object

    Hi Everyone,
    I m have strange problem with bi sever.
    When ever i try to activate any object in system goes in debugging mode.
    Can any one tell y dis happening.
    did i activated some setting ???
    /sachinkumar.

    Hi,
    I think Some one Swithced on Break Point.
    In Debugging mode take that program name and go to SE38 Click on Brek Point icon it will remove break point.
    Please let me know whether it works or not.
    Regards,
    Shivu.

Maybe you are looking for