Error while activating ODS Object (urgent)

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Hi venkat,
There are only 3 info objects which i have created it and activated, only those i am pulling in the new ods but its throwing the same error what ever i do changes.
Is this issue is related to any authorization concerned?
Urs,
Raki.

Similar Messages

Error while activating ODS Object (BIC/WAGLCATODS00 &/BIC/AGLCATODS00 )

Hi Gurus,
I am getting an error while activating ods object.
Error/warning in dict. activator, detailed log --> Detail.
Row type /BIC/AGLCATODS00 is not active or does not exist.
Table type /BIC/WAGLCATODS00 could not be activated.
Table /BIC/AGLCATODS50 could not be activated.
Table is not yet classified.
Return code..............: 8.
DDIC Object TABL /BIC/AGLCATODS00 has not been activated.
Error when activating ODS Object GLCATODS.
If any one have come across this issue please help me out in resolving this issue.
I will reward points.
Urs,
Raki.

Frank,
There is lot of free space in data base table i already checked it before.... in sm21 it showing database errors.
Strange i m unable to find out the solution.
Urs,
Raki.

Error while activating ODS Object

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Error while activating ods

Hi all,
i have the following errors turning up while activating ods.
1. creation of export data source failed
2. rfc connection to source system b3tclnt800 is damaged - no meta data upload
3. error when activating ods object
Can anyone let me know how to rectify it.
regds
hari

Hi,
The problem is with ur Source Sys connection..
Above problems will be solved by restoring Source System Connection... Ask your Basis team to restore SS.
Thanks

Error While Activating ODS in BW

Hai Experts
While Activating the ODS the following errors are occurs
The creation of the export DataSource failed
RFC connection to source system B3TCLNT800 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
I am using IDES BW 3.1C.
Kindly suggest me a solution.
Balaji VK
09342501065
Error when activating ODS Object SALEODS

hi,
also take a look this
Re: "RFC connection to source system [our R3 TEST system] is damaged ==> no Met

Error while Activating ODS data

Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LS

hi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted.

Error in activating ODS--Most Urgent

Hi Experts,
I am facing error when activating ODS. THe load was succesfull and activation failed. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message
"Error when assigning SID: Action VAL_SID_CONVERT table 0WS_VALUE"
"Error getting SID for ODS object"
"Activation of data records from ODS object 0WS_O01 terminated "
"Value ' 4 5 6 7 8 9 ' (hex. '20002000090034002000200009002000200020000900350020') o "
And under others also it is showing same message.
Can any one please suggest how to solve this issue. Its very urgent.
Waiting for appropriate solution...

Hi,
The string you provided contains multiple TAB symbol (' 0900' ). They are not acceptable by ODS. You need to remove or replace them.
Here
Re: Removing the carriage return / Tab during data extraction
you can see some code examples on how to do it.
Though, as I can see your system is on UNICOD - you'll need to make some adjustment to the code you'll choose.
Best regards,
Eugene

COMPUTE_INT_PLUS_OVERFLOW error while activating ODS

Hi SDN,
There is 'COMPUTE_INT_PLUS_OVERFLOWu2019 short dump while activating ODS obj in BW 3.1 Version. Will you plz hlp me on this.
Thank you

Hello,
Download the correction from the SAP Note 1031750 P34:Dump COMPUTE_INT_PLUS_OVERFLOW in CHECK_LAST_STATUPD
Also see SAP Note 658481 BW 2.0B/3.0B(34/16) ALPHA converter for ODS objects - INT
Thanks
Chandran

Error while activating the object from change list in IR

Hi Friends,
I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
Regards,
Suresh.

Hi Suresh,
have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
Best Regards
Sven

Error while activating in IR-----Urgent

i am getting following error while trying to activate my object in IR
NAME SPACE not defines in SWCV.
i have activated name space also.
still iam getting error.
Plz help

Hello Dinesh,
In the change list activate namespace only, then activate rest of the objects.
Activate first namespace individually,
later activate rest of the objects individually by order ,or all
With Regards,
Raju.
Please give points if useful...

Error while activating ODS is not caught in the back ground job..

Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumar

Hi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly

Getting Error while activating ODS

Hi Friends,
I have created ODS, while trying to activate, i am getting the following error.
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
do u have any idea, to solve this problem
points for sure.....
Thanks in Advance
Vijaya

Hi Vijaya,
How did you maintain the assignment ? check again, the ID is filled ?
click 'suggest source system id' and save ?
similar problems were solved with that, try to check if you miss something
Transfer Rule mapping for sourcesyestem
Error while loading master data from R/3
Red error "No source system ID exists for source system (logical system) A"
Hope this helps.
Cheers
Raj

PlzzReply.. rlly Urgent:Transfer Struct. Prefix Error while Activating ODS

Hello BW Gurus,
When I am trying to activate my newly created ODS , the following error is one among the 3-4 errors : "Transfer Structure prefix is not defined for T90CLNT090 system". I am using ECC 5.0:BW 3.5
I followed the steps provided in the following link, but not successfull.
Transfer structure prefix error
I dont find any entries in SLOGSYS(T90CLNT90) & in RLOGSYS(T90CLNT90)..
I need to resolve this error as soon as possible as we dont have the Basis guy at the moment. (as it is not letting me activate the newly created ODS to load the data in it)
Not an issue awarding points.
Thanks,
Vamsi.

Hello Mr.Cora,
Thanks again for ur time in relpying me. And Extremely sorry for my late response. I am not in the City these four days.
I guess whatever u have observed is merely correct.
I am in BW learner and I am using an IDES version which is installed in my PC called ECC 5.0 (which should resemble the features related to NetWeaver 2004 and I heard ECC 6.0 should be resembling NetWeaver 2004s)
So ECC 5.0 is a combined package which has SAP R/3BW 3.5mySAP Components etc..
I Login using SAPUSER as my user ID and 800 as my client with a certain password and enter into SAP environment and then I use RSA1 to enterinto BW Administartor Work Bench (we could fix a transaction to directly switch to that screen though soon after we login)
I did not do any system copy and I dont have a specific separate landscape system and as u said mine should be Development system as My Application Server's name is: SAP_DEV_00.
I have 3 logical Source Systems defined:
1. It is the main ID i.e., T90CLNT090 with 800 Client( which is defined at the time of Installation of ECC 5.0)
2nd and 3rd are the Flat file source system which are defined by myself for my flat file loading purposes.
Note: I have Database, Application and Presentation layers in only one CPU(i.e., in my PC alone)
And Mr. Cora plz let me know the Following:
1.The conventional Landscapes and their logical names (for Non-Netweaver versions like SAP R/3 till 4.6X versions and for Netweaver 2004 &2004s versions). and
2. Does the Different landscape environments eg; DEV, QA,PROD have same Logical Sorce systems defined?? or Different ones??
Hope now u have a good idea about what I have it with my PC.
As I am not able to activate my ODS .. I am not able to load my flat data or any data.. so that I could move on with my preparation!!
Any kind of help in this reagard is more than a help for me..
thanks,
Vamsi.

Error while activating DataStore Object

Hi Experts,
I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
"DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
Below is the dump:
Error in the ABAP Application Program
The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN================CP " in include
"CL_RSTRAN_TRFN================CU " in
line 159:
"Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
Message was edited by: SAP BI

Are you using transformations/DTP to load the DSO??
I am not sure if this helps
Note 961556 - DataStore (activation): Columns are initialized without rule
Note 974833 - DataStore (activation): Columns initialized without rule
Hope it Helps
Chetan
@CP..

Error while activating info objects.

Hi,
After activating the data in ECC rsa5 and replicating it in BW rsa1, when i am trying to activate the infoobjects in object types i get the following error.
*DataSource 0RF_ARTHIER_ACT does not exist in source system DVMCLNT110 of version A *
kindly help me.
thanks.
- rohit mulay

Hi Rohit,
you can activate the datasource by using 'RSDS_DATASOURCE_ACTIVATE_ALL'program
Please follow bellow steps:
1.Goto SE38>give the Program>click on Execute.
2. Give the technical name of Datasource and Execute.
Note: there is one check box, first execute with that checkbox checked and see, if that didnt work, uncheck the checkbox and execute, hope this should solve your problem.
3. Replicate the Datasouce in BI side.
4. Activate the relavent Objects indevedulally.
Regareds,
Suman

Error while activating ODS Object (urgent)

Similar Messages

Maybe you are looking for