Error while activating PM Business Content DSO 0PM_DS01

I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
Abhishek

Hi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar

Similar Messages

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activating standard business contents e.g : 0SD_C11, 0SD_C12

Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...

Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul...

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Error while activating the Business Content

Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.S

And also check whether there are any dumps in ST22.
Khaja

Error during activation of business content

Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!

Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance!

Error in transfer structure while activating the business content

Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.

Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Error in Activating the Business Content Infocube 0CRM_C08

Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUN

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activation of Bi content of Bi cockpit

Hi all,
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I have applied the sap note 1110642 , 1110641 . also ran the program RSSM_SHIPDVERS_CLEANUP but did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
Akash

Akash you may be wrong.
When I tried to install Technical content in my BW system, I faced the same problem what you have mentioned.
What the system does in such cases is gathers certain system specific informations from teh connected sources. In my case, it tried to install teh datasources to the APO system & the CRM system.
However I unchecked the option while installing from Business Content for these two systems and rest went on fine.
Myself source system was perfectly ok and the DS got installed correctly on BW.
So please check if the error is for other Source Systems.
Regards
Anujit Ghosh
Edited by: Anujit Ghosh on Jul 23, 2008 2:03 PM
While installing from Business Content, do one by one(first InfoProviders, then DataSources etc) using the following help
http://help.sap.com/saphelp_nw70/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
You will find a list of all the related objects here.

Errors while transporting the Business Content

hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
   Start of the after-import method for object type R3TR IOBJ (Activation Mode)
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   Interval 01 of number range RS_OBJNUMG is missing   > Long text
   InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
   Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manicks

hi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07

Error InfoObject inactive while activation of Business content for cube

I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye

Error while installing the Business Content 2lis_03_bf Transformation

Hi,
I have installed total 0ic_c03 cube and successful.
Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
Please advise me : urgent
Thanks & Regards,
Srinu.Rapolu

Hi,
it seems like issue with ABAP routine.
Can you try to get detail error by doing syntax check.
Also if you are in BW 7.31 - I notices while releasing it shows error. I will suggest ignore it and just released. it worked for me.
You always have option to recapture the transport and resend the same objects, if earlier failed.
Thank-You.
Regards,
VB

Error While Installing the Business Content Query

Dear Friends,
We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
Thanks ..
Anurag

Are you assigning a new request or creating a new one? Try to assign to a new request if you are not doing so.
Thanks
Wind

Error While Activating the CO-PA DSO

Hi Friends
As i am new to CO-PA . I am facing problems while activating DSO.
Error : Short dump has not been completely stored (too big)
What happened?
Error in the ABAP Application Program
The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Error analysis :
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
Please Suggest me
Thanks
Gowtham

Hi Fathima
Here is the screen description
Short text
    Type conflict with ASSIGN in program "GPDI1O4GBC7CYZNYW1LK35LKP6J".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
     because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to assign a field to a typed field symbol,
    but the field does not have the required type.
Trigger Location of Runtime Error
    Program                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
    Include                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
    Row                                     886
    Module type                             (METHOD)
    Module Name                             EXECUTE
Thanks
Gowtham

Error - While activation of Data in DSO

Hi Experts,
I'm facing following error message when tried to activate the data in DSO - The data went through fine in PSA and when triggered DTP to load data in DSO; the monitor showed green but when activated in DSO it's giving following error message. I transfered the global settings but facing the same following error message:
Diagnosis
     An exception wrong_date was raised while executing function module
     RST_TOBJ_TO_DERIVED_TOBJ .
System Response
     Processing the corresponding record has been terminated.
Procedure
     To analyze the cause, set a break point in the program of the
     transformation at the call point of function module
     RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
     investigate the cause.
Procedure for System Administration
Any idea that why it's generating this error message while activating data in DSO. I checked those records in error stack and seems to be a date issue but I checked the factory calendar and check the validity and that's fine and is within the factory calendar data range.
Thanks in advance - you response will be really appreciated.

hi,
as you said the global settings were done,
try the global settings once again then delete the PSA(if records were less) nd load from source and then load to target.
this may solve if all settings were fine.
if records were huge in PSA, try correcting the records in error stack after allowing the good records to the target.
Ramesh

Error while activating PM Business Content DSO 0PM_DS01

Similar Messages

Maybe you are looking for