Error while activating POS - Message /SAPAPO/TSM154
Hi,
We have installed SCM 2007 in our landscape recently. We are facing problem in Activating the standard POS objects like 9ADPBAS, 9ASNPBAS etc., we get error as " Planning Object Structure is invalid".
We tried to create a new MPOS in the system, but can not activate the same. We get error message /SAPAPO/TSM154. In Service Marketplace we have a note 1152453 for this kind of error, but while implementing we again get error stating "Cannot be implemented". Diagonsis states " SAP Note does not contain valid correction instructions".
Have anyone faced similar problems? Please help us out.
Thanks,
Rajesh Manoharan
Hi,
Thanks for the reply.
I tried to use the report "/SAPAPO/TS_PSTRU_GEN" to check, but it gives Generation Error when I run it. No diagonsis attached to that error.
When I tried to use the transaction and check for inconsistency, it says the POS is not active.
Please give me more pointers to check.
Regards,
Rajesh Manoharan
Similar Messages
-
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating any message mapping in IR: very strange
hi forum i m getting an error in IR while activating any messageMapping.
the error is too long to be posted....i m posting a few lines of that:
Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))Sudeep,
Let we try this way. I'm sure you might have some existing mapping objects in IR.
Try to change that object(Description give some name) and activate again the object.
Reply your results whether you are getting the same error.
One sec before changing the object just test the mapping and change the object.
Best regards,
raj. -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
Error while activating message mapping
Hi,
We are trying to activate message mappings and getting error as CHECK_EXCEPTION and in error details its showing that usr/sap/server.........................../classpath_resolver/Map.......................no such file or directory.........
What can be the issue?We can activate all other objects(DT,MT,IM,etc)
Best Regards,
Harleen Kaur ChadhaHi
Check this thread you can find the reason for this error CHECK_EXCEPTION solved here
Activating Object in IR - Getting Null Pointer Exception
Re: mapping test error
Internal error while checking object Message Mapping...
Problem Activating Mappings in the IR
Message Mapping activation Error
Regards
Abhishek -
Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A -
Error While activating 0Material(BI7)
Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arunDear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun -
Error while activating DTP in BI 7.0
I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK -
Error while Activating Inventory record in WM
Hi All,
I am getting an error while activating Inventory record using LI02N ,The Inventory record has been created using LICC Cycle Inventory at Quant Level.The error detrails are as below:
Message Text:
Function code cannot be selected
Technical Data
Message type__________ A (Cancel)
Message class_________ BL (Application Log)
Message number________ 001
Message variable 1____ Function code cannot be selected
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 4 (Additional information)
Sort criterion________
Number________________
Thanks you all in Advance.
Regards,
NVKI am encountering a similar error whils tryng to create or display WM Physical Inventory documents.
Tx: LX16 - Error Message no. BL001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Tx: LI01N and LI03N u2013 Error Message no. L4001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Errors when trying to create or display PIs, but can run reports on u201CWH1u201D and configuration looks ok?
I cannot find anthing n SAP OSS for WM.
Any assistance would be appreciated. -
Error while activating Queue XBTR* in Manage Queues in TCODE sxmb_adm
Hello Experts,
SAP PI is sending the data to ECC through inbound proxy in PI SXMB_MONI it is showing Black colur flag as it is through but in R3 SXMB_MONI messages are in green colur flag showing it is in scheduled state.Data is in quues in SMQ2.
While i try to activate queues in SXMB_ADM it throwing as Error while activating Queue XBTR*
XBTR Queue is in SMQ2.
Regards
NareshHello Naresh,
Check if the queue XBTR* is already registered in your SAP R3 server.
You have to do it first, if not already done.
Regards,
Subhajit -
SAP HANA: Error while activating Graphical Calculation Views
Hello,
I am receiving the below error while activating a Graphical Calculation View.
I am getting this error lately. Not sure what is causing this because the calculation views worked just fine before.
It is failing at the Repository Activation step with the Activation ID 2146.
It says - Repository: Revalidation failed for at least one object.
MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="sflight/GC_AGENCY_REVENUE" schema="_SYS_BIC"><dataSources><tableDataSource name="SBOOK" schema="SFLIGHT" table="SBOOK"><attributes><allAttribute /></attributes></tableDataSource><tableDataSource name="STRAVELAG" schema="SFLIGHT" table="STRAVELAG"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><join name="Join_1" type="inner"><viewAttributes><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="MANDT" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="AGENCYNUM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="FORCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="LOCCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="NAME" /></viewAttributes><inputs><input name="SBOOK"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="FORCURAM" target="FORCURAM"/><mapping source="LOCCURAM" target="LOCCURAM"/></input><input name="STRAVELAG"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="NAME" target="NAME"/></input></inputs><joinAttributes><joinAttribute excludeFlag="false" name="MANDT" /><joinAttribute excludeFlag="false" name="AGENCYNUM" /></joinAttributes></join><aggregation name="finalAggregation" defaultViewFlag="true"><inputs><input name="Join_1"><mapping source="NAME" target="NAME"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="MANDT" target="MANDT"/><mapping source="LOCCURAM" target="LOCCURAM"/><mapping source="FORCURAM" target="FORCURAM"/></input></inputs><viewAttributes><viewAttribute name="NAME"/><viewAttribute name="AGENCYNUM"/><viewAttribute name="MANDT"/></viewAttributes><keyfigures><keyfigure name="LOCCURAM" aggregationType="sum"/><keyfigure name="FORCURAM" aggregationType="sum"/><keyfigure name="row.count" datatype="int" isVisible="false" aggregationType="count"/></keyfigures><calculationNodeHints countStarAttribute="row.count"/></aggregation></calculationViews></calculationScenario></cubeSchema>nVersion: 33n
I am using the SFLIGHT schema which is provided by SAP.
Any pointer is appreciated.Hi Murali
I met the exactly same issue when I try to activate a graphical calculation views.
I created a new user in HANA db, then create a simple graphical calculation view(just from one table from this user). It doesn't work. All attribute views work fine. There's no related column view under _sys_bic.
HANA database version is 1.00.31 runs on HP DL580 512GB. And here's the error message -
"MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="co-pc-river/CALC_TEST1" schema="_SYS_BIC"><dataSources><tableDataSource name="JEST" schema="GLR" table="JEST"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><projection name="finalProjection" defaultViewFlag="true"><inputs><input name="JEST"><mapping source="MANDT" target="MANDT"/><mapping source="OBJNR" target="OBJNR"/><mapping source="STAT" target="STAT"/><mapping source="INACT" target="INACT"/></input></inputs><viewAttributes><viewAttribute name="MANDT"/><viewAttribute name="OBJNR"/><viewAttribute name="STAT"/><viewAttribute name="INACT"/></viewAttributes></projection></calculationViews></calculationScenario></cubeSchema>nVersion: 64n"
Best Regards
Mao Mingqi -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error while activating Transfer Structure
Hi Expert,
we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
Regards,Hi Dubey,
I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix this.
Thanks,
Renu
Maybe you are looking for
-
Display Several Sales Orders from Same Business Customer TOGETHER in MD04
Hello In MD04 is it possible to display several sales orders from same business customer together? For instance one business customer order bikes for two times. The Order-No are 12912(50st by 07/08/09) and 12913(100st by 10/08/09). Normally after run
-
With Word 2007 & Adobe Acrobat 8 - Unable to convert to PDF
I do not have the PDF Maker icons available on my Office Word 2007 application. I tried to go through my Adobe Acrobat 8 Standard application as well and it stated that it doesn't support the document that I'm trying to convert and to go to Print to
-
i have create 1 trigger to control 1 table..?? how could i apply this trigger to all table in this database..??
-
What is this and where do I get it?
This post has been scrubbed because it won't work.
-
Guys, Im installing unity 8.0.3 , but unfortunately stuck at " cisco data store" .When i searched google itsays to install "sql server 2005 sp3" or"sql server express 2005 sp3". I installed express , but unity assistant still shows the result as "