Error while activating query element.

Dear All
              Can any one tell this error .
              When iam transporting the queries to BI production there is an errror in Transportation log that  error while activating query element.
But  the querysis fine in Bi quality.
Error : Error while activating "6899QYGVHJPGYUBLKA9SPHORZ".

Hi
Might be that query element was deleted(not used n was used before in dev) while creating cross check once in your query.
First check what is that element which is not transported?
use table RSZELTDIR to find out weather its a Var or CKF or RKF etc...
then check for the same in the query in QA weather its active and ported fine to QA if not try to collect the element and transport to QA in a separate request.
Regards
KP

Similar Messages

  • Error while Activating / running Bex queries/reports

    Hello
    I have following ERRORs while activating / running BEx reports/queries.
    1. While Activating BEx reports, I keel getting following ERRORS
    Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
    Error when activating element BX7FOOKQB4588RROCBTC2YVZN
    BEx transport request 'BIDK901352' is not available or not suitable
    2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
    3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
    4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ? 
    Thanks, Sorry I have asked multiple questions, in jst one thread.
    BI

    Goto SE03 -->Search for Objects in Requests/Tasks  option , select the object type and execute it will give all the transports it has collected before ..
    Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
    Thanks,
    Ravi

  • Error while activating in 3.1H

    Hi Guys,
    I have an issue, I am copying a standard program for payment advice RFFOD__V into a Z-program ZRFOF__V and is working fine.
    Now I have got another copy of RFFOD__V i.e. ZRFOD_B from a portugal system and now when I am try to copy the program ZRFOD_B from Portugal system to my system, I am getting some errors while activating stating that some data elements are not defined. The same data elements are used in the standard program RFFOD__V and is activating correctly, it is also working fine with ZRFOF__V, the problem only lies with ZRFOD_B.
    Please note that I am using 3.1H system. Also please let me know how do you activate multiple programs together (i.e. a program and certain includes in 3.1H system).
    Awaiting for your reply,
    Thanks and Regards.
    Mohammed.

    Mohammed:
    It's been a while since I used 3.1H, but when you go to activate your program, doesn't it give you a list of all inactive objects?  If so, can't you highlight the program and all related includes and click on the green check mark to activate all programs at the same time?
    .. Craig

  • Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

    Hi,
      I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
      1.  Transfer structure 0CUSTOMER_TEXT_BA does not exist and
      2.   Data element for TXTMD could not be created.
      Can you please suggest me how to resolve these issues ?

    did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

  • Error while activating r/3 souce system

    hello guys ,
      encounterd an error while activating the r/3 source system ...
    rsa1> source system> r/3 ( activate)
    errors :  " entry in inbound table is not found"
              "entry in outbound table is not found "
    as a result r/3 source system is not activated .
    so kindly reply to the above query..
    thanks
    kk

    Hi Krishna,
    The connection to R/3 is not correctly set.
    The partner profiles are not available in this case. You can check this in T-code WE20 in R/3 under type LS.
    Please recreate the source system in BW from RSA1.
    Reagrds,
    Amol

  • Error while activating a routine  "no object list"

    hi
    I am getting a error while activating a routine Rv50c601
    "There is no object list for INCLUDEs"  Please suggest on the error and resoulution
    regards
    Nishant

    Try running program RV80HGEN.
    Regards,
    Naiimesh Patel

  • Error while activating transformation  ----   Message no. RSTRAN510

    Hi,
    while I am Extrating Data From Flat File I encountered this Error.
    I am working on <b>ECC 6.0 , BI 7.0.</b>
    I am trying this one in IDES, it is newly installed server.
    For Flat File Extraction I follwed the Steps
    1) I created Data source -
    let us assume I have created a Flat File with 3 fields
    SNO SNAME MARKS
    File is located in workstation
    Data source created successfull , I have checked in preview.
    2) I have created 2 key Figures, 1 characteristic
    3) I have created Infocube
    <b>here I have some doubt</b>
    while I am creating Infocube, the look and Feel is very different to 3.XX
    when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
    when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
    I created Like this
    select
    Info Area -
    > create Info cube   -
    given name of the cube and create (F5).
    the Info cube window displayed on the Right side
    Then I did like this
    select
    key Figures -
    > Info object Direct Input   
    Then I inserted my two key figures SNO,MARKS
    --- continue (F5)
    Dimension 1 -
    >  Info object Direct Input    
    I inserted the 1 char  SNAME
    --- continue (F5)
    Then I saved the Info cube
    Info cube saved successfull and activated successfull
    <b>Is it Right way For create InfoCube ?</b>
    4) I created Transfomation for the Data source
    Data source -
    > create Transfomation
    I have given
    Object Type  : InfoCube
    Name           :YSTU    - i selected which I already created.
    It automaticall taken these parameters
    Obejct Type     : DataSource
    Data source     : YSTU
    source system :PC_FILE
    create Transformation (Enter)
    I got the Error
    <b>Cannot generate proposal</b>
    <b>Message no. RSTRAN017</b>
    Then I try to activate, I got the Error.
    <b>Error while activating transformation</b>
    <b>Message no. RSTRAN510</b>
    Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
    I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
    I did mistake any where.
    Help me to Find the solution...
    sure you can get the points
    Thanks
    prasanna

    Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
    and i created Info Package too for the Data source , created successfully.
    I am struck on Final step  <b>creating DTP</b>
    when I am creating DTP
    Data Transfer Proc  : here I need to give the Dtp name ex: YDTP
    DTP Type               : Standard (Can be sheduled)
    Target of DTP
    <b>Object Type</b>       : Info cube
    <b>Name </b>               : YSTU  (This is my Cube Name)
    Source of DTP
    <b>Object Type</b>     : Data source  (It automatically Taken)
    <b>Data source</b>     : This is Disabled
    <b>Source system</b>:  This is Disabled
    continue (Enter)
    I got the message ?
    <b>Specify Name of source</b>
    and courser is in <b>Data Transfer Proc </b>
    Thanks
    prasanna

  • Error while activating Transformations

    Hi gurus,
    Iam facing a problem while activating Transformations.
    Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL  Data type is Amount, currency is fixed INR.
    But iam getting following errors while activating transformations.
    1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
    2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
    3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
    Regards
    Amar.

    Hi,
    Map it with required Unit filed from your Source .
    Mayank

  • Error while activating transformation

    Hi Experts,
    I need to activate a transformation between a cube and DSO.
    But I am getting an error message while activating the Transformation the messages are as followed.
    1. Error when writing routines
       Message Number. RSAA561
    2. Error while activating transformation
        Message Number. RSTRAN510
    3. Error activating transformation.
       Message number. RSO404
    I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
    Regards
    Shubh Karan

    Might be a problem with the time conversion routines. delete the transformationa nd try again.
    Good luck,
    vijay

  • Error while Activating DSO Data

    Hello
    I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
    "Activation of M records from DataStore object 0FIAR_O03 terminated"
    Thanks

    Hi,
    The activation would have failed due to varies reasons..
    It would be a short dump,check in ST22.
    check the job log in SM37 for better understanding of the issue.
    Have you loaded the respective master data?
    if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
    So if the master data is not loaded then the activation would fail.
    It can also be due to the system performance at that moment.
    Even if the data volume is huge ,there are chances of the activation failing..
    Try repeating the activation once again.it might succeed..
    Else check the logs to understand the actual issue.

  • Error while activating DSO

    Hi,
            I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
    "Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
    Message no. BRAIN290
    Diagnosis
    Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
    Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
    Procedure
    Check the origin of the characteristic value. If possible, change the characteristic value in the source.
    Incorrect source text in update routines and transfer routines can also cause this problem."
    Any thoughts how I should correct/

    Hi Tanu,
    this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
    Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
    Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
    This should correct the issue.
    regards,
    Naveen.A

  • Error While activating 0Material(BI7)

    Dear Gurus,
                     I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
    manythanks
    arun

    Dear gurus,
                     We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
    1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
    2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited".  Guys could u help us with this??
    manythanks
    arun

  • Error while activating Infocube

    Following error while activating after creating new Infocube:
    No active nametab exists for /BIC/DDPCW14DFD1     
    Termination due to inconsistencies     
    Table /BIC/DDPCW14DFD1 (Statements could not be generated)     
    Enhancement category for table missing     
    The cube is being made as a exact copy of an existing activated and correctly working cube.
    Can anyone shed some light on this?
    ======================================
    MORE detailed error:
    RED- Error
    GREEN-Fine
    YELLOW-Warning
    RED     Error/warning in dict. activator, detailed log  --> Detail     
    GREEN     Activate table /BIC/DDPCW14DFD1     
    YELLO     Enhancement category for table missing     
    YELLO     Enhancement category for include or subtype missing     
    GREEN     A table called /BIC/DDPCW14DFD1 exists in the database     
    RED     No active nametab exists for /BIC/DDPCW14DFD1     
    RED     Termination due to inconsistencies     
    RED     Table /BIC/DDPCW14DFD1 (Statements could not be generated)     
    GREEN     Error number in DD_DECIDE (9)     
    YELLO     Flag: 'Incorrect enhancement category' could not be updated     
    GREEN     Table /BIC/DDPCW14DFD1 was not activated     
    GREEN     Activate table /BIC/DDPCW14DFD2     
    YELLO     Enhancement category for table missing     
    YELLO     Enhancement category for include or subtype missing     
    GREEN     Table /BIC/DDPCW14DFD2 must be created in the database     
    =============
    Thanks,
    Mohnish

    Can i know in which environment are you working? BW 3.5 OR BI 7?

  • Error while activating Transformation CO_OM_WBS_3

    Hi everybody,
    i get the following error message while activating the transformation for  CO_OM_WBS_3 in Dev
    Error while activating transformation
    Message no. RSTRAN510
    Error when writing routines
    i checked the routine for co_om_wbs_3 the syntex was correct.
    i have checked in forum am not getting clear picture  please guide me and
    sap component version : SAP EHP 1 for SAP NetWeaver 7.0
    SAP_BW    7010006    SAPKW70106
    BI_CONT    704   0006  SAPK-70406INBICONT
    Regards,
    Sunder

    Dear anand,
    thankyou
    Regards,
    sunder
    Edited by: sundersham on Mar 28, 2010 12:34 PM

Maybe you are looking for