Error while activating r/3 souce system
hello guys ,
encounterd an error while activating the r/3 source system ...
rsa1> source system> r/3 ( activate)
errors : " entry in inbound table is not found"
"entry in outbound table is not found "
as a result r/3 source system is not activated .
so kindly reply to the above query..
thanks
kk
Hi Krishna,
The connection to R/3 is not correctly set.
The partner profiles are not available in this case. You can check this in T-code WE20 in R/3 under type LS.
Please recreate the source system in BW from RSA1.
Reagrds,
Amol
Similar Messages
-
Getting Runtime Error while Activating Characteristics in BW sandbox system
Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AMHi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards. -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A -
Error While activating 0Material(BI7)
Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arunDear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun -
Error while activating in 3.1H
Hi Guys,
I have an issue, I am copying a standard program for payment advice RFFOD__V into a Z-program ZRFOF__V and is working fine.
Now I have got another copy of RFFOD__V i.e. ZRFOD_B from a portugal system and now when I am try to copy the program ZRFOD_B from Portugal system to my system, I am getting some errors while activating stating that some data elements are not defined. The same data elements are used in the standard program RFFOD__V and is activating correctly, it is also working fine with ZRFOF__V, the problem only lies with ZRFOD_B.
Please note that I am using 3.1H system. Also please let me know how do you activate multiple programs together (i.e. a program and certain includes in 3.1H system).
Awaiting for your reply,
Thanks and Regards.
Mohammed.Mohammed:
It's been a while since I used 3.1H, but when you go to activate your program, doesn't it give you a list of all inactive objects? If so, can't you highlight the program and all related includes and click on the green check mark to activate all programs at the same time?
.. Craig -
Error while activating multiple requests in ODS.
Hi All,
I get a "ORA-12801: unable to extend temp segment" error while activating an ODS. The problem is I selected 7 requests for activation and my Basis guy tells me he cannot add any more files to the temp tablespace.
I guess the solution would be to re-activate one request at a time. However now the dependency has been enforced between the requests and I cannot activate a single without selecting the other requests.
I even, subsequently, selected "Do not condense option..." AND the "Process Request serially" options. I get the same error.
Is there a ABAP report that can turn off this inter request dependency ?
Thanks.
Dorothy.Thank you for the quick reply !
Dinesh: I looked at the note. It applies to oracle systems < 9.2.0.6. We are at 9.2.0.6. The paramter COMPNOMERGE is missing in RSADMIN table. The note however is right on the money for the problem I am experiencing.
Bhanu: I applied your suggestion. The test yielded no errors. -
Error while processing message to remote system
Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
RaghavendraHi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha. -
Error while activating the transformation for cube
Hi everyone,
I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and 'unit of measure is not used' even though I hav assigned both the fields to Amount infoobject.
would plz explain in detail.
Thank you.Hi,
Are you loading from the Flat File or from ECC?
If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
Then when you create the Transformation then the Rules will be created Automatically.
Regards,
rik -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error while activating Transfer Structure
Hi Expert,
we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
Regards,Hi Dubey,
I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix this.
Thanks,
Renu -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul... -
Error while activating Trnasfer rules
I am getting the following error, while activating Infosource. Can you please help me identifying the solution
Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
Diagnosis
"ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or ...Hi,
Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
1. Drop the Source System
2. Re-Create the Source System.
3. For other than PC Files, "Replicate the DataSources" in the Source System.
4. Try mapping the transfer rules / structure and activate it.
Also check the SAP Note no :147195
Hope this works.
Regards
Pavan Prakhya
Maybe you are looking for
-
I put the password in my Ipod and now I am trying to put it again but it is not working....I tried to connect with the Itunes and it is not working because to the Itunes work with my Ipod, I need the password first, which I do not know. In my Ipod is
-
Cannot print with Lexmark 7600 after installing Lion
Since installing Lion I haven't been abe to print. I use a Lexmark 7600 series. I reinstalled the printer a couple of times and I just downloaded the latest software update for the printer. The printer installs and I can see it in my system prefer
-
NetInstalls/Restores Failing - Constant Kernel Panics
Hello all - Before I begin, I admit to being a little over my skis and a bit of a rube when it comes to this stuff - I know just enough to royally screw stuff up. I've tried to do my due diligence in searching on the topic but haven't come up with a
-
Quicktime not an option on Sequence settings Video preview
In the sequence settings, under video preview, "Quicktime" is not listed as a Preview File Format. Running Windows 8.1, 64bit I have installed the latest Quicktime, uninstalled it, reinstalled it, repaired it, to no avail. Also I have done the same w
-
Help (F1) function not working
Acrobat 9.0: Trying to use the in-software help, I get only a basic introductory web page. No real contents or searchable help. Is this normal, or is it broken. How to fix it? ("repair acrobat" from the help menu did not fix it.)